110 Results for Programmable Logic Controllers by MOXA
Brand
MOXA
Mfr # ioLogik E2214
Key Features:
- Mounting: DIN rail or wall
- Isolation: 3k VDC or 2k Vrms
- Serial Line Protection: 15 kV ESD for all signals
Mfr # ioLogik E1240
Key Features:
- Mounting: DIN rail or wall
- Safety: UL 508
- Protection: 1.5 kV magnetic isolation
Mfr # ioLogik E1242-T
Key Features:
- Mounting: DIN rail or wall
- Digital Inputs: 4 channels
- Over-temperature Shutdown: 175°C (typical), 150°C (min.)
Mfr # ioLogik E1241
Key Features:
- Mounting: DIN rail or wall
- Resolution: 12 bits
- EMI: EN 55022; EN 61000-3-2; EN 61000-3-3; FCC Part 15, Subpart B, Class A
Mfr # ioLogik E1214
Key Features:
- Mounting: DIN rail or wall
- Relay Outputs: 6 channels
- Electrical Endurance: 100,000 operations @ 5 A resistive load
Mfr # ioThinx 4510-T
Key Features:
- IEC 61000-4-6 CS: 10 V
- IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m
- Operating Temperature: -40 to 75°C (-40 to 167°F)
Mfr # ioLogik E1242
Key Features:
- Mounting: DIN rail or wall
- Protection: 1.5 kV magnetic isolation
- Pulse Output Frequency: 500 Hz
Mfr # 45MR-1600-T
Key Features:
- IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV
- IEC 61000-4-5 Surge: Power: 2 kV; Signal: 1 kV
- Standard Models: -20 to 60°C (-4 to 140°F)
Mfr # ioLogik 2542
Key Features:
- Mounting: DIN rail, wall
- Dry Contact: On: short to GND; Off: open
- Input Impedance: > 1M ohms (min.)
Mfr # ioLogik E2210
Key Features:
- Mounting: DIN rail or wall
- Time: 213,673 hrs
- Over-current Protection: 2.6 A (4 channels @ 650 mA)
Mfr # ioLogik E1213
Key Features:
- Mounting: DIN rail or wall
- Voltage: 15 to 30 VDC (12 or 9 VDC configurable by jumper on the 4 DO channels)
- Safety: UL 508
Mfr # 45MR-2601-T
Key Features:
- IEC 61000-4-6 CS: 10 V
- IEC 61000-4-5 Surge: Power: 2 kV; Signal: 1 kV
- Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Mfr # 45MR-3800-T
Key Features:
- Per channel: 12.5 samples/sec
- Standard Models: -20 to 60°C (-4 to 140°F)
- IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV
Mfr # ioLogik E1210
Key Features:
- Mounting: DIN rail or wall
- Sensor Type: Wet Contact (NPN or PNP), Dry Contact
- Altitude: Up to 2000 m
Mfr # ioMirror E3210
Key Features:
- EMI: FCC Part 15 Subpart B Class A, EN 55022 Class A
- Safety: UL 508
- Over-current Protection: 2.6 A (4 channels @ 650 mA)
Mfr # ioLogik E1211
Key Features:
- Mounting: DIN rail or wall
- Type: Sink
- Vibration: IEC 60068-2-6
Mfr # 45MR-2606
Key Features:
- IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV
- Wide Temp. Models: -40 to 75°C (-40 to 167°F)
- IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m
Mfr # ioLogik E1214-T
Key Features:
- Mounting: DIN rail or wall
- I/O Mode: DI or Event Counter
- Wiring: I/O cable max. 14 AWG
Mfr # ioLogik E1260
Key Features:
- Mounting: DIN rail or wall
- Isolation: 3k VDC or 2k Vrms
- Dimensions: 27.8 x 124 x 84 mm (1.09 x 4.88 x 3.31 in)
Mfr # ioLogik E1240-T
Key Features:
- Mounting: DIN rail or wall
- Input Impedance: 10M ohms (min.)
- Time: 474,053 hrs
Mfr # ioLogik E1212
Key Features:
- Mounting: DIN rail or wall
- Database: Telcordia (Bellcore)
- Wet Contact (DI to COM): On: 10 to 30 VDC; Off: 0 to 3 VDC
Mfr # ioLogik R1214
Key Features:
- Relay Outputs: 6 channels
- EMS: EN 55024, EN 61000-4-2 (ESD) Level 3, EN 61000-4-5 (Surge) Level 2; IEC 61000-4, IEC 61000-6
- Pulse Output: 0.3 Hz at rated load
Mfr # ioLogik E1210-T
Key Features:
- Mounting: DIN rail or wall
- Safety: UL 508
- Ambient Relative Humidity: 5 to 95% (non-condensing)
Mfr # ioLogik E2212
Key Features:
- Mounting: DIN rail or wall
- Counter Frequency: 900 Hz
- Ambient Relative Humidity: 5 to 95% (non-condensing)
Mfr # ioLogik 2542-T
Key Features:
- Mounting: DIN rail, wall
- Serial Ports: 2, RJ45, 3-in-1 interface
- Over-current Protection: 1.5 A per channel @ 25°C
Mfr # ioLogik E1241-T
Key Features:
- Mounting: DIN rail or wall
- Wiring: I/O cable max. 14 AWG
- Shock: IEC 60068-2-27
Mfr # ioLogik E1212-T
Key Features:
- Mounting: DIN rail or wall
- Pulse Output Frequency: 500 Hz
- Counter Frequency: 250 Hz
Mfr # ioLogik R1240
Key Features:
- Sampling Rate (all channels): 12 Hz
- Dimensions: 27.8 x 124 x 84 mm (1.09 x 4.88 x 3.31 in)
- Type: Differential input
Mfr # ioLogik E2240-T
Key Features:
- Mounting: DIN rail or wall
- Accuracy: ±0.1% FSR @ 25°C; ±0.3% FSR @ -10 and 60°C; ±0.5% FSR @ -40 and 75°C
- Power Input: 24 VDC nominal, 12 to 36 VDC
Mfr # ioLogik E2242
Key Features:
- Mounting: DIN rail or wall
- Type: Sink, Differential input
- I/O Mode: Voltage / Current, DI or event counter, DO or Pulse Output
Mfr # 85M-6810-T
Key Features:
- Millivolt Type: Mode: ±78.126 mV, ±39.062 mV, ±19.532 mV; Fault and over-voltage protection: -35 to +35 VDC; (power off); -25 to +30 VDC (power on)
- Accuracy: ±0.1% FSR @ 25°C; ±0.3% FSR @ -40 and 75°C
- Isolation: 3K VDC or 2K Vrms
Mfr # ioLogik R1241-T
Key Features:
- Output Range: 0 to 10 VDC, 4 to 20 mA
- Dimensions: 27.8 x 124 x 84 mm (1.09 x 4.88 x 3.31 in)
- Operating temperature: Standard Models: -10 to 75°C (14 to 167°F); Wide Temp. Models: -40 to 85°C (-40 to 185°F)
Mfr # ioThinx 4510
Key Features:
- IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m
- IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV
- IEC 61000-4-6 CS: 10 V
Mfr # ioLogik E1262
Key Features:
- Mounting: DIN rail or wall
- Ethernet: 2 switched 10/100 Mbps RJ45 ports
- Input Impedance: 10M ohms
Mfr # ioLogik R1212-T
Key Features:
- Storage temperature: -40 to 85°C (-40 to 185°F)
- Isolation: 3k VDC or 2k Vrms
- Serial Line Protection: ESD Protection: 15 kV; Surge Protection: 1 kV
Mfr # 85M-6600-T
Key Features:
- Standards: Telcordia SR332
- EMS: IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV; IEC 61000-4-3 RS: 5100 MHz to 6000 MHz: 3 V/m; IEC 61000-4-4 EFT: Power: 1 kV; Signal: 0.5 kV; IEC 61000-4-5 Surge: Power: 2 kV; Signal: 1 kV; IEC 61000-4-6 CS: 10 V; IEC 61000-4-8 PFMF
- RTD Channels: 6
About Programmable Logic Controllers
Programmable controllers (AKA programmable logic controller) are used to control lots of different processes in industry, such as machinery on assembly lines. Because their logic control programming can be easily reconfigured, so can the automated processes they control, thereby lending greater versatility to production processes. They are also used to control a wide variety of non-industrial timed and sequential processes such as traffic signals, as well as fireworks displays and other amusements. PLC’s are supported by a wide variety of programmable controller accessories.