5,500+ Results for Toolholder Accessories - Page 4
Key Features:
- Features: Left-hand assembly angle bracket
- Width: 78mm
- Primary Application: Multiple-joint hinges GN 7231 are installed on the inside of flaps, hatches and doors to save space and ensure protection against vandalism. The hinges have a maximum opening angle of 90°, making them perfect for use with thick door leaves.
Key Features:
- Thread Size: M8
- Features: Neoprene Rubber Protective Cap
- Length: 3.78 in
Key Features:
- Thread Size: M12
- Finish: Zinc plated, Black Oxide
- Length: 4.13 in
Key Features:
- Item: B ADJ ADAP 1MT 5/8 16 4 in
Key Features:
- Thread Size: 1/2 X 13"
- Primary Application: The solid rubber pad of leveling feet GN 33 is firmly embedded in the stainles steel base and secured by a screw loctited into place. The leveling feet can be screwed to the mounting surface using the mounting flange, which prevents lateral slippage.
- Material: Base - Stainless steel 304, Stud - Stainless steel 303
Key Features:
- Thickness: 15.5mm
- Primary Application: The adjustment screw in GN 437 hinges allows the movement of the hinge to be constrained and adds a friction adjustment which controls the swinging of doors and flaps to eliminate inadvertent movement.
- Features: 2x2 bores for countersunk screws
Key Features:
- Item: Collet Chuck
- Style: -
- For Use With: ER16 Collets
Key Features:
- Item: Swing Clamp Arm
- For Use With: 450 lbs. Swing Clamp Series
- Material of Construction: Steel
Key Features:
- Item: Shrink Fit Machine
- Voltage: 480 V
- Shrink Time: 5 sec
Key Features:
- Item: Shrink Fit Machine
- Machine Style: Induction Shrink Fitting
- Includes: Chuck Support
Key Features:
- Item: Lathe Jaw
- For Use With: 12 in Chucks
- Width: 12.00"
Key Features:
- Item: Shrink Fit Machine
- Overall Depth: 860.00 mm
- Watts: 13,000 W
Key Features:
- Item: Lathe Jaw
- For Use With: 6 in Quick Change Chucks
- Type: Straight Serration
Key Features:
- Item: Retention Knob
- Knob Dia.: 0.748"
- Flange to Angle Length: 0.9060 in
Key Features:
- Item: Tool Holder Tightening Fixture
- Shank: #40 Taper
- Height: 5.03"
Key Features:
- Item: Torx Driver Bit
Key Features:
- Knob Dia.: 22mm
- Primary Application: With serrated locking plates GN 187.4, components can be adjusted and locked form-fit at a defined angle. The angle position of the serration is adapted to the mounting holes, ensuring an parallel or right-angled arrangement. The tooth count of 48 / 60 enables the adjustment in 7.5° or 6° steps.
- Material: Stainless steel 316
Key Features:
- Knob Dia.: 40mm
- Color: Black
- Material: Steel
Key Features:
- Knob Dia.: 40mm
- Primary Application: With serrated locking plates GN 187.4, components can be adjusted and locked form-fit at a defined angle. The angle position of the serration is adapted to the mounting holes, ensuring an parallel or right-angled arrangement. The tooth count of 48 / 60 enables the adjustment in 7.5° or 6° steps.
- Thickness: 11.5mm
Key Features:
- Knob Dia.: 32mm
- Primary Application: With serrated locking plates GN 187.4, components can be adjusted and locked form-fit at a defined angle. The angle position of the serration is adapted to the mounting holes, ensuring an parallel or right-angled arrangement. The tooth count of 48 / 60 enables the adjustment in 7.5° or 6° steps.
- Thickness: 9mm
Key Features:
- Thread Size: 1/4 x 28"
- Length: 43mm
- Material: Steel, zinc-plated
Key Features:
- Item: Tapping Head
- For Use With: CAT50 Spindles
- Taper Size: CAT50
Key Features:
- Item: Tool Holder Tightening Fixture
- Style: Hex
- For Use With: Holding and Protecting Shank When Changing Collets
Key Features:
- Item: Lathe Jaw
- For Use With: 10 in Chucks
- Type: 60 Degrees
Key Features:
- Item: Retention Knob
- Knob Dia.: 0.740"
- Flange to Angle Length: 0.4330 in
Key Features:
- Item: Retention Knob
- Knob Dia.: 0.748"
- Flange to Angle Length: 0.7930 in
About Toolholder Accessories
Toolholder Accessories are used in many industries and jobs for a variety of purposes. They can be used to hold, secure, and position tools for a variety of applications. Toolholder Accessories come in a wide range of styles and materials.
Types of Toolholder Accessories
Toolholder Accessories can include Retention Knobs, Collets, Chucks, Nuts, Clamping Kits, and many other types. Each type has its own purpose and is designed to fit the specific needs of the job or industry.
Materials Used for Toolholder Accessories
Toolholder accessories are usually made from steel or aluminum alloys. The material is chosen based on the application they will be used for. For example, Retention Knobs are often made from stainless steel due to its corrosion resistance.
Industries that use Toolholder Accessories
Toolholder accessories are commonly used in manufacturing industries such as automotive and aerospace. They are also widely used by professionals such as machinists who rely on them to securely hold tools while working on projects. Clamping Kits are often used to provide extra stability when working with heavy parts or components.
Find the Toolholder Accessories You Need at Zoro
Looking for a specific item? Use our robust search tool to find it by name or keyword, or use our handy filters to narrow down our full assortment. You can also check out our whole selection of tools & machining along with other tools or supplies to ensure you have all you need to tackle the job, especially if you're taking on a DIY project for the first time. Plus, when you shop at Zoro, you'll always enjoy competitive prices on tons of great brands you know and trust. We make the shopping experience as fast and seamless as possible with free shipping on orders over $50 for registered users, Net 30 payment terms for qualifying customers, and an unparalleled customer service experience.