6,000+ Results for Safety Tags & Identification - Page 23
Mfr # 131554
Key Features:
- Item: Tag
- Includes: 25 Tags
- Material: Plastic
Mfr # USP20092
Key Features:
- Item: Safety Tag
- Header: Alpet E2 Sanitizing Foam Soap
- Legend: Keep Away From Heat/Sparks/Open Flames/Hot Surfaces-No Smoking. Do Not Use In Eyes. Keep Container Tightly Closed. Ground/Bond Container and Receiving Equipment. Use Explosion-Proof Electrical/Ventilating/Lighting/Equipment. Use Only Non-Sparking Tools. Take Precautionary Measure Against Static Discharge. When Handling Large Quantities, Wear Protective Glove/Protective Clothing/Eye Protection/Face Protection. Read SDS for Further Information On Hazards and Instructions. First AID: Eye Contact: Hold Eye(s) Open Rinse Slowly and Gently with Water for 15 to 20 min Remove Contact Lenses, If Eye Irritation Persists: Get Medical Advice/Attention. Skin Contact (Large Quantities): Wash Off Immediately with Soap and Plenty of Water While Removing All Contaminated Clothes and Shoes. Wash Contaminated Clothing and Shoes Before Reuse. Get Medical Attention If Irritation Develops and Persists. Inhalation: Remove to Fresh Air. Immediate Medical Attention is Not Required. Ingestion: Do Not Induce Vomiting. Drink Plenty of Water. Never Give Anything By Mouth to An Unconscious Person, Call A Physician Immediately
Mfr # TDF808VPE
Key Features:
- Legend: T-8
- Header: No Header
- Item: Energy Source ID Tag
Mfr # TM34K
Key Features:
- Item: Stop Sign
Mfr # TAR148
Key Features:
- Item: Danger Out Of Order Ez Pull Tag
- Legend: Danger Out Of Order
- Material: Polyolefin
Mfr # LR303
Key Features:
- Item: Rfid Tag, Danger Equipment Locked Out, 6
Mfr # B30-255-851-OSHADA
Key Features:
- Item: Printable Lockout Tags
- Standards: OSHA, RoHS Compliant
- Indoor/Outdoor Usage: Outdoor
Mfr # KAT160AC
Key Features:
- Item: Do Not Operate This Equipment Tag ,PK10
Mfr # FT105
Key Features:
- Material: 0.055" high density plastic
- Item: Fuel Tags
- Legend: MID GRADE
Mfr # TDF402XVE
Key Features:
- Legend: G-2
- Item: Energy Source ID Tag
- Header: No Header
Mfr # FT112
Key Features:
- Material: 0.055" high density plastic
- Legend: ETHANOL MID GRADE
- Length: 2.56"
Mfr # DL178BTB
Key Features:
- Item: Four Digit 2734 Placard
- Legend: 1903 3
- Material: Card Stock
Mfr # RPT31
Key Features:
- Item: Label,Danger Men Working On Mach,PK25
Mfr # DL400TB100
Key Features:
- Item: Four Digit 1993 Placard,PK100
Mfr # GD139AP
Key Features:
- Item: Danger High Voltage Keep Out Label,PK5
Mfr # DL85BTB
Key Features:
- Item: Placard Sign,Hot 3257 Misc Dot
- Legend: HOT - 3257
- Material: Tag Board, Card Stock Vinyl
Mfr # DL47TB
Key Features:
- Item: Dangerous When Wet 4 Dot Placard Sign
Mfr # SPLOTAG1
Key Features:
- Item: Danger Tag/Lock To Be Rmvd Only,PK10
Mfr # DL4BTB
Key Features:
- Item: Placard Sign,3 Flammable Liquids Blank
Mfr # DL150BTB10
Key Features:
- Item: Flam/Non-Flam Blank Poison,2,PK10
Mfr # DL186TB
Key Features:
- Item: Placard Sign,1301 3 Flammable Dot
Mfr # DL152BTB
Key Features:
- Item: Flammable Non-Flammable Blank Poison,2
Mfr # DL63BTB
Key Features:
- Item: Placard Sign,5.2 Oxidizer And Organic Pe
Mfr # DL64BTB
Key Features:
- Item: Placard Sign,4 Flammable Solids Blank Do
- Legend: No Legend - Blank Square in the Middle - 4
- Material: Tag Board, Card Stock Vinyl
Mfr # DL42BTB
Key Features:
- Item: Placard Sign,1075 2 Dot
Mfr # DL45TB
Key Features:
- Item: Placard Sign,1.6 Explosives N1 Dot
Mfr # DL184TB10
Key Features:
- Item: Placard Sign,2920 8 Corrosive Dot,PK10
Mfr # 105664
Key Features:
- Item: Lockout Tag
- Header: None/ No Header
- Legend: V-1
Mfr # 65442
Key Features:
- Width: 3 in
- Material: Cardstock
- Write on Surface: Yes
Mfr # 65443
Key Features:
- Tie Material: Cotton
- Grommet Material: Metal
- Withstand Pull Force: 50 lb
About Safety Tags & Identification
Lockout tags safely identify which machine or systems have been properly shut off. Industrial workplaces have known lockout tagout, or LOTO procedures. This entails safety tags, along with locking devices, such as lockout hasps, to be placed onto equipment that needs repairs. The safety tags have blank lines for writing remarks, and a signature block for the person who is requesting the lock out. This states that a device or machine cannot be turned back on until repairs have been completed. We have individual tag items, lock out tag out kits, and lock out stations that permit safety. For additional locking mechanisms to take the procedures a step further, we have lockout padlocks and electrical lockout devices such as wall switch locks.