1 in. x 2 in. Stamped Stainless Steel, Natural Finish Window Flip Lock (2 Pack)

This window flip lock is constructed of stamped steel and comes in an stainless steel finish. Features a simple to install, and simple to operate design for use on vertical sliding (single and double hung) wood windows. Upon mounting this lock on the stile face, towards the bottom of the upper sash, it creates a wedge between the top and bottom sash preventing the bottom sash to be lifted. The hinged wedge design can be swung opened to allow for opening of lower sash. Designed for use on single glazed/single pane vertical sliding wood windows for ventilation, or secondary locking purposes. Warning! To avoid glass breaking, on narrow sash frames, measure the vertical window sash from glass edge. IF LESS THAN 3/4 INCH THICK, CUT THE NAILS TO 5/16 INCH LONG BEFORE INSTALLING. NOT RECOMMENDED FOR DUAL PANE WINDOWS.

• •Double hung flip locks like these are most commonly used on wood-constructed single and double hung vertical sliding windows
• •This lock features a wedge-shaped hinged flaps which are designed to stop the sash from sliding
• •Universal design allows this lock to be used on windows by multiple manufacturers
• •Warning! To avoid glass breaking, on narrow sash frames, measure the vertical window sash from glass edge. IF LESS THAN 3/4 INCH THICK, CUT THE NAILS TO 5/16 INCH LONG BEFORE INSTALLING. NOT RECOMMENDED FOR DUAL PANE WINDOWS.
• •Please refer to the line art drawing for dimensions and compare with your needs before ordering