2,000+ Results for Media Converters & Data Adapter Kits - Page 17
Key Features:
- Over Current Protection: Protects against two signals shorted together
- Input Voltage: 12 to 48 VDC
- ESD Protection: 15 kV for all signals
Key Features:
- Storage temperature: minimum range of -25° C to 70° C (-13° F to 158° F)
- Heat Output ( BTU/HR ): 10.2
- Immunity: EN55024
Key Features:
- Time: 514,926 hrs
- RS-232 Signals: TxD, RxD, GND
- Ring Transmission: Half-duplex
Key Features:
- Standards: IEC 61158-2 for PROFIBUS DP
- EMI: EN 55022, Class A; EN 55024
- Operating temperature: Standard Models: 0 to 60°C (32 to 140°F); Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Key Features:
- Water and Dust Proof: IP30
- Baudrate: 50 bps to 921.6 kbps
- Time: 792,085 hrs
Key Features:
- Standards: IEEE 802.3 for 10BaseT; IEEE 802.3u for 100BaseT(X), 100BaseFX
- Storage temperature: -20 to 75°C (-4 to 167°F)
- EMS: EN 61000-4-2 (ESD): Contact: 4 kV; Air: 8 kV; EN 61000-4-3 (RS): 80 MHz to 1 GHz: 3 V/m; EN 61000-4-4 (EFT): Power: 1 kV; Signal: 0.5 kV; EN 61000-4-5 (Surge): Power: 1 kV; Signal: 0.5 kV; EN 61000-4-6 (CS): 150 kHz to 80 MHz: 3 V/m; EN 61000-4-8 (PFMF); EN
Key Features:
- Standards: MIL-HDBK-217F
- EMI: CISPR 32, FCC Part 15B Class A
- Overload Current Protection: Supported
Key Features:
- Size: Maximum frame size of 2048 bytes
- Power Consumption: 3.5 Watts
- Storage Humidity: 5% to 95% non-condensing
Key Features:
- Dimensions: 30.3 x 70 x 115 mm (1.19 x 2.76 x 4.53 in)
- Fiber Connector: SC or ST
- Ambient Relative Humidity: 5 to 95% (non-condensing)
Key Features:
- Width: 6.9 in
- Height: 0.9 in
- Depth: 5.7 in
Key Features:
- Size: Maximum frame size of 10,240 bytes -- Gigabit; Maximum frame size of 2048 bytes -- Fast Ethernet
- Product Name: C-1110-SFP Gigabit Ethernet Managed Media Converter
- Network Technology: 10/100/1000Base-T
Key Features:
- Width: 4.7 in
- Depth: 3.1 in
- Height: 1 in
Key Features:
- 1000Base-X: Multimode dual ST to single dual ST fiber connector model; Available in SC, ST and LC connector models
- Fiber Fault Alert: Enabled - (default up)- If the media converter detects a loss of fiber signal on a fiber receiver, it will immediately disable its fiber transmitter signal. This, in effect, notifies the remote fiber link partner that an error condition exists on the fiber connection. The setting of this switch applies to both fiber ports; Disabled: The media converter will not monitor for fiber fault or generate them; Enabled - The 1000Base-X receiver is looped to the 1000Base-X transmitter. Link #2's fiber transmitter is taken off the interface.
- Auto-Negotiation: Auto (default up)- Fiber Negotiation is performed for both fiber ports. Full and half duplex will be advertised. Pause will advertise support for Symmetrical and Asymmetrical Pause. Pause frame will not be acted upon or generated but will be passed through; Off- Negotiation on both fiber ports will be disabled. Settings of Link mode and Fiber fault alert will be determined by those switch settings. Pause frames will not be acted upon or generated but will continue to be passed through.
Key Features:
- EMS: IEC 61000-4-2 (ESD) Level 2; IEC 61000-4-3 (RS) Level 2; IEC 61000-4-4 (EFT) Level 2; IEC 61000-4-5 (Surge) Level 2; IEC 61000-4-6 (CS) Level 2; IEC 61000-4-8 (SFMF) Level 1
- Power Consumption: TCC-100/100-T: 85 mA @ 12 V; TCC-100I/100I-T: 150 mA @ 12 V
- Time: 3,017,857 hrs
Key Features:
- Standards: MIL-HDBK-217F
- IP Rating: IP30
- Vibration: IEC 60068-2-6
Key Features:
- Size: Maximum frame size of 2048 bytes
- Depth: 5.7 in
- Height: 0.9 in
Key Features:
- Size: Maximum frame size of 2048 bytes
- Fiber Optic Cable: Multimode: 62.5 / 125, 50/125, 85/125, 100/140 micron; Single Mode: 9/125 micron (ITU-T 625)
- 100/1000: Green - 1000 Mbps link; Yellow - 100 Mbps link; Off - 10 Mbps or no Link
Key Features:
- Height: 1 in
- Width: 3.1 in
- Depth: 4.7 in
Key Features:
- Electrical Safety: UL 60950-1
- Edge Connecter: 32 pin DIN 41612 / IEC 60603-2 Type B/2 Male. Fist make, last break for ground and power
- Card insertion and removal: Captive thumb screws enable fast insertion and removal. Can be further tighten with a screwdriver.
Key Features:
- RS-422 Signals: TxD+, TxD-, RxD+, RxD-, GND
- Database: Telcordia (Bellcore), GB
- Dimensions: 30.3 x 70 x 115 mm (1.19 x 2.76 x 4.53 in)
Key Features:
- Reverse Polarity Protection: Present
- Housing: Metal, IP30 protection
- Freefall: IEC 60068-2-32
Key Features:
- Tx Output: Single-mode: > -5 dBm; Multi-mode: > -5 dBm
- ESD Protection: 15 kV for all signals
- EMC: CE, FCC
Key Features:
- Card insertion and removal: Captive thumb screws enable fast insertion and removal. Can be further tighten with a screwdriver.
- Operating temperature: 0° C to 50° C (32° F to 122° F)
- Duplex: Full (Default-Up)- The media converter will advertise Full Duplex Capable, Half Duplex Capable; AUTO (Down)-The Media converter will advertise Full Duplex Not Capable, Half Duplex Capable.
About Media Converters & Data Adapter Kits
Media Converters & Data Adapter Kits are used to convert data signals between different types of media, such as coaxial cables, twisted pair cables, and fiber optic cables. These kits allow for the transmission of data over long distances while maintaining the integrity of the signal.
Types of Media Converters & Data Adapter Kits
Media Converters & Data Adapter Kits come in a variety of forms and configurations depending on the type of media being converted. Different kits may have different components that support various protocols or have different power requirements. Some kits also provide additional features such as signal amplification or frequency conversion.
How Media Converters & Data Adapter Kits are Made
Media Converters & Data Adapter Kits are typically constructed with components like transceivers, connectors, power supplies, and circuit boards. They are designed to be compatible with multiple communication protocols and can often be customized for specific applications.
Industries that use Media Converters & Data Adapter Kits
Media Converters & Data Adapter Kits are commonly used in a variety of industries including telecommunications, aerospace engineering, automotive manufacturing, and medical device production. Professionals in these fields rely on these kits to enable efficient data transmission across long distances.
Find the Media Converters & Data Adapter Kits You Need at Zoro
Looking for a specific item? Use our robust search tool to find it by name or keyword, or use our handy filters to narrow down our full assortment. You can also check out our whole selection of electrical supplies, along with other tools or equipment to ensure you have all you need to tackle the job, especially if you're taking on a DIY project for the first time. Plus, when you shop at Zoro, you'll always enjoy competitive prices on tons of great brands you know and trust. We make the shopping experience as fast and seamless as possible with free shipping on orders over $50 for registered users, Net 30 payment terms for qualifying customers, and an unparalleled customer service experience.