523 Results for Toolholder Accessories by J.W. WINCO
Key Features:
- Width: 101mm
- Material: Stainless steel 304
- Features: Right-hand assembly angle bracket
Key Features:
- Thread Size: 1/2X13"
- Material: Steel, zinc plated
- Shank Dia.: 7.9mm
Key Features:
- Knob Dia.: 28mm
- Thread Size: G 1/2
- Color: Transparent
Key Features:
- Thread Size: 1/4 x 28"
- Primary Application: Clevis fork joints WN 751 are mainly used with pneumatic or hydraulic cylinders. They consist of a clevis fork head and a pin with snap-on securing collar.
- Includes: Pin with snap-on securing collar
Key Features:
- Width: 126mm
- Material: Stainless steel 304
- Finish: Matte, tumbled finish
Key Features:
- Thread Size: M8
- Length: 2.68 in
- Spindle Tip Type: Flat
Key Features:
- Width: 126mm
- Features: Right-hand assembly angle bracket
- Primary Application: Multiple-joint hinges GN 7231 are installed on the inside of flaps, hatches and doors to save space and ensure protection against vandalism. The hinges have a maximum opening angle of 90°, making them perfect for use with thick door leaves.
Key Features:
- Knob Dia.: 47mm
- Thread Size: M6
- Material: Body - Nylon plastic, Stud - Steel, zinc plated
Key Features:
- Thread Size: M4
- Length: 2.20 in
- Finish: Zinc plated
Key Features:
- Knob Dia.: 40mm
- Thickness: 11.5mm
- Primary Application: With serrated locking plates GN 187.4, components can be adjusted and locked form-fit at a defined angle. The angle position of the serration is adapted to the mounting holes, ensuring an parallel or right-angled arrangement. The tooth count of 48 / 60 enables the adjustment in 7.5° or 6° steps.
Key Features:
- Thread Size: M10
- Length: 3.03 in
- Hex Nut Length: 0.2 in
Key Features:
- Thread Size: M8
- Length: 2.28 in
- Finish: Black oxide
Key Features:
- Thread Size: M4
- Width: 0.83 in
- Finish: Zinc plated
Key Features:
- Features: Left-hand assembly angle bracket
- Length: 126mm
- Finish: Matte, tumbled finish
Key Features:
- Features: Right-hand assembly angle bracket
- Primary Application: Multiple-joint hinges GN 7231 are installed on the inside of flaps, hatches and doors to save space and ensure protection against vandalism. The hinges have a maximum opening angle of 90°, making them perfect for use with thick door leaves.
- Finish: Matte, tumbled finish
Key Features:
- Thread Size: 1/2 X 13"
- Primary Application: The solid rubber pad of leveling feet GN 33 is firmly embedded in the stainles steel base and secured by a screw loctited into place. The leveling feet can be screwed to the mounting surface using the mounting flange, which prevents lateral slippage.
- Material: Base - Stainless steel 304, Stud - Stainless steel 303
Key Features:
- Knob Dia.: 29mm
- Thread Size: M8 x 1.25"
- Length: 112 mm
Key Features:
- Knob Dia.: 32mm
- Primary Application: With serrated locking plates GN 187.4, components can be adjusted and locked form-fit at a defined angle. The angle position of the serration is adapted to the mounting holes, ensuring an parallel or right-angled arrangement. The tooth count of 48 / 60 enables the adjustment in 7.5° or 6° steps.
- Thickness: 9mm
Key Features:
- Thread Size: M8
- Features: Neoprene Rubber Protective Cap
- Length: 3.78 in
Key Features:
- Thickness: 15.5mm
- Primary Application: The adjustment screw in GN 437 hinges allows the movement of the hinge to be constrained and adds a friction adjustment which controls the swinging of doors and flaps to eliminate inadvertent movement.
- Features: 2x2 bores for countersunk screws
Key Features:
- Features: Left-hand assembly angle bracket
- Width: 78mm
- Primary Application: Multiple-joint hinges GN 7231 are installed on the inside of flaps, hatches and doors to save space and ensure protection against vandalism. The hinges have a maximum opening angle of 90°, making them perfect for use with thick door leaves.
Key Features:
- Thread Size: 1/4 x 28"
- Length: 43mm
- Material: Steel, zinc-plated
Key Features:
- Knob Dia.: 40mm
- Primary Application: With serrated locking plates GN 187.4, components can be adjusted and locked form-fit at a defined angle. The angle position of the serration is adapted to the mounting holes, ensuring an parallel or right-angled arrangement. The tooth count of 48 / 60 enables the adjustment in 7.5° or 6° steps.
- Thickness: 11.5mm
Key Features:
- Thread Size: M12
- Finish: Zinc plated, Black Oxide
- Length: 4.13 in
Key Features:
- Knob Dia.: 22mm
- Primary Application: With serrated locking plates GN 187.4, components can be adjusted and locked form-fit at a defined angle. The angle position of the serration is adapted to the mounting holes, ensuring an parallel or right-angled arrangement. The tooth count of 48 / 60 enables the adjustment in 7.5° or 6° steps.
- Material: Stainless steel 316
About Toolholder Accessories
Toolholder Accessories are used in many industries and jobs for a variety of purposes. They can be used to hold, secure, and position tools for a variety of applications. Toolholder Accessories come in a wide range of styles and materials.
Types of Toolholder Accessories
Toolholder Accessories can include Retention Knobs, Collets, Chucks, Nuts, Clamping Kits, and many other types. Each type has its own purpose and is designed to fit the specific needs of the job or industry.
Materials Used for Toolholder Accessories
Toolholder accessories are usually made from steel or aluminum alloys. The material is chosen based on the application they will be used for. For example, Retention Knobs are often made from stainless steel due to its corrosion resistance.
Industries that use Toolholder Accessories
Toolholder accessories are commonly used in manufacturing industries such as automotive and aerospace. They are also widely used by professionals such as machinists who rely on them to securely hold tools while working on projects. Clamping Kits are often used to provide extra stability when working with heavy parts or components.
Find the Toolholder Accessories You Need at Zoro
Looking for a specific item? Use our robust search tool to find it by name or keyword, or use our handy filters to narrow down our full assortment. You can also check out our whole selection of tools & machining along with other tools or supplies to ensure you have all you need to tackle the job, especially if you're taking on a DIY project for the first time. Plus, when you shop at Zoro, you'll always enjoy competitive prices on tons of great brands you know and trust. We make the shopping experience as fast and seamless as possible with free shipping on orders over $50 for registered users, Net 30 payment terms for qualifying customers, and an unparalleled customer service experience.