3,000+ Results for Enclosure Covers & Accessories - Page 21
Mfr # DK72S16
Key Features:
- Item: Enclosure Accessory
- Material: Steel
- Features: Easily installed on Type 12, 4 and 4X wall-mount enclosures using stainless steel bolts and sealing washers (included); Designed not to interfere with door clamps; Protects door from dripping water and settling dust; Constructed in 14 gauge mild steel (painted) or 316 stainless steel; Maintains enclosure rating.
Mfr # 18S48
Key Features:
- Item: Enclosure Accessory
- Material: Steel
- Bracket Assembly: Each kit consists of two or three brackets per assembly; Brackets combined with collar stud length provide 3" minimum clearance from the rear of the enclosure; "C" channel construction provides easy alignment of terminal straps.
Mfr # 18P1515
Key Features:
- Item: Enclosure Accessory
- Material: Steel
- Features: Steel panels are 12 gauge steel and are finished in white; Galvanized panels are 12 gauge unpainted galvanized steel; Stainless steel panels are 12 gauge and are brushed 316 SS; Aluminum panels are 5052-H32 aluminum alloy; Larger panels have two or four formed flanges; Some larger panels are 10 gauge; Panel mounting hardware not included (provided with enclosure).
Mfr # EP1224
Key Features:
- Item: Enclosure Accessory
- Material: Steel
- Additional Description: Eclipse Inner Panel - Fits Encl. 12 x 24 - Steel/Wht
Mfr # 72WFW
Key Features:
- Item: Accessories
- Features: Formed from 10 gauge or 12 gauge steel; All double door width panels are 10 gauge steel; Width panels are available in full or half height; Depth panels are available in full height only; Depth and width panels are provided with all mounting hardware and center support where required; Half panel can be mounted in the top or bottom half of the enclosure; Finished in white.
- Material: Steel
Mfr # 1481WSSDH1620
Key Features:
- Item: Hinged Window
- Material: Stainless Steel
- Size: 14.2 in x 16.2 in x 2.75 in (H x W x D)
Mfr # 1481WDH3624
Key Features:
- Item: Enclosure Accessory
- Material: Steel
- Features: Extra deep kits are designed to provide protection and easy access to components and equipment installed inside an enclosure; Frame is 14 gauge mild steel or 316L stainless steel; Maintain environmental protection level of enclosure. Painted mild steel maintain Type 4 and 12. Stainless Steel maintain Type 4, 4X and 12; Quarter turn latch for easy access; 2.5 inches of extra usable depth; Oil resistant neoprene gasket ensures a watertight seal; Hinges can be oriented in any direction; Window is 0.25" thick, UV Resistant Polycarbonate; Conveniently sized to allow mounting on the door of any Hammond Wallmount Series enclosure, or in any other Hammond enclosure with a suitable mounting surface; Mounting hardware and template are included; Finished in ANSI 61 gray recoatable powder or natural brushed stainless steel.
Mfr # 14B14
Key Features:
- Item: Enclosure Accessory
- Material: Steel
- Features: Used to provide convenient mounting for terminal blocks in 1414 Series enclosures and some sizes of "PJ" Series enclosures; Finished in white.
Mfr # 14B12
Key Features:
- Item: Enclosure Accessory
- Material: Steel
- Terminal Strap: 1.5" wide x 0.187" thick steel; Each strap includes spring locking hardware; Countersunk holes in straps provide extra terminal mounting space.
Mfr # PKT66
Key Features:
- Item: Enclosure Accessory
- Features: For use as additional or replacement literature and document pockets; Kit includes pocket, high strength two-sided adhesive tape and surface preparation swab; Plastic pocket is black; Packaged individually.
- Additional Description: 6 x 6 Print Pocket
Mfr # 1481L3R55SS
Key Features:
- Item: Enclosure Accessory
- Material: Stainless Steel
- UL File: E65324
Mfr # CWST224NK
Key Features:
- Item: Accessories
- Depth: 24
- Standards: UL-870 Type 1; cUL Type 1; Complies with IEC 60529, IP20; IEC 60529, IP20
Mfr # MHKD3
Key Features:
- Item: Enclosure Accessory
- Features: Durable zinc die-cast or stainless steel; Removable handle stop for clockwise / counter-clockwise operation; Textured powder coat Black finish on zinc cast handle; Maintains NEMA rating of the enclosure; Padlock "trigger" design for security requirements; Optional key lock or defeater available (key lock versions include 2 keys); The handle can be used on Hammond enclosures as field installation (1418, 1422, UHD, HN4, HWHK) or installed on these or other series at the factory
- Additional Description: 6" Padlocking w/ Defeater 3-pt Latch GT 60" - Zinc
Mfr # C3RHCLOMFK1
Key Features:
- Item: Mounting Kit
- Material: Steel
- Color: Gray
Mfr # 2CSD24X
Key Features:
- Item: Enclosure Accessory
- Material: Stainless Steel
- Features: Formed 14 gauge steel; Adds 6" to Data Terminal Depth; Maintains NEMA rating; Utilizes door from Data Terminal; Fastens flush to back of Data Terminal; Available in light gray and natural stainless steel.
Mfr # CN4ST5404
Key Features:
- Item: Splitter Trough
- Depth: 7
- Standards: CSA Certified Type 3R, 12, 4; Complies with IEC 60529, IP66; IEC 60529, IP66
Mfr # HP125SS
Key Features:
- Item: Enclosure Accessory
- Material: Stainless Steel
- Features: Designed to seal unused push Ābutton holes, conduit openings and knock Āout holes against dust, oil and water; Standard Pushbutton size is 30.5mm; Mini Pushbutton size is 22.5mm; Steel Hole Plug Available in 12 sizes. Finished in 2 color options - ANSI 61 gray or RAL7035 Light Gray Oil resistant gasket. Secured with an 10-24 x 0.55" threaded stud and plated wing nut. Recognized component UR & cUR Type 1, 3, 3R, 4, 12 and 13; Available in 12 sizes; Finished in 2 color options - ANSI 61 gray or RAL7035 Light Gray; Oil resistant gasket; Secured with an 10-24 x 0.55" threaded stud and plated wing nut; Recognized component UR & cUR Type 1, 3, 3R, 4, 12 and 13; Type 1, 3, 3R, 4, 12 and 13; Stainless Steel Hole Plugs Available in 8 sizes. Finished in brushed natural 304 stainless steel finish. Oil resistant gasket. Secured with an 10-24 x 0.55" threaded stud and plated wing nut. Recognized component UR & cUR Type 1, 3, 3R, 4, 4X, 12 and 13; Available in 8 sizes; Finished in brushed natural 304 stainless steel finish; Oil resistant gasket; Secured with an 10-24 x 0.55" threaded stud and plated wing nut; Recognized component UR & cUR Type 1, 3, 3R, 4, 4X, 12 and 13; Type 1, 3, 3R, 4, 4X, 12 and 13
Mfr # HP22SSN4
Key Features:
- Item: Enclosure Accessory
- Material: Stainless Steel
- Features: Designed to seal unused push Ābutton holes, conduit openings and knock Āout holes against dust, oil and water; Standard Pushbutton size is 30.5mm; Available in 8 sizes; Finished in brushed natural 304 stainless steel; Oil resistant gasket; Secured with an 10-24 x 0.55" threaded stud and stainless steel wing nut; Recognized component UR & cUR Type 1, 3, 3R, 4, 4X, 12 and 13; Type 1, 3, 3R, 4, 4X, 12 and 13
Mfr # BKFM7224
Key Features:
- Item: Enclosure Accessory
- Material: Steel
- Features: Barrier kits are designed to provide 2 vertical sections within 2 door, Type 4 enclosures; For use with HN4FM Series,1422N4 Series and 2STFSD Series; For application example, can provide separation between power and control sections within one cabinet; Does NOT provide complete physical separation as there is space above and below the barrier to run wiring; Depth mounted - bolted to the inner panel at rear and the center post at front; Certain sizes are depth adjustable; Panels are steel and painted white; Mounting hardware included.
Mfr # 90FD26
Key Features:
- Item: Accessories
- Material: Steel
- Features: Formed from 10 gauge or 12 gauge steel; All double door width panels are 10 gauge steel; Width panels are available in full or half height; Depth panels are available in full height only; Depth and width panels are provided with all mounting hardware and center support where required; Half panel can be mounted in the top or bottom half of the enclosure; Finished in white.
Mfr # 22P5656
Key Features:
- Item: Enclosure Accessory
- Material: Steel
- Features: 22P5038 is formed from 12 gauge steel, all others are 10 gauge steel; Panels and mounting hardware are included with 1422 and HN4FM Series enclosures; Finished in white.
Mfr # ESP2420
Key Features:
- Item: Enclosure Accessory
- Material: Steel
- Additional Description: Swing panel for 24 x 20 encl. - Steel/Wht
Mfr # BKFM6018
Key Features:
- Item: Enclosure Accessory
- Material: Steel
- Additional Description: BARRIER KIT N4 FM 60HX18D
Mfr # 1481SDH2416
Key Features:
- Item: Hinged Door Kit
- Material: Steel
- Size: 22.2 in x 12.2 in x 2.75 in (H x W x D)
Mfr # 18G2727
Key Features:
- Item: Enclosure Accessory
- Material: Steel
- Features: Steel panels are 12 gauge steel and are finished in white; Galvanized panels are 12 gauge unpainted galvanized steel; Stainless steel panels are 12 gauge and are brushed 316 SS; Aluminum panels are 5052-H32 aluminum alloy; Larger panels have two or four formed flanges; Some larger panels are 10 gauge; Panel mounting hardware not included (provided with enclosure).
Mfr # EPG3048
Key Features:
- Item: Enclosure Accessory
- Material: Steel
- Features: Larger than standard NEMA panel used in same sized enclosure; 12gauge steel construction; Larger sizes have 2 or 4 formed flanges for added strength; Slotted corner design for easier mounting; Finished in white or unpainted galvanized.
Mfr # 1495XK
Key Features:
- Item: Enclosure Accessory
- Material: Steel
- Features: Used for floor mounting for many types of enclosures, consolets or pushbutton boxes; Provides wiring feature through the column; Meets NEMA Type 12 and 13 requirements; Finished in ANSI 61 gray.
Mfr # DK42GY
Key Features:
- Item: Enclosure Accessory
- Material: Steel
- Features: Easily installed on Type 12, 4 and 4X wall-mount enclosures using stainless steel bolts and sealing washers (included); Designed not to interfere with door clamps; Protects door from dripping water and settling dust; Constructed in 14 gauge mild steel (painted) or 316 stainless steel; Maintains enclosure rating.
Mfr # 18P1709
Key Features:
- Item: Enclosure Accessory
- Material: Steel
- Additional Description: Panel 17 x 9 - Fits Encl. 20 x 12 - Steel/Wht
Mfr # 72WFWG
Key Features:
- Item: Accessories
- Features: Formed from 10 gauge or 12 gauge steel; All double door width panels are 10 gauge steel; Width panels are available in full or half height; Depth panels are available in full height only; Depth and width panels are provided with all mounting hardware and center support where required; Half panel can be mounted in the top or bottom half of the enclosure; Finished in white.
- Material: Galvanized Steel
Mfr # 1481WSSDH2430
Key Features:
- Item: Hinged Window
- Material: Stainless Steel
- Size: 22.2 in x 26.2 in x 2.75 in (H x W x D)
Mfr # EP3042
Key Features:
- Item: Enclosure Accessory
- Material: Steel
- Additional Description: Eclipse Inner Panel - Fits Encl. 30 x 42 - Steel/Wht
Mfr # N1JP1010
Key Features:
- Item: Enclosure Accessory
- Material: Steel
- Additional Description: N1J Series Panel - Fits Encl. 10 x 10 - Steel/Wht
Mfr # 2CSF24
Key Features:
- Item: Enclosure Accessory
- Material: Stainless Steel
- Features: Generally used in combination with plinth; Provides a raised foot support to relieve back stress; Gives the installation a "finished" appearance; Available in 24", 36", 48" and 60" widths; Maintains NEMA rating of system; Formed 14 gauge steel; Also offered with formed 14 gauge stainless steel; Rubber tread for added traction on footrest surface; Available in light gray and natural stainless steel.
Mfr # 2CLS
Key Features:
- Item: Enclosure Accessory
- Material: Steel
- Additional Description: Pedestal - 26" High - Steel/Lt Gray
About Enclosure Covers & Accessories
Properly conceal newly installed NEMA enclosures with all the electrical enclosure accessories you need from Zoro. Electrical enclosures can help protect your electrical work from dirt, debris, and spills. Whether youāre shopping for hole seals, louver plates, or other parts, we have all the finishing touches you need in a variety of styles and materials. Shop from the most trusted brands at everyday low prices. Find related products in our electrical enclosures category.