2,000+ Results for Media Converters & Data Adapter Kits - Page 14
Key Features:
- Size: Maximum frame size of 2048 bytes
- Power Connector: 5.5mm x 9.5mm x 2.1mm barrel socket
- Auto-Negotiation (802.3u): Enabled (Default)- The media converter uses 802.3u Auto-negotiation on the 100Base-TX interface. It is set to advertise full duplex; Disabled- The media converter sets the port according to the position of the speed and duplex switches.
Key Features:
- Height: 0.9 in
- Depth: 3.9 in
- Width: 4.5 in
Key Features:
- Size: Maximum frame size of 2048 bytes
- Depth: 3.9 in
- Height: 0.9 in
Key Features:
- Depth: 4.7 in
- Width: 3.1 in
- Height: 1 in
Key Features:
- Size: Maximum frame size of 2048 bytes
- Depth: 3.9 in
- Height: 0.9 in
Key Features:
- Size: Maximum frame size of 2048 bytes
- Power Consumption: 2.6 watts (@ 24VDC)
- Electrical Safety: UL 61010-1 and UL 61010-2-201 (including CB); UL/ULC/EN 62368-1 (including CB); CAN/CSA C22.2 No. 62368-1-14
Key Features:
- Size: Maximum frame size of 2048 bytes
- Width: 4.5 in
- Depth: 3.9 in
Key Features:
- Height: 1 in
- Depth: 4.7 in
- Width: 3.1 in
Key Features:
- Size: Maximum frame size of 10,240 bytes -- Gigabit Maximum frame size of 2048 bytes -- Fast Ethernet
- 100/1000: This multi-color LED is operational only when power is applied. The LED is green when the speed of the copper ethernet port is running at 1000 Mbps. The LED is yellow when the speed of the copper Ethernet port is running at 100 Mbps. The LED is off when in 10 Mbps.
- PSE Power: Settable for each UTP port available; When enabled (UP), the media converter will perform a Power Sourcing Equipment (PSE) function as per IEEE802.3bt standard; Default is "enabled"
Key Features:
- Depth: 4.7 in
- Height: 1 in
- Width: 3.1 in
Key Features:
- Depth: 4.7 in
- Height: 1 in
- Width: 3.1 in
Key Features:
- Size: Maximum frame size of 2048 bytes
- Power / TST: This green LED is turned on when power is applied to the media converter. Otherwise it is off. The LED will blink fast/slow when in Loopback test mode or hardware error.
- Electrical Safety: UL 61010-1 and UL 61010-2-201 (including CB); UL/ULC/EN 62368-1 (including CB); CAN/CSA C22.2 No. 62368-1-14
Key Features:
- Form Factor: Internal
- Network (RJ-45): Yes
- Maximum Distance Supported: 1804.46 ft
Key Features:
- Size: Maximum frame size of 2048 bytes
- Depth: 3.9 in
- Width: 4.5 in
Key Features:
- Weight (Approximate): 5.29 oz
- Network (RJ-45): Yes
- Network Technology: 1000Base-BX, 10/100/1000Base-T
Key Features:
- Size: Maximum frame size of 10,240 bytes -- Gigabit; Maximum frame size of 2048 bytes -- Fast Ethernet
- Number of Network (RJ-45) Ports: 1
- Fiber Optic Cable Standard: 50/125 µm, 62.5/125 µm
Key Features:
- Size: Maximum frame size of 2048 bytes
- Width: 4.5 in
- Height: 0.9 in
Key Features:
- Width: 4.5 in
- Size: Maximum frame size of 10,240 bytes
- Depth: 3.9 in
Key Features:
- Depth: 3.9 in
- Height: 0.9 in
- Width: 4.5 in
Key Features:
- Width: 3.1 in
- Depth: 4.7 in
- Height: 1 in
Key Features:
- Fiber Mode Supported: Multi-mode
- Certifications & Standards: Immunity: EN55024 Emissions: FCC Part 15 Class A, EN55022 Class A,CISPR 22 Class A,EN61000-3-2 Electrical Safety: UL 60950-1,EN60950,CE Laser Safety: EN 60825-1 2007,Fiber optic transmitters on this device meet Class 1 Laser safety requirements per IEC-60825 FDA/CDRH standards and comply with 21CFR1040.10 and 21CFR1040.11
- Ethernet Technology: Gigabit Ethernet
Key Features:
- Depth: 3.9 in
- Size: Maximum frame size of 10,240 bytes
- Height: 0.9 in
Key Features:
- Size: Maximum frame size of 2048 bytes
- Din Rail Kit: Native
- Magnetic Isolation: 1.5kv
Key Features:
- Storage temperature: minimum range of -25 C to 70 C (-13 F to 158 F)
- Fiber link 2 on / Receive activity (LK2): This green LED is operational only when power is applied. The LED is on when the 100Base-X link is on and flashes with a 50% duty cycle when data is received.
- Card insertion and removal: Captive thumb screws enable fast insertion and removal. Can be further tighten with a screwdriver.
Key Features:
- Total Number of Ports: 2
- Product Name: CM-100MM-M2SC2 Transceiver
- Environmentally Friendly: Yes
Key Features:
- Depth: 4.7 in
- Width: 3.1 in
- Height: 1 in
Key Features:
- Depth: 3.9 in
- Size: Maximum frame size of 10,240 bytes
- Height: 0.9 in
Key Features:
- Product Name: C-1000-M2LC05 Gigabit Ethernet Media Converter Module
- Environmentally Friendly: Yes
- Compatibility: MCR1900 Media Converter Chassis
Key Features:
- Size: Maximum frame size of 10,240 bytes
- Height: 0.9 in
- Depth: 3.9 in
Key Features:
- Depth: 4.7 in
- Width: 3.1 in
- Height: 1 in
Key Features:
- Size: Maximum frame size of 10,240 bytes
- Dimensions: 114 x 100 x 22.5mm, 4.5 x 3.9 x 0.88 inches
- Fiber Optic Cable: Multimode: 62.5 / 125, 50/125, 85/125, 100/140 micron; Single Mode: 9/125 micron (ITu-T 625)
Key Features:
- Bit Error Rate (BER): <10-12
- Laser Safety: EN 60825-1:2007
- Fiber Optic Cable: Multimode: 62.5 / 125, 50/125, 85/125, 100/140 micron; Single Mode: 9/125 micron (ITU-T 625)
Key Features:
- Depth: 4.7 in
- Width: 3.1 in
- Height: 1 in
Key Features:
- Network (RJ-45): Yes
- Ethernet Technology: Fast Ethernet
- Fiber Optic Wavelength: 1310 nm, 1550 nm
Key Features:
- Size: Maximum frame size of 2048 bytes
- Depth: 4.7 in
- Height: 1 in
Key Features:
- Size: Maximum frame size of 2048 bytes
- Emissions: FCC Part 15 Class B*, EN55022 Class B*
- Laser Safety: EN 60825-1:2007
About Media Converters & Data Adapter Kits
Media Converters & Data Adapter Kits are used to convert data signals between different types of media, such as coaxial cables, twisted pair cables, and fiber optic cables. These kits allow for the transmission of data over long distances while maintaining the integrity of the signal.
Types of Media Converters & Data Adapter Kits
Media Converters & Data Adapter Kits come in a variety of forms and configurations depending on the type of media being converted. Different kits may have different components that support various protocols or have different power requirements. Some kits also provide additional features such as signal amplification or frequency conversion.
How Media Converters & Data Adapter Kits are Made
Media Converters & Data Adapter Kits are typically constructed with components like transceivers, connectors, power supplies, and circuit boards. They are designed to be compatible with multiple communication protocols and can often be customized for specific applications.
Industries that use Media Converters & Data Adapter Kits
Media Converters & Data Adapter Kits are commonly used in a variety of industries including telecommunications, aerospace engineering, automotive manufacturing, and medical device production. Professionals in these fields rely on these kits to enable efficient data transmission across long distances.
Find the Media Converters & Data Adapter Kits You Need at Zoro
Looking for a specific item? Use our robust search tool to find it by name or keyword, or use our handy filters to narrow down our full assortment. You can also check out our whole selection of electrical supplies, along with other tools or equipment to ensure you have all you need to tackle the job, especially if you're taking on a DIY project for the first time. Plus, when you shop at Zoro, you'll always enjoy competitive prices on tons of great brands you know and trust. We make the shopping experience as fast and seamless as possible with free shipping on orders over $50 for registered users, Net 30 payment terms for qualifying customers, and an unparalleled customer service experience.