10 Results for Welding Hose by CONTINENTAL
Brand
CONTINENTAL
Mfr # 20027466
Key Features:
- Hose Length: 50 ft
- Hose Inside Dia.: 1/4 in
- Max. Working Pressure @ 70 F: 200 psi
Mfr # TWR-04-100BB
Key Features:
- Hose Length: 100 ft
- Hose Inside Dia.: 1/4 in
- Max. Working Pressure @ 70 F: 200 psi
Mfr # TWT-06-050BB
Key Features:
- Hose Length: 50 ft
- Hose Inside Dia.: 3/8 in
- Max. Working Pressure @ 70 F: 200 psi
Mfr # TWT-04-100BB
Key Features:
- Hose Length: 100 ft
- Hose Inside Dia.: 1/4 in
- Max. Working Pressure @ 70 F: 200 psi
Mfr # HZB02520-50-032
Key Features:
- Hose Length: 50 ft
- Hose Inside Dia.: 1/4 in
- Max. Working Pressure @ 70 F: 200 psi
Mfr # TWR-06-025BB
Key Features:
- Hose Length: 25 ft
- Hose Inside Dia.: 3/8 in
- Max. Working Pressure @ 70 F: 200 psi
Mfr # 20027183
Key Features:
- Hose Length: 25 ft
- Hose Inside Dia.: 1/4 in
- Max. Working Pressure @ 70 F: 200 psi
Mfr # 20027452
Key Features:
- Hose Length: 25 ft
- Hose Inside Dia.: 1/4 in
- Max. Working Pressure @ 70 F: 200 psi
Mfr # 21003706
Key Features:
- Hose Inside Dia.: 3/16 in
- Hose Length: 12 1/2 ft
- Max. Working Pressure @ 70 F: 200 psi
Mfr # 20027136
Key Features:
- Hose Length: 25 ft
- Hose Inside Dia.: 3/16 in
- Max. Working Pressure @ 70 F: 200 psi
About Welding Hose
The type of welding hose you use should be dependent on the type of welding gas you are using and the particular application. The welding hoses most suited to particular uses are reflected by the hose rating. Ratings and grades were determined jointly by the Industrial Gas Apparatus Committee of the Compressed Gas Association (CGA), and the Hose Technical Committee of the Rubber Manufacturers Association (RMA). The resultant RMA/CGA IP-7 standard classified hoses by grades and types based on application and, in some cases, type of gas used. Zoro carries welding hoses, hoses for plasma cutting systems, and leader welding leader hose that meets these standards. Products vary by hose length, inside diameter and other considerations.