111 Results for Programmable Logic Controls (PLC) by MOXA
Key Features:
- Mounting: DIN rail or wall
- Isolation: 3k VDC or 2k Vrms
- Serial Line Protection: 15 kV ESD for all signals
Key Features:
- Mounting: DIN rail or wall
- Safety: UL 508
- Protection: 1.5 kV magnetic isolation
Key Features:
- Mounting: DIN rail or wall
- Relay Outputs: 6 channels
- Electrical Endurance: 100,000 operations @ 5 A resistive load
Key Features:
- Mounting: DIN rail or wall
- Resolution: 12 bits
- EMI: EN 55022; EN 61000-3-2; EN 61000-3-3; FCC Part 15, Subpart B, Class A
Key Features:
- Mounting: DIN rail or wall
- Digital Inputs: 4 channels
- Over-temperature Shutdown: 175°C (typical), 150°C (min.)
Key Features:
- Mounting: DIN rail or wall
- Time: 213,673 hrs
- Over-current Protection: 2.6 A (4 channels @ 650 mA)
Key Features:
- Mounting: DIN rail or wall
- Protection: 1.5 kV magnetic isolation
- Pulse Output Frequency: 500 Hz
Key Features:
- IEC 61000-4-6 CS: 10 V
- IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m
- Operating Temperature: -40 to 75°C (-40 to 167°F)
Key Features:
- IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV
- IEC 61000-4-5 Surge: Power: 2 kV; Signal: 1 kV
- Standard Models: -20 to 60°C (-4 to 140°F)
Key Features:
- Mounting: DIN rail or wall
- Voltage: 15 to 30 VDC (12 or 9 VDC configurable by jumper on the 4 DO channels)
- Safety: UL 508
Key Features:
- IEC 61000-4-6 CS: 10 V
- IEC 61000-4-5 Surge: Power: 2 kV; Signal: 1 kV
- Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Key Features:
- Mounting: DIN rail or wall
- Sensor Type: Wet Contact (NPN or PNP), Dry Contact
- Altitude: Up to 2000 m
Key Features:
- Mounting: DIN rail, wall
- Dry Contact: On: short to GND; Off: open
- Input Impedance: > 1M ohms (min.)
Key Features:
- Per channel: 12.5 samples/sec
- Standard Models: -20 to 60°C (-4 to 140°F)
- IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV
Key Features:
- EMI: FCC Part 15 Subpart B Class A, EN 55022 Class A
- Safety: UL 508
- Over-current Protection: 2.6 A (4 channels @ 650 mA)
Key Features:
- Mounting: DIN rail or wall
- Type: Sink
- Vibration: IEC 60068-2-6
Key Features:
- Mounting: DIN rail or wall
- I/O Mode: DI or Event Counter
- Wiring: I/O cable max. 14 AWG
Key Features:
- IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV
- Wide Temp. Models: -40 to 75°C (-40 to 167°F)
- IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m
Key Features:
- Mounting: DIN rail or wall
- Power Consumption: 170 mA @ 24 VDC
- Shock: IEC 60068-2-27
Key Features:
- Mounting: DIN rail or wall
- Input Impedance: 10M ohms (min.)
- Time: 474,053 hrs
Key Features:
- Mounting: DIN rail or wall
- Database: Telcordia (Bellcore)
- Wet Contact (DI to COM): On: 10 to 30 VDC; Off: 0 to 3 VDC
Key Features:
- Mounting: DIN rail or wall
- Isolation: 3k VDC or 2k Vrms
- Dimensions: 27.8 x 124 x 84 mm (1.09 x 4.88 x 3.31 in)
Key Features:
- Sampling Rate (all channels): 12 Hz
- Dimensions: 27.8 x 124 x 84 mm (1.09 x 4.88 x 3.31 in)
- Type: Differential input
Key Features:
- Mounting: DIN rail or wall
- Safety: UL 508
- Ambient Relative Humidity: 5 to 95% (non-condensing)
Key Features:
- Mounting: DIN rail, wall
- Serial Ports: 2, RJ45, 3-in-1 interface
- Over-current Protection: 1.5 A per channel @ 25°C
Key Features:
- Mounting: DIN rail or wall
- Counter Frequency: 900 Hz
- Ambient Relative Humidity: 5 to 95% (non-condensing)
Key Features:
- Mounting: DIN rail or wall
- Accuracy: ±0.1% FSR @ 25°C; ±0.3% FSR @ -10 and 60°C; ±0.5% FSR @ -40 and 75°C
- Power Input: 24 VDC nominal, 12 to 36 VDC
Key Features:
- Millivolt Type: Mode: ±78.126 mV, ±39.062 mV, ±19.532 mV; Fault and over-voltage protection: -35 to +35 VDC; (power off); -25 to +30 VDC (power on)
- Accuracy: ±0.1% FSR @ 25°C; ±0.3% FSR @ -40 and 75°C
- Isolation: 3K VDC or 2K Vrms
Key Features:
- Output Range: 0 to 10 VDC, 4 to 20 mA
- Dimensions: 27.8 x 124 x 84 mm (1.09 x 4.88 x 3.31 in)
- Operating temperature: Standard Models: -10 to 75°C (14 to 167°F); Wide Temp. Models: -40 to 85°C (-40 to 185°F)
Key Features:
- Mounting: DIN rail or wall
- Ethernet: 2 switched 10/100 Mbps RJ45 ports
- Input Impedance: 10M ohms
Key Features:
- IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m
- IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV
- IEC 61000-4-6 CS: 10 V
Key Features:
- Relay Outputs: 6 channels
- EMS: EN 55024, EN 61000-4-2 (ESD) Level 3, EN 61000-4-5 (Surge) Level 2; IEC 61000-4, IEC 61000-6
- Pulse Output: 0.3 Hz at rated load
Key Features:
- Storage temperature: -40 to 85°C (-40 to 185°F)
- Isolation: 3k VDC or 2k Vrms
- Serial Line Protection: ESD Protection: 15 kV; Surge Protection: 1 kV
Key Features:
- Mounting: DIN rail or wall
- Type: Sink, Differential input
- I/O Mode: Voltage / Current, DI or event counter, DO or Pulse Output
Key Features:
- Mounting: DIN rail or wall
- Wiring: I/O cable max. 14 AWG
- Shock: IEC 60068-2-27
Key Features:
- Operating temperature: Standard Models: -10 to 75°C (14 to 167°F); Wide Temp. Models: -40 to 85°C (-40 to 185°F)
- Pulse Output: 0.3 Hz at rated load
- Serial Line Protection: ESD Protection: 15 kV; Surge Protection: 1 kV
About Programmable Logic Controls (PLC)
Programmable Logic Controls, or PLCs, are electronic devices designed to control and monitor various types of machinery and industrial processes. PLCs are often used in manufacturing, automotive, and food processing industries, among others, to automate tasks, reduce errors, and increase efficiency. By using programmable controls, businesses can improve productivity, reduce costs, and maintain quality control standards.
Types of Programmable Logic Controls (PLC)
There are several types of programmable logic controllers available, each with its own set of features and capabilities. Temperature controllers, for example, are designed to measure and control temperature in heating and cooling systems, while position indicators are used to track the position of moving parts. Logic controllers are used to perform complex logical operations, while voltage, width, and depth controllers are used to manage electrical signals and currents. The type of PLC used will depend on the specific needs and requirements of the application.
How Programmable Logic Controls (PLC) are Made
PLCs are typically constructed from high-quality materials and components to ensure reliability and durability. These devices typically include a processor, memory, input/output modules, power supply, and communication ports. The processor is the central component of the PLC and is responsible for executing instructions and managing the input/output modules. Memory is used to store programs, data, and configuration settings, while input/output modules are used to communicate with sensors and other devices. Communication ports enable the PLC to exchange data with other devices, such as computers and monitoring systems.
Industries that use Programmable Logic Controls (PLC)
Programmable Logic Controls are commonly used in various industries, including manufacturing, automotive, food processing, and packaging. These devices are used by professionals such as engineers, technicians, and maintenance personnel to monitor and control various aspects of production, such as temperature, pressure, speed, and quality control. PLCs can be programmed to perform a wide range of functions, from simple on/off control to complex logical operations, making them an essential tool for modern manufacturing and industrial processes.
Find the Programmable Logic Controls (Plc) You Need at Zoro
Looking for a specific item? Use our robust search tool to find it by name or keyword, or use our handy filters to narrow down our full assortment. You can also check out our whole selection of electrical supplies, along with other tools or equipment to ensure you have all you need to tackle the job, especially if you're taking on a DIY project for the first time. Plus, when you shop at Zoro, you'll always enjoy competitive prices on tons of great brands you know and trust. We make the shopping experience as fast and seamless as possible with free shipping on orders over $50 for registered users, Net 30 payment terms for qualifying customers, and an unparalleled customer service experience.