2,000+ Results for Media Converters & Data Adapter Kits - Page 15
Key Features:
- Weight (Approximate): 5.28 oz
- Environmentally Friendly: Yes
- Maximum Distance Supported: 1.24 Mile
Key Features:
- Size: Maximum frame size of 10,240 bytes
- Current: 0.09 A (@ 24VDC)
- Fiber Optic Cable: Multimode: 62.5 / 125, 50/125, 85/125, 100/140 micron; Single Mode: 9/125 micron (ITu-T 625)
Key Features:
- Current: 0.29 amps
- Storage Humidity: 5% to 95% non-condensing
- Fiber link 1 / Receive activity (LK1): This green LED is operational only when power is applied. The LED is on when the 100Base-X link is on and flashes with a 50% duty cycle when data is received.
Key Features:
- Width: 3.1 in
- Depth: 4.7 in
- Size: Maximum frame size of 10,240 bytes -- Gigabit; Maximum frame size of 2048 bytes -- Fast Ethernet
Key Features:
- Size: Maximum frame size of 10,240 bytes
- Chassis: Molded plastic DIN Rail case with an IP20 ingress protection rating
- Immunity: EN55024; EN 61000-4-2 (ESD); EN 61000-4-3 (RS); EN 61000-4-4 (EFT); EN 61000-4-5 (Surge); EN 61000-4-6 (CS); EN 61000-4-8 (PFMF); EN 61000-4-11; IEC/EN 61000-6-2 (General Immunity for Industrial Environments)
Key Features:
- Width: 4.5 in
- Height: 0.9 in
- Size: Maximum frame size of 10,240 bytes
Key Features:
- Size: Maximum frame size of 10,240 bytes
- Bit Error Rate (BER): <10-12
- Auto-Negotiation: Auto (Deafault-Up): In this mode of operation the media converter will negotiate Ethernet parameters on both the copper and the fiber connection. This will ensure the most optimal connection parameters will be in effect. If connecting to another Perle Gigabit Media Converter, this parameter should be set to Auto; Off: The fiber Negotiation should only be turned off, if the fiber link partner does not support fiber link negotiations
Key Features:
- Height: 0.9 in
- Size: Maximum frame size of 10,240 bytes
- Depth: 3.9 in
Key Features:
- Size: Maximum frame size of 10,240 bytes -- Gigabit; Maximum frame size of 2048 bytes -- Fast Ethernet
- Network Technology: 10/100/1000Base-T, 1000Base-LX/LH
- Product Name: C-1110-S2SC10 Media Converter
Key Features:
- Size: Maximum frame size of 10,240 bytes -- Gigabit; Maximum frame size of 2048 bytes -- Fast Ethernet
- Speed Copper: 100 (Default); 10
- Duplex Fiber: Full (Default); Half
Key Features:
- Size: Maximum frame size of 2048 bytes
- Emissions: FCC Part 15 Class B*, EN55022 Class B*
- Copper link on / Receive activity (LKC): This green LED is operational only when power is applied. The LED is on ; when the 100Base-TX link is on and flashes with a 50% duty cycle when ; data is received.
Key Features:
- Size: Maximum frame size of 2048 bytes
- Storage temperature: minimum range of -25 C to 70 C (-13 F to 158 F)
- Link Pass Through: Enabled (Default)- ; When the state of the receiver is changed on the 100Base-TX interface it ; is reflected on the 100Base-FX fiber transmitter. When the state of the ; receiver on the 100Base-FX interface is changed it is reflected on the ; 100Base-TX transmitter; When a Far-End Fault Indication is received on the fiber interface the ; 100Base-TX transmitter is turned off. When the Far-End Fault Indication ; is cleared the transmitter is turned back on; Disabled- The ; 100Base-TX and the 100Base-FX fiber interface operate independently. ; Far-End Fault indication on the 100Base-FX fiber interface has no effect ; on the 100Base-TX interface.
Key Features:
- Size: Maximum frame size of 2048 bytes
- Copper link on / Receive activity ( LKC 1/2 ): This green LED is operational only when power is applied. The LED will blink along with transmit/receive data on the 10/100/1000 UTP port; If a loss of link on the copper port results in a Link Passthrough condition to the fiber port, this LED will blink at a rate of once every 2 seconds until the condition is cleared.
- PSE Status: This LED will signify the status of the PSE function. Using multi-color and blinking the unit will show the following status for the PSE; GREEN - Solid: The PSE has successfully detected a compliant PD and is applying power over the UTP (for legacy pin out simply show active power when applied); YELLOW - Solid: The PSE is not active. This means the PSE has been configured to provide power, but the PD is : Not connected; Has not detected a compliant PD and is not applying power; PSE has turned off power for Reset function; OFF - PSE function switch disabled; RED - Blinking: Error Conditions; Capacitance too High - 1 blink; Resistance too Low or short circuit - 2 blinks; Resistance too high or open circuit - 3 blinks
Key Features:
- Width: 3.1 in
- Size: Maximum frame size of 2048 bytes
- Height: 1 in
Key Features:
- Size: Maximum frame size of 10,240 bytes
- Power / TST: This green LED is turned on when power is applied to the media converter. Otherwise it is off. The LED will blink fast/slow when in Loopback test mode or hardware error.
- Fixed Fiber: Dual multimode or single mode ( Duplex ) fiber - SC, ST; Single strand fiber ( Simplex ) - SC
Key Features:
- Size: Maximum frame size of 10,240 bytes -- Gigabit; Maximum frame size of 2048 bytes -- Fast Ethernet
- 10/100/1000 Speed: This multi-color LED is operational only when power is applied. The LED is green when the speed of the copper ethernet port is running at 1000 Mbps. The LED is orange when the speed of the copper Ethernet port is running at 100 Mbps. The LED is off when in 10 Mbps.
- 10/100/1000Base-T: RJ45 connector; 2 pair CAT5, EIA/TIA 568A/B or better cable for 10/100; 4 pair CAT5 UTP cable for Gigabit; Single mode dual LC or multimode dual LC Media Converter; by using a mode conditioning patch cord
Key Features:
- Size: Maximum frame size of 2048 bytes
- Universal AC/DC adapter: 100-240v AC, regulated DC adapter included
- Auto-MDIX (Internal Strap): If Auto-Negotiation (802.3u) is enabled, the media converter uses the HP Auto-MDIX method for the 100Base-TX interface. If Auto-Negotiation (802.3u) is disabled the Media converter will use the RX Energy method on the 100Base-TX interface to set the port MDI or MDIX whichever is appropriate; Enabled (Default)- Either a straight-through or crossover type cable can be used to connect the media converter to the device on the other end of the cable; Disabled- If the partner device on the other end of the cable does not have the Auto-MDIX feature a specific cable, either a straight-through or crossover will be required to ensure that the media converter's transmitter and the partner devices transmitter are connected to the others receiver. The Media converter's 100Base-TX port is configured as MDI-X with this switch setting.
Key Features:
- Size: Maximum frame size of 2048 bytes
- Operating Altitude: Up to 3,048 meters (10,000 feet)
- Link Pass Through: Enabled (Default)- ; When the state of the receiver is changed on the 100Base-TX interface it ; is reflected on the 100Base-FX fiber transmitter. When the state of the ; receiver on the 100Base-FX interface is changed it is reflected on the ; 100Base-TX transmitter; When a Far-End Fault Indication is received on the fiber interface the ; 100Base-TX transmitter is turned off. When the Far-End Fault Indication ; is cleared the transmitter is turned back on; Disabled- The ; 100Base-TX and the 100Base-FX fiber interface operate independently. ; Far-End Fault indication on the 100Base-FX fiber interface has no effect ; on the 100Base-TX interface.
Key Features:
- Fiber link 2 on / Receive activity (LK2): This green LED is operational only when power is applied. The LED is on when the 100Base-X link is on and flashes with a 50% duty cycle when data is received.
- Immunity: EN55024
- Maximum Power Consumption ( Watts ): 2.5
Key Features:
- Network Technology: 1000Base-SX
- Product Name: CM-1000MM-M2ST05 Transceiver
- Number of ST Ports: 2
Key Features:
- Size: Maximum frame size of 2048 bytes
- Link Pass Through: Enabled (Default)- When the state of the receiver is changed on the 100Base-TX interface it is reflected on the 100Base-FX fiber transmitter. When the state of the receiver on the 100Base-FX interface is changed it is reflected on the 100Base-TX transmitter; When a Far-End Fault Indication is received on the fiber interface the 100Base-TX transmitter is turned off. When the Far-End Fault Indication is cleared the transmitter is turned back on; Disabled- The 100Base-TX and the 100Base-FX fiber interface operate independently. Far-End Fault indication on the 100Base-FX fiber interface has no effect on the 100Base-TX interface.
- 100Base-TX: Single mode dual LC Media Converters; RJ45 connector, 2 pair CAT 5, EIA/TIA 568A/B or better cable
Key Features:
- Depth: 3.9 in
- Height: 0.9 in
- Width: 4.5 in
Key Features:
- Height: 0.9 in
- Width: 4.5 in
- Depth: 3.9 in
Key Features:
- Fiber Optic Cable: Multimode single SC Media Converters; Multimode: 62.5 / 125, 50/125, 85/125, 100/140 micron; Single Mode: 9/125 micron (ITU-T 625)
- Copper link on / Receive activity (LKC): This green LED is operational only when power is applied. The LED is on when the 100Base-TX link is on and flashes with a 50% duty cycle when data is received.
- Operating temperature: 0 C to 50 C (32 F to 122 F)
Key Features:
- Width: 3.1 in
- Depth: 4.7 in
- Height: 1 in
Key Features:
- Operating Humidity: 5% to 90% non-condensing
- Electrical Safety: UL 60950-1
- Maximum Power Consumption ( Watts ): 2.5
Key Features:
- Size: Maximum frame size of 2048 bytes
- Current: 175 mA
- Heat Output ( BTU/HR ): 7.2
Key Features:
- Laser Safety: EN 60825-1:2007
- Electrical Safety: UL 60950-1
- Edge Connecter: 32 pin DIN 41612 / IEC 60603-2 Type B/2 Male. Fist make, last break for ground and power
Key Features:
- Bit Error Rate (BER): <10-12
- 1000Base-T: Multimode dual ST Media Converter; RJ45 connector, 4 pair CAT 5 UTP cable or cable
- Operating Altitude: Up to 3,048 meters (10,000 feet)
Key Features:
- Depth: 4.7 in
- Width: 3.1 in
- Size: Maximum frame size of 2048 bytes
Key Features:
- Width: 4.5 in
- Size: Maximum frame size of 10,240 bytes
- Height: 0.9 in
Key Features:
- Size: Maximum frame size of 2048 bytes
- Electrical Safety: UL 60950-1
- Magnetic Isolation: 1.5kv
Key Features:
- Compatibility: Perle Media Converter Chassis
- Network (RJ-45): Yes
- Environmentally Friendly: Yes
Key Features:
- Width: 4.5 in
- Depth: 3.9 in
- Size: Maximum frame size of 10,240 bytes
Key Features:
- Size: Maximum frame size of 10,240 bytes
- Smart Link Pass-Through: Standard Mode (Default-Up): In this mode, if Fiber Negotiation is set to OFF, the links on the fiber and copper sides can be brought up and down independently of each other. A loss of link on either the fiber link or copper link can take place without affecting the other connection. However, if the Fiber Negotiation (switch 2) is set to Auto, then a loss of link on the copper side will result in a loss of link on the fiber side but not vice versa; Smart Link Pass-Through (Down): In this mode, the link state on one connection is directly reflected through the media converter to the other connection. If link is lost on one of the connections, then the other link will be brought down by the media converter.
- Loopback: Disabled (Default-Up): The loopback feature is disabled. This is the normal position for regular operation. The switch must be set to this position for data to pass through the media converter; Enabled: This is a test mode. All data received on the receive (RX) fiber connection is looped back to the transmit (TX) fiber connection. The state of the copper is not relevant and no data or link status is passed through to the copper side.
Key Features:
- Depth: 3.9 in
- Width: 4.5 in
- Size: Maximum frame size of 10,240 bytes
About Media Converters & Data Adapter Kits
Media Converters & Data Adapter Kits are used to convert data signals between different types of media, such as coaxial cables, twisted pair cables, and fiber optic cables. These kits allow for the transmission of data over long distances while maintaining the integrity of the signal.
Types of Media Converters & Data Adapter Kits
Media Converters & Data Adapter Kits come in a variety of forms and configurations depending on the type of media being converted. Different kits may have different components that support various protocols or have different power requirements. Some kits also provide additional features such as signal amplification or frequency conversion.
How Media Converters & Data Adapter Kits are Made
Media Converters & Data Adapter Kits are typically constructed with components like transceivers, connectors, power supplies, and circuit boards. They are designed to be compatible with multiple communication protocols and can often be customized for specific applications.
Industries that use Media Converters & Data Adapter Kits
Media Converters & Data Adapter Kits are commonly used in a variety of industries including telecommunications, aerospace engineering, automotive manufacturing, and medical device production. Professionals in these fields rely on these kits to enable efficient data transmission across long distances.
Find the Media Converters & Data Adapter Kits You Need at Zoro
Looking for a specific item? Use our robust search tool to find it by name or keyword, or use our handy filters to narrow down our full assortment. You can also check out our whole selection of electrical supplies, along with other tools or equipment to ensure you have all you need to tackle the job, especially if you're taking on a DIY project for the first time. Plus, when you shop at Zoro, you'll always enjoy competitive prices on tons of great brands you know and trust. We make the shopping experience as fast and seamless as possible with free shipping on orders over $50 for registered users, Net 30 payment terms for qualifying customers, and an unparalleled customer service experience.