2,000+ Results for Media Converters & Data Adapter Kits - Page 12
Key Features:
- Color: green
- Depth: 118.6 mm
- Height: 99 mm
Key Features:
- Network Technology: 10/100/1000Base-T
- Form Factor: Internal
- Total Number of Ports: 1
Key Features:
- Housing: ABS + PC
- EMI: FCC Part 15 Subpart B Class B
- EMS: EN 61000-4-2 (ESD) Level 2; EN 61000-4-3 (RS) Level 2; EN 61000-4-4 (EFT) Level 2; EN 61000-4-5 (Surge) Level 3; EN 61000-4-6 (CS) Level 2; EN 61000-4-8 (SFMF) Level 1
Key Features:
- Size: Maximum frame size of 2048 bytes
- Storage temperature: minimum range of -25 C to 70 C (-13 F to 158 F)
- Emissions: FCC Part 15 Class B*, EN55022 Class B*
Key Features:
- Product Name: CM-1000-M2SC05 Gigabit Ethernet Media Converter
- SC Port Type: Duplex
- Product Type: Transceiver/Media Converter
Key Features:
- Housing: Metal
- Optical Isolation: 2 kV (TCC-100I/100I-T)
- EMI: FCC Part 15 Subpart B Class B
Key Features:
- Size: Maximum frame size of 2048 bytes
- Power Consumption: 2.1 watts
- Link Pass Through: Enabled (Default)- When the state of the receiver is changed on the 100Base-TX interface it is reflected on the 100Base-FX fiber transmitter. When the state of the receiver on the 100Base-FX interface is changed it is reflected on the 100Base-TX transmitter; When a Far-End Fault Indication is received on the fiber interface the 100Base-TX transmitter is turned off. When the Far-End Fault Indication is cleared the transmitter is turned back on; Disabled- The 100Base-TX and the 100Base-FX fiber interface operate independently. Far-End Fault indication on the 100Base-FX fiber interface has no effect on the 100Base-TX interface.
Key Features:
- Bit Error Rate (BER): <10-12
- Link Pass Through: Enabled (Default)- When the state of the receiver is changed on the 100Base-TX interface it is reflected on the 100Base-FX fiber transmitter. When the state of the receiver on the 100Base-FX interface is changed it is reflected on the 100Base-TX transmitter; When a Far-End Fault Indication is received on the fiber interface the 100Base-TX transmitter is turned off. When the Far-End Fault Indication is cleared the transmitter is turned back on; Disabled- The 100Base-TX and the 100Base-FX fiber interface operate independently. Far-End Fault indication on the 100Base-FX fiber interface has no effect on the 100Base-TX interface.
- Electrical Safety: UL 60950-1
Key Features:
- Width: 4.5 in
- Height: 0.9 in
- Depth: 3.9 in
Key Features:
- Height: 1 in
- Depth: 4.7 in
- Size: Maximum frame size of 2048 bytes
Key Features:
- Storage temperature: minimum range of -25° C to 70° C (-13° F to 158° F)
- Card insertion and removal: Captive thumb screws enable fast insertion and removal. Can be further tighten with a screwdriver.
- Auto-Negotiation: Enabled (Default - Up)- In this mode the 1000Base-X and the 1000Base-T will negotiate to the HCD of the two link partners. The 1000Base-X will link up after the negotiation is completed and the 1000Base-T has linked up; Disabled- The 1000Base-X will not use auto negotiation. The 1000Base-T will negotiate to the HCD of the Switch settings and the link partner.
Key Features:
- Size: Maximum frame size of 2048 bytes
- Speed Copper: 100 (Default); 10
- Copper link on / Receive activity (LKC): This green LED is operational only when power is applied. The LED is on when the 100Base-TX link is on and flashes with a 50% duty cycle when data is received.
Key Features:
- Height: 1 in
- Width: 3.1 in
- Depth: 4.7 in
Key Features:
- Size: Maximum frame size of 10,240 bytes
- Buffer: 512 Kbits frame buffer memory
- Current: 0.09 A (@ 24VDC)
Key Features:
- Current: 0.29 amps
- Remote Loopback #2: The media converter can perform a loopback on the link #1 fiber interface; Disabled (Default - Up); Enabled - The 100Base-X receiver is looped to the 100Base-X transmitter. Link #1's fiber transmitter is taken off the interface.
- Power / TST: This green LED is turned on when power is applied to the media converter. Otherwise it is off. The LED will blink slowly when in Loopback test mode.
Key Features:
- Standards: MIL-HDBK-217F
- IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m
- Magnetic Isolation Protection: 1.5 kV (built-in)
Key Features:
- Depth: 4.7 in
- Size: Maximum frame size of 2048 bytes
- Width: 3.1 in
Key Features:
- Width: 5.1 in
- Standards: MIL-HDBK-217F
- Height: 2.1 in
Key Features:
- Color: green
- Depth: 4.1 in
- Width: 1.4 in
Key Features:
- Color: green
- Height: 3.9 in
- Depth: 4.1 in
Key Features:
- Operating Altitude: Up to 3,048 meters (10,000 feet)
- Power / TST: This green LED is turned on when power is applied to the media converter. Otherwise it is off. The LED will blink when in Loopback test mode.
- Universal AC/DC adapter: 100-240v AC, regulated DC adapter included
Key Features:
- Power Consumption: ICF-1150: 127 mA @ 12 V; ICF-1150I: 163 mA @ 12 V
- RS-232 Signals: TxD, RxD, GND
- Rx Sensitivity: ICF-1150-S (single-mode): -25 dBm; ICF-1150-M (multi-mode): -20 dBm
Key Features:
- Item: Media Converter
- Overall Width: 1 in
- Minimum Operating Temperature: 14 Degrees F
Key Features:
- Color: green
- Height: 99 mm
- Depth: 105 mm
Key Features:
- Color: green
- Height: 99 mm
- Width: 35 mm
Key Features:
- Color: green
- Depth: 105 mm
- Width: 35 mm
Key Features:
- Color: green
- Depth: 4.1 in
- Width: 1.4 in
Key Features:
- Color: green
- Height: 99 mm
- Width: 35 mm
Key Features:
- Color: green
- Depth: 105 mm
- Width: 35 mm
Key Features:
- Isolation: 2 kV RMS isolation per I/O port for 1 minute
- Point-to-Point Transmission: Half-duplex or full-duplex
- ESD Protection: 15 kV for all signals
About Media Converters & Data Adapter Kits
Media Converters & Data Adapter Kits are used to convert data signals between different types of media, such as coaxial cables, twisted pair cables, and fiber optic cables. These kits allow for the transmission of data over long distances while maintaining the integrity of the signal.
Types of Media Converters & Data Adapter Kits
Media Converters & Data Adapter Kits come in a variety of forms and configurations depending on the type of media being converted. Different kits may have different components that support various protocols or have different power requirements. Some kits also provide additional features such as signal amplification or frequency conversion.
How Media Converters & Data Adapter Kits are Made
Media Converters & Data Adapter Kits are typically constructed with components like transceivers, connectors, power supplies, and circuit boards. They are designed to be compatible with multiple communication protocols and can often be customized for specific applications.
Industries that use Media Converters & Data Adapter Kits
Media Converters & Data Adapter Kits are commonly used in a variety of industries including telecommunications, aerospace engineering, automotive manufacturing, and medical device production. Professionals in these fields rely on these kits to enable efficient data transmission across long distances.
Find the Media Converters & Data Adapter Kits You Need at Zoro
Looking for a specific item? Use our robust search tool to find it by name or keyword, or use our handy filters to narrow down our full assortment. You can also check out our whole selection of electrical supplies, along with other tools or equipment to ensure you have all you need to tackle the job, especially if you're taking on a DIY project for the first time. Plus, when you shop at Zoro, you'll always enjoy competitive prices on tons of great brands you know and trust. We make the shopping experience as fast and seamless as possible with free shipping on orders over $50 for registered users, Net 30 payment terms for qualifying customers, and an unparalleled customer service experience.