2,500+ Results for Pressure Switches - Page 41
Key Features:
- Features: Up to 1500 VAC RMS electrical isolation; Easily installed on industry standard 35 mm DIN rail; Low voltage SCL units also available
- Mounting: Mounts on industry standard 35 mm DIN Rail (DIN EN50022-35).
Key Features:
- Item: Pressure Switch
- Pressure Switch Application: Water Pump
- Pressure Switch Port Type: (1) Port, 1/4 in FNPS
Key Features:
- Item: Pressure Switch
- Pressure Switch Electrical Contact Form: 1 C/O
- Pressure Switch Action: Detection of 1 single threshold
Key Features:
- Item: Explosion Proof Pressure Switch
- Pressure Switch Range: 500 to 5000 psi
- Pressure Switch Electrical Contact Form: SPDT
Key Features:
- Item: Compound Digital Pressure Switch
- Pressure Switch Range: -14.5 psi Vac to 145 psi
- Pressure Switch Electrical Contact Form: (2) SPST
Key Features:
- Item: Pressure Switch
- Pressure Switch Port Type: (1) Port, 1/2 in FNPT
- Pressure Switch Differential: 5 to 12.5 psi
Key Features:
- Wetted Materials: Brass, 403 SS, or 316 SS.
- Features: Visible calibrated dial provides an easy and fast check without having to open device causing dangerous conditions to operators; On/off indication (except hermetically sealed snap switch models) gives operator clear indication of state of switched equipment that could be located in another location; Adjustable or fixed deadband supports control applications by reducing equipment wear-out by unnecessary recycling; External switch setpoint adjustments reduces set-up time; Pressure ranges of full vacuum to 8000 psig gives application designers the ability to specify standard equipment, simplifying install and training, and reducing servicing costs; UL listed, CSA approved many models FM approved to support rigorous process applications and regulations; General purpose, weatherproof or explosion-proof enclosures for a variety of indoor or outdoor environments meeting the needs of multiple applications and uses
- Electrical Connections: Screw terminal.
Key Features:
- Item: Pressure Switch
- Pressure Switch Application: Air Compressor
- Manual Switch Action: None
Key Features:
- Item: Pressure Switch
- Pressure Switch Electrical Contact Form: 1 C/O
- Pressure Switch Action: Regulation between 2 thresholds
Key Features:
- Item: Pressure Switch
- Manual Switch Action: Auto/Off/Reset
- Pressure Switch Port Type: (1) 3/8 in FNPT, (3) 1/4 in FNPT, (4) Port
Key Features:
- Item: Pressure Switch
- Pressure Switch Electrical Contact Form: 1 C/O
- Pressure Switch Action: Detection of 1 single threshold
Key Features:
- Item: Pressure Switch
- Pressure Switch Port Type: (1) Port, 1/4 in FNPT
- Pressure Switch Factory On/Off Setting: 90% of Range
Key Features:
- Item: Pressure Switch
- Pressure Switch Electrical Contact Form: 1 C/O
- Pressure Switch Action: Regulation between 2 thresholds
Key Features:
- Promotion Restriction: Not eligible for promotion
Key Features:
- Item: Pressure Switch
Key Features:
- Item: Pressure Switch
- Pressure Switch Electrical Contact Form: 1 C/O
- Pressure Switch Action: Detection of 1 single threshold
Key Features:
- Item: Pressure Switch
- Pressure Switch Electrical Contact Form: 1 C/O
- Pressure Switch Action: Detection of 1 single threshold
Key Features:
- Item: Explosion Proof Pressure Switch
- Pressure Switch Range: 200 to 2000 psi
- Pressure Switch Electrical Contact Form: SPDT
Key Features:
- Item: Compound Digital Pressure Switch
- Pressure Switch Range: -30 in Hg Vac to 30 in Hg
- Pressure Switch Electrical Contact Form: SPST
Key Features:
- Size: 4" (101.6 mm) dial face, 5" (127 mm) OD x 3-1/8" (79.38 mm).
- Accuracy: ±2% of FS (3000-0 ±3% of FS). (3000-00 ±4% of FS).
- Features: Gage reading unaffected by switch operation and will continue to read pressure even during power loss; Zero and range adjustments outside of gage means no disassembly in normal service; Solid-state design allows for switching in high cycle rate applications without degradation
Key Features:
- Features: Visible calibrated dial provides an easy and fast check without having to open device causing dangerous conditions to operators; On/off indication (except hermetically sealed snap switch models) gives operator clear indication of state of switched equipment that could be located in another location; Adjustable or fixed deadband supports control applications by reducing equipment wear-out by unnecessary recycling; External switch setpoint adjustments reduces set-up time; Pressure ranges of full vacuum to 8000 psig gives application designers the ability to specify standard equipment, simplifying install and training, and reducing servicing costs; UL listed, CSA approved many models FM approved to support rigorous process applications and regulations; General purpose, weatherproof or explosion-proof enclosures for a variety of indoor or outdoor environments meeting the needs of multiple applications and uses
- Electrical Connections: Screw terminal.
- Wetted Materials: Brass, 403 SS, or 316 SS.
About Pressure Switches
Pressure Switches are an essential tool for a variety of applications. Pressure switches are devices used to detect pressure changes in gases or liquids and then activate or deactivate electrical circuits accordingly. They are often used in industrial settings, but can also be used in residential and commercial settings.
Types of Pressure Switches
Pressure switches come in many different types, depending on the application. For example, low-pressure switches may be designed to detect changes at very small pressures while high-pressure switches may need to detect much higher pressures. Some pressure switches may also be designed with specific materials that can better withstand certain environmental conditions.
How Pressure Switches are Made
Pressure Switches are usually made from a combination of metal components such as brass, steel, and aluminum. These metals provide strength and durability for the switch’s housing and internal parts. Other components such as rubber seals, gaskets, diaphragms, springs, valves, sensors and other components are also typically included in the construction of pressure switches.
Industries that use Pressure Switches
Pressure switches can be found across many industries including automotive manufacturing plants, chemical processing plants, oil refineries and power plants. Professionals working in these industries rely on pressure switches to accurately monitor system pressures so they can make sure their systems operate safely and efficiently.
Find the Pressure Switches You Need at Zoro
Looking for a specific item? Use our robust search tool to find it by name or keyword, or use our handy filters to narrow down our full assortment. You can also check out our whole selection of electrical supplies, along with other tools or equipment to ensure you have all you need to tackle the job, especially if you're taking on a DIY project for the first time. Plus, when you shop at Zoro, you'll always enjoy competitive prices on tons of great brands you know and trust. We make the shopping experience as fast and seamless as possible with free shipping on orders over $50 for registered users, Net 30 payment terms for qualifying customers, and an unparalleled customer service experience.