5,500+ Results for Toolholder Accessories - Page 15
Key Features:
- Thread Size: M20
- Features: With nut, wrench flat at the bottom
- Material: Base - Stainless steel 304, Stud - Stainless steel 303
Key Features:
- Knob Dia.: 23mm
- Thread Size: M5 x 0.8"
- Finish: Black, shiny finish
Key Features:
- Thread Size: M12"
- Primary Application: The static load capacity of leveling feet GN 343.6 results from the permissible load capacity of the threaded stud (AISI 303). Under normal operating conditions, bending loads or angular loads are not uncommon and result in a reduction of the load capacity, which must be taken into consideration.
- Includes: Elastomer rubber cap
Key Features:
- Thread Size: 1/2 X 13"
- Primary Application: The solid rubber pad of leveling feet GN 33 is firmly embedded in the stainles steel base and secured by a screw loctited into place. The leveling feet can be screwed to the mounting surface using the mounting flange, which prevents lateral slippage.
- Features: Without nut, external hex at the bottom
Key Features:
- Knob Dia.: 54mm
- Thread Size: G 1-1/4
- Color: Transparent
Key Features:
- Knob Dia.: 28mm
- Angle: 16°
- Width: 19mm
Key Features:
- Thread Size: 1/4 x 28"
- Material: Steel, zinc-plated
- Primary Application: Clevis fork heads WN 71752 are mainly used with pneumatic or hydraulic cylinders.
Key Features:
- Thread Size: 1/2 X 13"
- Features: Without nut, external hex at the bottom
- Material: Base - Stainless steel 304, Stud - Stainless steel 303
Key Features:
- Thread Size: 3/8 X 16"
- Material: Base - Stainless steel 304, Stud - Stainless steel 303
- Features: External hex, tapped socket type
Key Features:
- Length: 100 mm
- Includes: Revolving Handle, Black Plastic Handle Shiny Finish - Threaded Spindle Stainless Steel AISI 304
- Material: Stainless Steel Precision Casting AISI CF-8, Contact Face of Hub Machined
Key Features:
- Thread Size: 1/2 X 13"
- Features: Without nut, external hex at the bottom
- Primary Application: The solid rubber pad of leveling feet GN 33 is firmly embedded in the stainles steel base and secured by a screw loctited into place. The leveling feet can be screwed to the mounting surface using the mounting flange, which prevents lateral slippage.
Key Features:
- Thread Size: 5/8 x 18"
- Includes: Pin with snap-on securing collar
- Width: 32mm
Key Features:
- Thread Size: 1/4 x 28"
- Primary Application: Clevis fork joints WN 751 are mainly used with pneumatic or hydraulic cylinders. They consist of a clevis fork head and a pin with snap-on securing collar.
- Width: 13mm
Key Features:
- Knob Dia.: 32mm
- Color: Black
- Finish: Black steam oxidized
Key Features:
- Thread Size: M24
- Features: With nut, internal hex at the top, wrench flat at the bottom
- Finish: Matte shot-blasted finish
Key Features:
- Thread Size: M20
- Primary Application: The static load capacity of leveling feet GN 343.6 results from the permissible load capacity of the threaded stud (AISI 303). Under normal operating conditions, bending loads or angular loads are not uncommon and result in a reduction of the load capacity, which must be taken into consideration.
- Material: Stainless steel 303
Key Features:
- Thread Size: 5/16 x 24L"
- Primary Application: Clevis fork joints WN 751 are mainly used with pneumatic or hydraulic cylinders. They consist of a clevis fork head and a pin with a circlip.
- Finish: Plain finish
Key Features:
- Material: Nylon Plastic - Glass Fiber Reinforced w/Steel Zinc Plated Hub
- Color: Black
- Primary Application: Crank handles MV-M are of modern design and are suitable for light duty applications.
Key Features:
- Thread Size: 5/16 x 24L"
- Finish: Blue passivated finish
- Width: 16mm
Key Features:
- Material: Stainless Steel 304
- Primary Application: Latch type toggle clamps GN 852 are used for very high holding forces, as may be required in plastic high pressure mold forming.
- Width: 64mm
Key Features:
- Primary Application: Multiple-joint hinges GN 7233 are installed on the inside of flaps, hatches and doors to save space and ensure protection against vandalism. The hinges have a maximum opening angle of 120°, allowing for easy accessibility and making them suitable for use with medium-thick door leaves.
- Width: 105mm
- Length: 135mm
Key Features:
- Thread Size: 1/2 X 13"
- Primary Application: The solid rubber pad of leveling feet GN 33 is firmly embedded in the stainles steel base and secured by a screw loctited into place. The leveling feet can be screwed to the mounting surface using the mounting flange, which prevents lateral slippage.
- Finish: Matte shot-blasted finish
Key Features:
- Knob Dia.: 21mm
- Thread Size: M5 x 0.8"
- Finish: Black, shiny finish
Key Features:
- Thread Size: M5
- Length: 1.77 in
- Hex Nut Length: 0.11 in
Key Features:
- Thread Size: 5/8 X 11"
- Finish: Matte shot-blasted finish
- Material: Base - Stainless steel 304, Stud - Stainless steel 303
Key Features:
- Thread Size: M16
- Material: Stainless steel 303
- Includes: Technopolymer plastic cap
Key Features:
- Thread Size: M6
- Length: 1.02 in
- Finish: Matte
Key Features:
- Knob Dia.: 34mm
- Thread Size: M6
- Color: Black
About Toolholder Accessories
Toolholder Accessories are used in many industries and jobs for a variety of purposes. They can be used to hold, secure, and position tools for a variety of applications. Toolholder Accessories come in a wide range of styles and materials.
Types of Toolholder Accessories
Toolholder Accessories can include Retention Knobs, Collets, Chucks, Nuts, Clamping Kits, and many other types. Each type has its own purpose and is designed to fit the specific needs of the job or industry.
Materials Used for Toolholder Accessories
Toolholder accessories are usually made from steel or aluminum alloys. The material is chosen based on the application they will be used for. For example, Retention Knobs are often made from stainless steel due to its corrosion resistance.
Industries that use Toolholder Accessories
Toolholder accessories are commonly used in manufacturing industries such as automotive and aerospace. They are also widely used by professionals such as machinists who rely on them to securely hold tools while working on projects. Clamping Kits are often used to provide extra stability when working with heavy parts or components.
Find the Toolholder Accessories You Need at Zoro
Looking for a specific item? Use our robust search tool to find it by name or keyword, or use our handy filters to narrow down our full assortment. You can also check out our whole selection of tools & machining along with other tools or supplies to ensure you have all you need to tackle the job, especially if you're taking on a DIY project for the first time. Plus, when you shop at Zoro, you'll always enjoy competitive prices on tons of great brands you know and trust. We make the shopping experience as fast and seamless as possible with free shipping on orders over $50 for registered users, Net 30 payment terms for qualifying customers, and an unparalleled customer service experience.