2,000+ Results for Media Converters & Data Adapter Kits - Page 16
Key Features:
- Size: Maximum frame size of 2048 bytes
- Edge Connecter: 32 pin DIN 41612 / IEC 60603-2 Type B/2 Male. Fist make, last break for ground and power
- Speed Copper: 100 (Default); 10
Key Features:
- Remote Loopback: The media converter can perform a loopback on the 100Base-X fiber ; interface; Disabled (Default - Up); Enabled- The ; 100Base-X receiver is looped to the 100Base-X transmitter. The ; 100Base-TX transmitter is taken off the interface.
- 100Base-TX: RJ45 connector, 2 pair CAT 5, EIA/TIA 568A/B or better cable
- Operating temperature: 0 C to 50 C (32 F to 122 F)
Key Features:
- Size: Maximum frame size of 10,240 bytes -- Gigabit; Maximum frame size of 2048 bytes -- Fast Ethernet
- Network Technology: 10/100/1000Base-T, 1000Base-BX
- Compatibility: Perle Media Converter Chassis
Key Features:
- Storage Humidity: 5% to 95% non-condensing
- Storage temperature: minimum range of -25 C to 70 C (-13 F to 158 F)
- Input Supply Voltage: 6 - 30 vDC, unregulated ( 12 vDC Nominal )
Key Features:
- Power / TST: This green LED is turned on when power is applied to the media converter. Otherwise it is off. The LED will blink slowly when in Loopback test mode.
- Auto-Negotiation: Auto (default up)- Fiber Negotiation is performed for both fiber ports. Full and half duplex will be advertised. Pause will advertise support for Symmetrical and Asymmetrical Pause. Pause frame will not be acted upon or generated but will be passed through; Off- Negotiation on both fiber ports will be disabled. Settings of Link mode and Fiber fault alert will be determined by those switch settings. Pause frames will not be acted upon or generated but will continue to be passed through.
- Remote Loopback #2: The media converter can perform a loopback on the link #2 fiber interface; Disabled (Default - Up); Enabled- The 1000Base-X receiver is looped to the 1000Base-X transmitter. Link #1's fiber transmitter is taken off the interface.
Key Features:
- Height: 1 in
- Depth: 4.7 in
- Width: 3.1 in
Key Features:
- Total Number of Ports: 1
- Number of Network (RJ-45) Ports: 1
- Weight (Approximate): 3.52 oz
Key Features:
- Item: Media Converter
- Maximum Operating Temperature: 140 Degrees F
- Overall Width: 1 in
Key Features:
- Item: Media Converter
- Switch Management: Unmanaged
- Network Interface: 10/100 Base-TX, 10/100 Base-TX to 100 Base-FX, 100 Base-FX
Key Features:
- Item: Media Converter
- Standards: IEEE 802.3, IEEE 802.3ab, IEEE 802.3u, IEEE 802.3z
- Overall Depth: 4 1/8 in
Key Features:
- EMS: EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-5, EN 61000-4-6, EN 61000-4-8, EN 61000-4-11
- Time: UPort 204: 1,577,573 hrs; UPort 207: 1,059,201 hrs
- Housing: Polycarbonate (PC)
Key Features:
- Ambient Relative Humidity: 5 to 95% (non-condensing)
- Time: 792,085 hrs
- EMC: CE, FCC
Key Features:
- Tx Output: Single-mode: > -5 dBm; Multi-mode: > -5 dBm
- Baudrate: 50 bps to 921.6 kbps
- Fiber Connector: SC or ST
Key Features:
- Standards: IEEE 802.3 for 10BaseT; IEEE 802.3u for 100BaseT(X), 100BaseFX
- EMI: CISPR 32, FCC Part 15B Class A
- Dimensions: 86.8 x 124.3 x 21 mm (3.42 x 4.89 x 0.83 in)
Key Features:
- 100Base-FX fiber port indicator: Green for port Link/Act. Amber for Duplex/Collision
- Redundant Input Power: Dual 12~48 VDC power input at 4-pin terminal block
- EMI: FCC Part 15, CISPR (EN55022) class A,
Key Features:
- Ethernet Standards: IEEE 802.3 for 10Base-T; IEEE 802.3u for 100Base-TX; IEEE 802.3ab for 1000Base-T; IEEE 802.3z for 1000Base-X
- 1000Base-X Port Indicator: Green for port Link/Act
- EMS: EN61000-4-2 (ESD), EN61000-4-3 (RS), ; EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, ; EN61000-4-11
Key Features:
- Standards: MIL-HDBK-217F
- IEC 61000-4-4 EFT: Power: 4 kV; Signal: 4 kV
- Magnetic Isolation Protection: 1.5 kV (built-in)
About Media Converters & Data Adapter Kits
Media Converters & Data Adapter Kits are used to convert data signals between different types of media, such as coaxial cables, twisted pair cables, and fiber optic cables. These kits allow for the transmission of data over long distances while maintaining the integrity of the signal.
Types of Media Converters & Data Adapter Kits
Media Converters & Data Adapter Kits come in a variety of forms and configurations depending on the type of media being converted. Different kits may have different components that support various protocols or have different power requirements. Some kits also provide additional features such as signal amplification or frequency conversion.
How Media Converters & Data Adapter Kits are Made
Media Converters & Data Adapter Kits are typically constructed with components like transceivers, connectors, power supplies, and circuit boards. They are designed to be compatible with multiple communication protocols and can often be customized for specific applications.
Industries that use Media Converters & Data Adapter Kits
Media Converters & Data Adapter Kits are commonly used in a variety of industries including telecommunications, aerospace engineering, automotive manufacturing, and medical device production. Professionals in these fields rely on these kits to enable efficient data transmission across long distances.
Find the Media Converters & Data Adapter Kits You Need at Zoro
Looking for a specific item? Use our robust search tool to find it by name or keyword, or use our handy filters to narrow down our full assortment. You can also check out our whole selection of electrical supplies, along with other tools or equipment to ensure you have all you need to tackle the job, especially if you're taking on a DIY project for the first time. Plus, when you shop at Zoro, you'll always enjoy competitive prices on tons of great brands you know and trust. We make the shopping experience as fast and seamless as possible with free shipping on orders over $50 for registered users, Net 30 payment terms for qualifying customers, and an unparalleled customer service experience.