Full Load Amps-Inductive
|
80 A
|
Item
|
IEC Magnetic Contactor
|
Number of Poles
|
4
|
Coil Volts
|
120 V AC
|
Aux. Contact Configuration
|
2NO/2NC
|
Standards
|
EN 60947-4-1, EN 60947-5-1, IEC 60947-4-1, IEC 60947-5-1, UL 60947-4-1, UL 60947-5-1, CSA C22.2 No 60947-4-1, CSA C22.2 No 60947-5-1, GB/T 14048.4, UL, CSA, CCC, EAC, UKCA, CB, EU-RO-MR by DNV-GL, THIEC 60068-2-30
|
Series
|
LC1D
|
Application
|
Resistive Load
|
Features
|
Without Built-In Suppressor Module
|
Mounts On
|
Plate, Rail
|
Includes Protective Cover
|
No
|
Environmental Attributes
|
Mercury Free, PVC Free, Toxic Heavy Metal Free, Pollution Degree 3
|
Net Weight
|
1.84 kg
|
IP Rating
|
IP20
|
Control Circuit Voltage Limits
|
Operational AC: 0.85 to 1.1 Uc (at -40 to 55°C 60 Hz), 0.8 to 1.1 Uc (at -40 to 55°C 50 Hz); Drop-Out AC: 0.3 to 0.6 Uc (at -40 to 55°C 50/60 Hz)
|
Inrush VA
|
245 VA
|
Impedance
|
0.8 mOhm
|
Vibration Resistance
|
3 G (Contactor Closed), 2 G (Contactor Open)
|
Hold VA
|
26 VA
|
Operating Speed
|
3600 cycles per hr
|
Fuse Amps
|
200 A (Type 1 Power Circuit), 160 A (Type 2 Power Circuit)
|
Electrical Connection
|
Screw Clamp Terminals
|
Rated Voltage
|
690V AC
|
Max. Temperature
|
850°C
|
Tightening Torque
|
1.2 Nm (Control Circuit), 12 Nm (Power Circuit)
|
Fire Rating
|
UL 94 V1
|
Operating Time
|
20 to 35 ms (Closing), 6 to 20 ms (Opening)
|
Mechanical Durability
|
4 Mcycles
|
Shock Resistance
|
10 G for 11 ms (Contactor Closed), 8 G for 11 ms (Contactor Open)
|
Thermal Amperage
|
125 A (at 60°C Power Circuit)
|
Overvoltage Category
|
CAT III
|
Rated Making Capacity
|
1100 A @ 440V (Power Circuit)
|
Rated Breaking Capacity
|
1100 A @ 440V
|
Impulse Withstand Voltage
|
8 kV
|
Electrical Durability
|
0.8 Mcycles (125 A, AC-1, Less than 440 V)
|
Rated Short-Time Withstand Current
|
640 A (at 40°C for 10 s Power Circuit), 990 A (at 40°C for 1 s Power Circuit), 135 A (at 40°C for 10 min Power Circuit), 320 A (at 40°C for 1 min Power Circuit)
|
Rated Insulation Volts
|
600/1000V
|
Watts Loss
|
6 to 10W
|
Rated Insulation Voltage
|
Power circuit 600 V CSA; Power circuit 600 V UL; Power circuit 1000 V IEC 60947-4-1
|
Operating Altitude
|
0 to 9842.52 ft (0 to 3000 m)
|
Control Circuit Voltage
|
120 V AC 50/60 Hz
|
Utilisation Category
|
AC-1
|
Fire Resistance
|
1562°F (850°C) IEC 60695-2-1
|
Power Dissipation Per Pole
|
12.5 W AC-1
|
Product Certifications
|
UL; CSA; CCC; EAC; UKCA; CB; EU-RO-MR by DNV-GL
|
Permissible Ambient Air Temperature Around The Device
|
-40 to 140°F (-40 to 60°C); 140 to 158°F (60 to 70°C) with derating
|
Flame Retardance
|
V1 conforming to UL 94
|
Climatic Withstand
|
IACS E10 exposure to damp heat
|
IRMS Rated Making Capacity
|
1100 A at 440 V for power circuit conforming to IEC 60947
|
Conventional Free Air Thermal Current
|
125 A (at 140°F (60°C)) for power circuit
|
Protective Treatment
|
THIEC 60068-2-30
|
Poles Description
|
4P
|
Rated Operational Current
|
125 A (at Less than 140°F (60°C)) at Less than or Equal to 440 V AC AC-1 for power circuit
|
Mounting Support
|
Rail; Plate
|
Inrush Power in VA
|
245 VA 60 Hz cos phi 0.75 (at 68°F (20°C)); 245 VA 50 Hz cos phi 0.75 (at 68°F (20°C))
|
Product Or Component Type
|
Contactor
|
Contact Compatibility
|
M1
|
Pole Contact Composition
|
2 NO + 2 NC
|
IP Degree Of Protection
|
IP20 front face IEC 60529
|
Associated Fuse Rating
|
200 A gG at Less than or Equal to 690 V coordination type 1 for power circuit; 160 A gG at Less than or Equal to 690 V coordination type 2 for power circuit
|
Rated Operational Voltage
|
Power circuit Less than or Equal to 690 V AC 25 to 400 Hz
|
Control Circuit Type
|
AC 50/60 Hz
|
Safety Reliability Level
|
B10d = 1369863 cycles contactor with nominal load EN/ISO 13849-1; B10d = 20000000 cycles contactor with mechanical load EN/ISO 13849-1
|
Rated Impulse Withstand Voltage
|
8 kV IEC 60947
|
Rated Short Time Withstand Current
|
640 A 104°F (40°C) - 10 s for power circuit; 990 A 104°F (40°C) - 1 s for power circuit; 135 A 104°F (40°C) - 10 min for power circuit; 320 A 104°F (40°C) - 1 min for power circuit
|
Maximum Operating Rate
|
3600 cyc/h 140°F (60°C)
|
Hold-In Power Consumption in VA
|
26 VA 60 Hz cos phi 0.3 (at 68°F (20°C)); 26 VA 50 Hz cos phi 0.3 (at 68°F (20°C))
|
Average Impedance
|
0.8 mOhm - Ith 125 A 50 Hz for power circuit
|
Mechanical Robustness
|
Vibrations contactor open 2 Gn, 5 to 300 Hz); Shocks contactor open 8 Gn for 11 ms); Vibrations contactor closed 3 Gn, 5 to 300 Hz); Shocks contactor closed 10 Gn for 11 ms)
|
Connections - Terminals
|
Control circuit: screw clamp terminals 2 0.00 to 0.00 in² (1 to 2.5 mm²) - cable stiffness: flexible with cable end; Control circuit: screw clamp terminals 1 0.00 to 0.00 in² (1 to 2.5 mm²) - cable stiffness: flexible with cable end; Control circuit: screw clamp terminals 1 0.00 to 0.01 in² (1 to 4 mm²) - cable stiffness: flexible without cable end; Control circuit: screw clamp terminals 2 0.00 to 0.01 in² (1 to 4 mm²) - cable stiffness: flexible without cable end; Control circuit: screw clamp terminals 1 0.00 to 0.01 in² (1 to 4 mm²) - cable stiffness: solid without cable end; Control circuit: screw clamp terminals 2 0.00 to 0.01 in² (1 to 4 mm²) - cable stiffness: solid without cable end; Power circuit: connector 1 0.01 to 0.08 in² (4 to 50 mm²) - cable stiffness: flexible without cable end; Power circuit: connector 2 0.01 to 0.04 in² (4 to 25 mm²) - cable stiffness: flexible without cable end; Power circuit: connector 1 0.01 to 0.08 in² (4 to 50 mm²) - cable stiffness: flexible with cable end; Power circuit: connector 2 0.01 to 0.02 in² (4 to 16 mm²) - cable stiffness: flexible with cable end; Power circuit: connector 1 0.01 to 0.08 in² (4 to 50 mm²) - cable stiffness: solid without cable end; Power circuit: connector 2 0.01 to 0.04 in² (4 to 25 mm²) - cable stiffness: solid without cable end
|
Pollution Degree
|
3
|
Protective Cover
|
Without
|
Heat Dissipation
|
6 to 10 W at 50/60 Hz
|
[Ue] Rated Operational Voltage
|
power circuit <= 690 V AC 25...400 Hz
|
Pvc Free
|
Yes
|
[Ith] Conventional Free Air Thermal Current
|
125 A (at 60°C) for power circuit
|
[Ie] Rated Operational Current
|
125 A (at <60°C) at <= 440 V AC AC-1 for power circuit
|
Range of Product
|
TeSys Deca
|
Range
|
TeSys
|
[Ui] Rated Insulation Voltage
|
power circuit 600 V CSA, power circuit 600 V UL, power circuit 1000 V IEC 60947-4-1
|
[Icw] Rated Short-Time Withstand Current
|
640 A 40°C - 10 s for power circuit, 990 A 40°C - 1 s for power circuit, 135 A 40°C - 10 min for power circuit, 320 A 40°C - 1 min for power circuit
|