3,500+ Results for Enclosure Covers & Accessories - Page 17
Mfr # CN4ST4604
Key Features:
- Item: Splitter Trough
- Standards: CSA Certified Type 3R, 12, 4; Complies with IEC 60529, IP66; IEC 60529, IP66
- Width: 10
Mfr # 18S12
Key Features:
- Item: Enclosure Accessory
- Material: Steel
- Features: Used to provide convenient mounting for terminal blocks, pneumatic controls or small relays in 1418 wallmount enclosures; Brackets may be installed horizontally or vertically in an enclosure if the size corresponds to enclosure length or width; Finished in white.
Mfr # RH40000N4LG
Key Features:
- Item: Accessories
- Depth: 4
- Standards: UL / cUL Listed Type 4 or 4X (as noted) must be used in combination with PF Series Filterfan; must be used in combination with PF Series Filterfan
Mfr # AP1620
Key Features:
- Item: Enclosure Accessory
- Material: Steel
- Features: 14 gauge steel finished in white; Panels and mounting hardware are included with NIA Series enclosures.
Mfr # EPG2024
Key Features:
- Item: Enclosure Accessory
- Material: Steel
- Features: Larger than standard NEMA panel used in same sized enclosure; 12gauge steel construction; Larger sizes have 2 or 4 formed flanges for added strength; Slotted corner design for easier mounting; Finished in white or unpainted galvanized.
Mfr # CWCP8GNK
Key Features:
- Item: Accessories
- Material: Galvanized Steel
Mfr # RH20000N4S16
Key Features:
- Item: Accessories
- Depth: 4
- Standards: UL / cUL Listed Type 4 or 4X (as noted) must be used in combination with PF Series Filterfan; must be used in combination with PF Series Filterfan
Mfr # ESP3636
Key Features:
- Item: Enclosure Accessory
- Material: Steel
- Features: Hinged panel allows access to internally mounted equipment; Can be hinged from either side; 12 gauge steel construction; Slotted quarter turn latches provide closure; Adding optional locking quarter turn latches (Part Number EQTRL) convert this to a dead front panel; Complete with 4 depth adjustment brackets; Hardware kit maintains UL, CSA and NEMA ratings when field installed; Finished in white; (Note: Not compatible with DSTOPK door stop kit.)
Mfr # PMSTRAP40
Key Features:
- Item: Enclosure Accessory
- Material: Stainless Steel
- Features: Designed to mount outdoor rated enclosures - Hammond 1414N4, Eclipse, Eclipse Junior, HWHK, and 1418N4; Individual components allow users to choose the mounting configuration and/or components to purchase Note: Eclipse Series enclosures require the use of an external Eclipse Mounting Foot Kit (sold separately); Note: Eclipse Series enclosures require the use of an external Eclipse Mounting Foot Kit (sold separately); This pole mount kit is a 2 or 3-part system.
Mfr # EP3624
Key Features:
- Item: Enclosure Accessory
- Material: Steel
- Features: Larger than standard NEMA panel used in same sized enclosure; 12gauge steel construction; Larger sizes have 2 or 4 formed flanges for added strength; Slotted corner design for easier mounting; Finished in white or unpainted galvanized.
Mfr # 18B236
Key Features:
- Item: Enclosure Accessory
- Material: Steel
- Features: Used to provide convenient mounting for terminal blocks, pneumatic controls or small relays in 1418 wallmount enclosures; Brackets may be installed horizontally or vertically in an enclosure if the size corresponds to enclosure length or width; Finished in white.
Mfr # N1JP1210PP
Key Features:
- Item: Enclosure Accessory
- Material: Steel
- Features: For use with N1J series enclosures; Made from 16 ga steel; Accepts self tapping screws eliminating timely measurement, marking and drilling of component mounting holes; 1/8" dia holes on 1/4" staggered centers; ANSI 61 gray powder finish
Mfr # 60TYHW
Key Features:
- Item: Enclosure Accessory
- Material: Steel
- Features: Formed from 10 gauge or 12 gauge steel; All double door width panels are 10 gauge steel; Width panels are available in full or half height; Depth panels are available in full height only; Depth and width panels are provided with all mounting hardware and center support where required; Half panel can be mounted in the top or bottom half of the enclosure; Finished in white.
Mfr # N1JP1612PP
Key Features:
- Item: Enclosure Accessory
- Material: Steel
- Features: For use with N1J series enclosures; Made from 16 ga steel; Accepts self tapping screws eliminating timely measurement, marking and drilling of component mounting holes; 1/8" dia holes on 1/4" staggered centers; ANSI 61 gray powder finish
Mfr # CWCP12GNK
Key Features:
- Item: Accessories
- Material: Galvanized Steel
Mfr # 90YHWG
Key Features:
- Item: Accessories
- Features: Formed from 10 gauge or 12 gauge steel; All double door width panels are 10 gauge steel; Width panels are available in full or half height; Depth panels are available in full height only; Depth and width panels are provided with all mounting hardware and center support where required; Half panel can be mounted in the top or bottom half of the enclosure; Finished in white.
- Material: Galvanized Steel
Mfr # EPG2448
Key Features:
- Item: Enclosure Accessory
- Material: Steel
- Features: Larger than standard NEMA panel used in same sized enclosure; 12gauge steel construction; Larger sizes have 2 or 4 formed flanges for added strength; Slotted corner design for easier mounting; Finished in white or unpainted galvanized.
Mfr # 18G3933
Key Features:
- Item: Enclosure Accessory
- Material: Steel
- Features: Steel panels are 12 gauge steel and are finished in white; Galvanized panels are 12 gauge unpainted galvanized steel; Stainless steel panels are 12 gauge and are brushed 316 SS; Aluminum panels are 5052-H32 aluminum alloy; Larger panels have two or four formed flanges; Some larger panels are 10 gauge; Panel mounting hardware not included (provided with enclosure).
Mfr # 1481WDH2416
Key Features:
- Item: Enclosure Accessory
- Material: Steel
- UL File: E65324
Mfr # MHK1SS
Key Features:
- Item: Enclosure Accessory
- Features: Durable zinc die-cast or stainless steel; Removable handle stop for clockwise / counter-clockwise operation; Textured powder coat Black finish on zinc cast handle; Maintains NEMA rating of the enclosure; Padlock "trigger" design for security requirements; Optional key lock or defeater available (key lock versions include 2 keys); The handle can be used on Hammond enclosures as field installation (1418, 1422, UHD, HN4, HWHK) or installed on these or other series at the factory
Mfr # 1481SSDH1612
Key Features:
- Item: Hinged Door Kit
- Material: Stainless Steel
- Features: Extra deep kits are designed to provide protection and easy access to components and equipment installed inside an enclosure; Frame is 14 gauge mild steel or 316L stainless steel; Maintain environmental protection level of enclosure. Painted mild steel maintain Type 4 and 12. Stainless Steel maintain Type 4, 4X and 12; Quarter turn latch for easy access; 2.5 inches of extra usable depth; Oil resistant neoprene gasket ensures a watertight seal; Hinges can be oriented in any direction; Conveniently sized to allow mounting on any enclosure with a suitable mounting surface; Mounting hardware and template are included; Finished in ANSI 61 gray recoatable powder or natural brushed stainless steel.
Mfr # ESP3024
Key Features:
- Item: Enclosure Accessory
- Material: Steel
- Features: Hinged panel allows access to internally mounted equipment; Can be hinged from either side; 12 gauge steel construction; Slotted quarter turn latches provide closure; Adding optional locking quarter turn latches (Part Number EQTRL) convert this to a dead front panel; Complete with 4 depth adjustment brackets; Hardware kit maintains UL, CSA and NEMA ratings when field installed; Finished in white; (Note: Not compatible with DSTOPK door stop kit.)
Mfr # 249715BL
Key Features:
- Item: Panel Kit
Mfr # DK30LG
Key Features:
- Item: Enclosure Accessory
- Material: Steel
- Features: Easily installed on Type 12, 4 and 4X wall-mount enclosures using stainless steel bolts and sealing washers (included); Designed not to interfere with door clamps; Protects door from dripping water and settling dust; Constructed in 14 gauge mild steel (painted) or 316 stainless steel; Maintains enclosure rating.
Mfr # GP216GY
Key Features:
- Item: Enclosure Accessory
- Material: Steel
- Color: Gray
Mfr # CSG1010EXT4
Key Features:
- Item: Enclosure Accessory
- Material: Steel
- Features: Provides extra depth to Type 1 screw cover junction boxes - for use with CS, CSG, CSKO, CSKOG Series; Keyhole shaped mounting holes for quick assembly; Easy install - Remove box cover, fix extender ring using cover screws, and attach cover to extender ring with hardware provided; Painted steel (ANSI 61 gray) and unpainted galvanized versions available.
Mfr # 20P4022
Key Features:
- Item: Enclosure Accessory
- Features: Panels and mounting hardware are included with 1420 Series enclosures; 12 gauge steel finished in white.
- Material: Steel
Mfr # AP2420PP
Key Features:
- Item: Enclosure Accessory
- Material: Steel
- Features: For use with N1A series enclosures; Made from 16 ga steel; Accepts self tapping screws eliminating timely measurement, marking and drilling of component mounting holes; 1/8" dia holes on 1/4" staggered centers; ANSI 61 gray powder finish
Mfr # 18P1717PP
Key Features:
- Item: Enclosure Accessory
- Material: Steel
- Features: For use with 1418, 1447, PJW and PHW enclosures; Made from 16 ga steel; Accepts self tapping screws, eliminating time-consuming measurement, marking, and drilling of component mounting holes; 1/8" dia holes on 1/4" staggered centers; ANSI 61 gray powder finish
Mfr # EPG1224
Key Features:
- Item: Enclosure Accessory
- Material: Steel
- Features: Larger than standard NEMA panel used in same sized enclosure; 12gauge steel construction; Larger sizes have 2 or 4 formed flanges for added strength; Slotted corner design for easier mounting; Finished in white or unpainted galvanized.
Mfr # AP2020PP
Key Features:
- Item: Enclosure Accessory
- Material: Steel
- Features: For use with N1A series enclosures; Made from 16 ga steel; Accepts self tapping screws eliminating timely measurement, marking and drilling of component mounting holes; 1/8" dia holes on 1/4" staggered centers; ANSI 61 gray powder finish
Mfr # XF10230
Key Features:
- Item: Enclosure Accessory
- Features: 115 VAC or 230 VAC, 50/60 Hz; 12" lead wires; Exceptionally quiet operation; Versatile mounting and adaptability; Heavy-gauge steel construction; Attractive stainless steel grills; Shipped with air flow to pressurize. Can be user modified to exhaust; Aluminum filter is coated with adhesive baffle surfaces for dust and dirt collection. Can be recoated after cleaning for optimum performance; Drilling template included; Note: One grill and filter are included with each fan package. Normally, an additional exhaust grill and filter are required for each installation and must be ordered separately.
- Standards: UR/CUR/CE approved fan motors; CSA listed on fan only.
Mfr # 1495XK
Key Features:
- Item: Enclosure Accessory
- Material: Steel
- Features: Used for floor mounting for many types of enclosures, consolets or pushbutton boxes; Provides wiring feature through the column; Meets NEMA Type 12 and 13 requirements; Finished in ANSI 61 gray.
Mfr # 72WFWG
Key Features:
- Item: Accessories
- Features: Formed from 10 gauge or 12 gauge steel; All double door width panels are 10 gauge steel; Width panels are available in full or half height; Depth panels are available in full height only; Depth and width panels are provided with all mounting hardware and center support where required; Half panel can be mounted in the top or bottom half of the enclosure; Finished in white.
- Material: Galvanized Steel
Mfr # CWST248NK
Key Features:
- Item: Accessories
- Depth: 48
- Standards: UL-870 Type 1; cUL Type 1; Complies with IEC 60529, IP20; IEC 60529, IP20
Mfr # 18P1709
Key Features:
- Item: Enclosure Accessory
- Material: Steel
- Features: Steel panels are 12 gauge steel and are finished in white; Galvanized panels are 12 gauge unpainted galvanized steel; Stainless steel panels are 12 gauge and are brushed 316 SS; Aluminum panels are 5052-H32 aluminum alloy; Larger panels have two or four formed flanges; Some larger panels are 10 gauge; Panel mounting hardware not included (provided with enclosure).
About Enclosure Covers & Accessories
Properly conceal newly installed NEMA enclosures with all the electrical enclosure accessories you need from Zoro. Electrical enclosures can help protect your electrical work from dirt, debris, and spills. Whether you’re shopping for hole seals, louver plates, or other parts, we have all the finishing touches you need in a variety of styles and materials. Shop from the most trusted brands at everyday low prices. Find related products in our electrical enclosures category.