127 Results for Direct Drive Blower Motors by DAYTON
DAYTON
Key Features:
- Full Load Amps: 2.6 A
- Motor Mounting Type: Stud
- HP: 1/8
Key Features:
- Motor Enclosure Design: Open Air-Over
- Motor Bearings: Ball
- Full Load Amps: 4.0 A
Key Features:
- Shaft Dia.: 1/2 in
- Mounting Stud Pattern: 3-5/8 in x 3-5/8 in
- Motor Mounting Position: All Angle
Key Features:
- Voltage Compatibility: 115/208-230V AC, 115/230V AC, 115V AC, 120/240V AC, 120V AC
- Motor Thermal Protection: Auto
- RPM Range: 1,001-1,100
Key Features:
- Motor Shaft Design: Flat
- Motor Application: HVAC/R
- Frame: 48YZ
Key Features:
- Item: Direct Drive Blower Motor
- Shaft Length: 6 in
- RPM Range: 1,601-1,700
Key Features:
- Application: Blowers, Fans and Air Circulators
- Motor Shaft Rotation: CW/CCW
- Full Load Amps: 2.6 A
Key Features:
- Resilient Ring Dia.: 2 1/4 in
- Frame: 48YZ
- Full Load Amps: 4.2 A
Key Features:
- Shaft Length: 6 in
- Nominal Efficiency: 64.5 %
- Item: Direct Drive Blower Motor
Key Features:
- Length Less Shaft: 6 3/16 in
- Overall Length: 12 3/16 in
- Motor Sub Application: Direct Drive
Key Features:
- Duty: Continuous
- Motor Enclosure Design: Open Air-Over
- Motor Thermal Protection: Auto
Key Features:
- Motor Shaft Rotation: CWLE
- Voltage Compatibility: 115/208-230V AC, 115/230V AC, 115V AC, 120/240V AC, 120V AC
- Replacement For: 4YC86
Key Features:
- Motor Thermal Protection: Auto
- Standards: CSA Certified (258501), UL Recognized (E37403)
- Shaft Length: 6 in
Key Features:
- Frame: 56Z
- RPM Range: 1,001-1,100
- Voltage: 115V AC
Key Features:
- Motor Thermal Protection: Auto
- Motor Application: HVAC/R
- Nameplate RPM: 1,550
Key Features:
- Ring to Ring Center: 7 3/8 in
- Phase: Single
- Stud Size: #10-32
Key Features:
- Standards: CSA Certified, UL Recognized
- No. of Speeds: 1
- Ins. Class: B
Key Features:
- Mounting Stud Location: Shaft End
- Replacement For: 4HZ36, 4HZ38, 4HZ40, 4HZ42, 5DVR9, 5DVT1
- Motor Mounting Position: All Angle
Key Features:
- Max. Ambient Temp.: 40 Degrees C
- Phase: Single
- RPM Range: 1,601-1,700
Key Features:
- Motor Application: HVAC/R
- No. of Speeds: 3
- Mounting Stud Pattern: 2-3/4 in x 2-3/4 in
Key Features:
- Length Less Shaft: 3 in
- Motor Shaft Design: Flat
- Motor Mounting Position: All Angle
Key Features:
- Motor Service Factor: 1
- Mounting Stud Pattern: 3 5/8 in x 3 5/8 in
- Voltage: 115V AC
Key Features:
- Shaft Dia.: 1/2 in
- Motor Sub Application: Direct Drive
- Motor Service Factor: 1
Key Features:
- Length Less Shaft: 7 1/4 in
- Motor Sub Application: Direct Drive
- Hz: 60 Hz
Key Features:
- Application: Blowers, Fans and Air Circulators
- Mounting Stud Pattern: 3-5/8 in x 3-5/8 in
- Mounting Stud Location: Opposite Shaft End
Key Features:
- Max. Ambient Temp.: 40 Degrees C
- Ins. Class: B
- Nameplate RPM: 1,075
Key Features:
- Item: Direct Drive Blower Motor
- Motor Shaft Rotation: CW/CCW
- Bolt Circle Dia.: 5 1/8 in
Key Features:
- Motor Mounting Position: All Angle
- Length Less Shaft: 6 1/4 in
- Capacitor Required: Included
Key Features:
- Motor Mounting Type: Stud
- Shaft Dia.: 1/2 in
- Application: Blowers, Fans and Air Circulators
Key Features:
- Ins. Class: B
- Motor Bearings: Ball
- Motor Service Factor: 1
Key Features:
- Motor Shaft Rotation: CW/CCW
- Voltage Compatibility: 208-230/277V AC, 230/277V AC, 265V AC, 277/230V AC, 277V AC
- Capacitor Required: 2MDV3
Key Features:
- Body Dia.: 5 5/8 in
- HP: 1/8
- Shaft Length: 2 1/2 in
Key Features:
- Item: Direct Drive Blower Motor
- Nominal Efficiency: 62.9 %
- RPM Range: 1,601-1,700
Key Features:
- Includes: 2-1/2 in Ring Conversion Kit
- Phase: Single
- Standards: CSA Certified (258501), UL Recognized (E37403)
Key Features:
- Nominal Efficiency: 69.5 %
- Standards: CSA Certified (258501), UL Component Recognition (E37403)
- Motor Thermal Protection: Auto
Key Features:
- Motor Thermal Protection: None
- Nameplate RPM: 1,725
- Body Dia.: 6 1/2 in