2,000+ Results for Media Converters & Data Adapter Kits - Page 8
Key Features:
- Width: 1.8 in
- Depth: 3.4 in
- Height: 0.8 in
Key Features:
- Size: Maximum frame size of 10,240 bytes -- Gigabit; Maximum frame size of 2048 bytes -- Fast Ethernet
- Fiber Duplex (FDF): This green LED is operational only when power is applied. The LED is on when the 10/100/1000Base-X link is operatinal in full duplex mode. The LED is off when in half duplex.
- Power Connector: 2-pin pluggable terminal block
Key Features:
- Input power: Dual 50~57 VDC voltage power inputs at 4-pin terminal block
- Shock: IEC60068-2-27
- 10/100Base-T(X) RJ45 port indicator: Green for port Link/Act - (ON) Link up / (Blinking) Acting / (OFF) ; Link down; Amber for 100Mbps/10Mbps indicator - (ON) Working at 100Mbps / (OFF) ; Working at 10Mbps; Green for port duplex indicator - (ON) Full-Duplex / (OFF) Half-Duplex
Key Features:
- Size: Maximum frame size of 10,240 bytes -- Gigabit Maximum frame size of 2048 bytes -- Fast Ethernet
- Dimensions: 150 x 95 x 26 mm, 5.9 x 3.7 x 1.0 inches
- Electrical Safety: UL 60950-1
Key Features:
- Depth: 4.7 in
- Size: Maximum frame size of 2048 bytes
- Height: 1 in
Key Features:
- Heat Output ( BTU/HR ): 6.8
- Fiber Optic Cable: Dual ST Media Converters ; Multimode: 62.5 / 125, 50/125, 85/125, 100/140 micron; Single Mode: 9/125 micron (ITu-T 625)
- Pause: Pause should be enabled when all devices connected to the media converter support pause. Auto-Negotiation must be Enabled to use this feature; Enabled (Default)- The Media converter will advertise Pause capability during Auto-Negotiation on the 100Base-TX interface; Disabled- The Media converter will advertise that it does not have Pause capability during Auto-Negotiation on the 100Base-TX interface.
Key Features:
- Power Reverse: Present
- Multi-mode (EKI-2741SX/SXI): Wavelength: 850 nm ; Tx Power: -4/-9.5 dBm ; Rx Sensitivity: -18 dBm ; Parameters: 50/125 um, 62.5/125 um
- Storage Humidity: 10 ~ 95% (non-condensing)
Key Features:
- Immunity: EN55024
- Pause: When Fiber Auto Negotiation is disabled Pause should only be enabled when all devices connected to the media converter support pause; Enabled(Default)- The Media converter will advertise Pause capable, Asymmetric pause not needed during Auto-Negotiation; Disabled- The Media converter will advertise that it does not have Pause capability during Auto-Negotiation.
- Remote Loopback: The media converter can perform a loopback on the 1000Base-X fiber interface; Disabled (Default - Up); Enabled- The 1000Base-X receiver is looped to the 1000Base-X transmitter. The 1000Base-T transmitter is taken off the interface.
Key Features:
- Size: Maximum frame size of 10,240 bytes
- Product Type: Transceiver/Media Converter
- Fiber Optic Wavelength: 1310 nm
Key Features:
- Size: Maximum frame size of 2048 bytes
- Current: 175 mA
- Filtering: 1024 MAC Addresses
Key Features:
- Data Bits: 5, 6, 7, 8
- Ambient Relative Humidity: 5 to 95% (non-condensing)
- Speed: 480 Mbps (Hi-Speed USB) and 12 Mbps (Full-Speed USB)
Key Features:
- Size: Maximum frame size of 10,240 bytes -- Gigabit; Maximum frame size of 2048 bytes -- Fast Ethernet
- Fiber Fault Alert: The Fiber Fault Alert switch has meaning when Auto-Negotiation is disabled; Enabled (Default - Up); When the 1000Base-X receiver is off the 1000Base-X transmitter is turned off. Periodically the 1000Base-X receiver will be turned on for a short period to allow the condition to clear if the 1000Base-X link partner is using a similar feature; Disabled (Down)
- Electrical Safety: UL 60950-1
Key Features:
- EMI: FCC Part 15 Subpart B Class B
- Time: 2,272,562 hrs
- EMC: CE, FCC
Key Features:
- Size: Maximum frame size of 10,240 bytes -- Gigabit; Maximum frame size of 2048 bytes -- Fast Ethernet
- Power Over Ethernet (PSE): up to 100 watts per port
- Heat Output ( BTU/HR ): 1 x 10/100/1000Base-T port models: 13.65 BTU/hr; 2 x 10/100/1000Base-T port models: 16 BTU/hr
Key Features:
- Emissions: FCC Part 15 Class A, EN55022 Class A
- Heat Output ( BTU/HR ): 8.53
- Fiber Fault Alert: Enabled - (default up)- If the media converter detects a loss of fiber signal on a fiber receiver, it will immediately disable its fiber transmitter signal. This, in effect, notifies the remote fiber link partner that an error condition exists on the fiber connection. The setting of this switch applies to both fiber ports; Disabled: The media converter will not monitor for fiber fault or generate them.
Key Features:
- Standards: MIL-HDBK-217F
- Input Current: 265 mA @ 12 to 48 VDC
- IP Rating: IP30
Key Features:
- Optical Isolation: 2.5 kV rms for 1 minute (TCC-80I only)
- Source of Input Power: RS-232 port (TxD, RTS, DTR) or power input jack
- EMS: EN 61000-4-2 (ESD) Level 2; EN 61000-4-3 (RS) Level 2; EN 61000-4-4 (EFT) Level 2; EN 61000-4-5 (Surge) Level 3; EN 61000-4-6 (CS) Level 2; EN 61000-4-8 (SFMF) Level 1
Key Features:
- Color: green
- Depth: 4.1 in
- Height: 3.9 in
About Media Converters & Data Adapter Kits
Media Converters & Data Adapter Kits are used to convert data signals between different types of media, such as coaxial cables, twisted pair cables, and fiber optic cables. These kits allow for the transmission of data over long distances while maintaining the integrity of the signal.
Types of Media Converters & Data Adapter Kits
Media Converters & Data Adapter Kits come in a variety of forms and configurations depending on the type of media being converted. Different kits may have different components that support various protocols or have different power requirements. Some kits also provide additional features such as signal amplification or frequency conversion.
How Media Converters & Data Adapter Kits are Made
Media Converters & Data Adapter Kits are typically constructed with components like transceivers, connectors, power supplies, and circuit boards. They are designed to be compatible with multiple communication protocols and can often be customized for specific applications.
Industries that use Media Converters & Data Adapter Kits
Media Converters & Data Adapter Kits are commonly used in a variety of industries including telecommunications, aerospace engineering, automotive manufacturing, and medical device production. Professionals in these fields rely on these kits to enable efficient data transmission across long distances.
Find the Media Converters & Data Adapter Kits You Need at Zoro
Looking for a specific item? Use our robust search tool to find it by name or keyword, or use our handy filters to narrow down our full assortment. You can also check out our whole selection of electrical supplies, along with other tools or equipment to ensure you have all you need to tackle the job, especially if you're taking on a DIY project for the first time. Plus, when you shop at Zoro, you'll always enjoy competitive prices on tons of great brands you know and trust. We make the shopping experience as fast and seamless as possible with free shipping on orders over $50 for registered users, Net 30 payment terms for qualifying customers, and an unparalleled customer service experience.