1,000+ Results for Media Converters & Data Adapter Kits by PERLE SYSTEMS
Key Features:
- Size: Maximum frame size of 10,240 bytes -- Gigabit; Maximum frame size of 2048 bytes -- Fast Ethernet
- Number of ST Ports: 1
- Network Technology: 1000Base-SX, 10/100/1000Base-T
Key Features:
- Size: Maximum frame size of 10,240 bytes -- Gigabit; Maximum frame size of 2048 bytes -- Fast Ethernet
- Universal AC/DC adapter: 100-240v AC, regulated 48vDC adapter included for PoE; 100-240v AC, regulated 56vDC adapter included for PoE+
- Loopback ( 1/2 ): The media converter can perform a loopback on the 1000Base-X fiber interface; Disabled (Default - Up); Enabled- The 1000Base-X receiver is looped to the 1000Base-X transmitter. The copper transmitter is taken off the interface; A loopack switch for each fiber connection; On dual fiber units, if one or both ports have loopback enable, all copper ports are disabled, but PoE power is maintained. The other fiber port is unaffected.
Key Features:
- Height: 4.7 in
- Depth: 1 in
- Width: 3.1 in
Key Features:
- Height: 0.9 in
- Width: 4.5 in
- Depth: 3.9 in
Key Features:
- Size: Maximum frame size of 10,240 bytes
- Power Connector: Dual input Terminal Block and/or T-Bus
- Copper link on / Receive activity (LKC): On: Fiber link present. Blinking slowly: Fiber link disabled because of copper link loss. Blinking quickly: Fiber link present and receiving data. Off: No fiber link present
Key Features:
- Height: 0.9 in
- Depth: 3.9 in
- Size: Maximum frame size of 10,240 bytes
Key Features:
- Size: Maximum frame size of 10,240 bytes -- Gigabit; Maximum frame size of 2048 bytes -- Fast Ethernet
- Auto-Negotiation (802.3u): Enabled (Default)- The media converter uses 802.3u Auto-negotiation on the 10/100/1000Base-T interface. It is set to advertise full duplex, half duplex, pause and remote fault capabilities; Disabled- The media converter sets the port according to the position of the speed and duplex switches.
- Laser Safety: EN 60825-1:2007
Key Features:
- Depth: 4.7 in
- Height: 1 in
- Size: Maximum frame size of 2048 bytes
Key Features:
- Product Type: Transceiver/Media Converter
- Network Technology: 100Base-TX, 100Base-LX
- Fiber Optic Cable Standard: 9/125 µm
Key Features:
- Size: Maximum frame size of 2048 bytes
- Current: 175 mA
- Filtering: 1024 MAC Addresses
Key Features:
- Size: Maximum frame size of 10,240 bytes -- Gigabit Maximum frame size of 2048 bytes -- Fast Ethernet
- Dimensions: 150 x 95 x 26 mm, 5.9 x 3.7 x 1.0 inches
- Electrical Safety: UL 60950-1
Key Features:
- Depth: 4.7 in
- Size: Maximum frame size of 2048 bytes
- Height: 1 in
Key Features:
- Size: Maximum frame size of 10,240 bytes -- Gigabit; Maximum frame size of 2048 bytes -- Fast Ethernet
- Fiber Duplex (FDF): This green LED is operational only when power is applied. The LED is on when the 10/100/1000Base-X link is operatinal in full duplex mode. The LED is off when in half duplex.
- Power Connector: 2-pin pluggable terminal block
Key Features:
- Heat Output ( BTU/HR ): 6.8
- Fiber Optic Cable: Dual ST Media Converters ; Multimode: 62.5 / 125, 50/125, 85/125, 100/140 micron; Single Mode: 9/125 micron (ITu-T 625)
- Pause: Pause should be enabled when all devices connected to the media converter support pause. Auto-Negotiation must be Enabled to use this feature; Enabled (Default)- The Media converter will advertise Pause capability during Auto-Negotiation on the 100Base-TX interface; Disabled- The Media converter will advertise that it does not have Pause capability during Auto-Negotiation on the 100Base-TX interface.
Key Features:
- Size: Maximum frame size of 10,240 bytes
- Product Type: Transceiver/Media Converter
- Fiber Optic Wavelength: 1310 nm
Key Features:
- Immunity: EN55024
- Pause: When Fiber Auto Negotiation is disabled Pause should only be enabled when all devices connected to the media converter support pause; Enabled(Default)- The Media converter will advertise Pause capable, Asymmetric pause not needed during Auto-Negotiation; Disabled- The Media converter will advertise that it does not have Pause capability during Auto-Negotiation.
- Remote Loopback: The media converter can perform a loopback on the 1000Base-X fiber interface; Disabled (Default - Up); Enabled- The 1000Base-X receiver is looped to the 1000Base-X transmitter. The 1000Base-T transmitter is taken off the interface.
Key Features:
- Size: Maximum frame size of 10,240 bytes -- Gigabit; Maximum frame size of 2048 bytes -- Fast Ethernet
- Fiber Fault Alert: The Fiber Fault Alert switch has meaning when Auto-Negotiation is disabled; Enabled (Default - Up); When the 1000Base-X receiver is off the 1000Base-X transmitter is turned off. Periodically the 1000Base-X receiver will be turned on for a short period to allow the condition to clear if the 1000Base-X link partner is using a similar feature; Disabled (Down)
- Electrical Safety: UL 60950-1
Key Features:
- Size: Maximum frame size of 10,240 bytes -- Gigabit; Maximum frame size of 2048 bytes -- Fast Ethernet
- Power Over Ethernet (PSE): up to 100 watts per port
- Heat Output ( BTU/HR ): 1 x 10/100/1000Base-T port models: 13.65 BTU/hr; 2 x 10/100/1000Base-T port models: 16 BTU/hr
Key Features:
- Emissions: FCC Part 15 Class A, EN55022 Class A
- Heat Output ( BTU/HR ): 8.53
- Fiber Fault Alert: Enabled - (default up)- If the media converter detects a loss of fiber signal on a fiber receiver, it will immediately disable its fiber transmitter signal. This, in effect, notifies the remote fiber link partner that an error condition exists on the fiber connection. The setting of this switch applies to both fiber ports; Disabled: The media converter will not monitor for fiber fault or generate them.
Key Features:
- Color: green
- Depth: 4.1 in
- Height: 3.9 in
Key Features:
- Size: Maximum frame size of 2048 bytes
- Duplex Copper: Full (Default); Half
- Power / TST: This green LED is turned on when power is applied to the media converter. Otherwise it is off. The LED will blink when in Loopback test mode.
Key Features:
- Height: 1 in
- Size: Maximum frame size of 2048 bytes
- Depth: 4.7 in
Key Features:
- Size: Maximum frame size of 10,240 bytes
- Operating temperature: -10 C to 60 C (14 F to 140 F)
- Din Rail Kit: Native
Key Features:
- Width: 4.5 in
- Height: 0.9 in
- Size: Maximum frame size of 2048 bytes
Key Features:
- Height: 1 in
- Width: 4.7 in
- Depth: 3.1 in
Key Features:
- Width: 3.1 in
- Depth: 4.7 in
- Height: 1 in
Key Features:
- Auto-Negotiation (802.3u): Enabled (Default)- The media converter uses 802.3u Auto-negotiation on the 100Base-TX interface. It is set to advertise full duplex; Disabled- The media converter sets the 100Base-TX port to full duplex.
- Operating Altitude: Up to 3,048 meters (10,000 feet)
- 100Base-TX: RJ45 connector, 2 pair CAT 5, EIA/TIA 568A/B or better cable
Key Features:
- Depth: 4.7 in
- Width: 3.1 in
- Height: 1 in
Key Features:
- Product Type: Transceiver/Media Converter
- Ethernet Technology: Fast Ethernet
- Media Type Supported: Twisted Pair, Optical Fiber
Key Features:
- Size: Maximum frame size of 2048 bytes
- Filtering: 1024 MAC Addresses
- Immunity: EN55024
Key Features:
- Operating Altitude: Up to 3,048 meters (10,000 feet)
- Operating temperature: 0° C to 50° C (32° F to 122° F)
- Bit Error Rate (BER): <10-12
Key Features:
- Size: Maximum frame size of 2048 bytes
- Magnetic Isolation: 1.5kv
- Copper link on / Receive activity (LKC): On: Copper link is present. Blinking quickly: Copper link present and receiving data. Blinking slowly: Copper link disabled because of fiber link loss. Off: No copper link present
Key Features:
- Size: Maximum frame size of 2048 bytes
- Width: 3.1 in
- Height: 1 in
Key Features:
- Height: 1.7 in
- Depth: 3.1 in
- Width: 4.7 in
Key Features:
- Current: 167 mA
- Universal AC/DC adapter: 100-240v AC, regulated DC adapter included
- Dimentions: 120 x 80 x 26 mm, 4.7 x 3.1 x 1.0 inches
Key Features:
- Width: 3.7 in
- Depth: 5.9 in
- Height: 1 in
About Media Converters & Data Adapter Kits
Media Converters & Data Adapter Kits are used to convert data signals between different types of media, such as coaxial cables, twisted pair cables, and fiber optic cables. These kits allow for the transmission of data over long distances while maintaining the integrity of the signal.
Types of Media Converters & Data Adapter Kits
Media Converters & Data Adapter Kits come in a variety of forms and configurations depending on the type of media being converted. Different kits may have different components that support various protocols or have different power requirements. Some kits also provide additional features such as signal amplification or frequency conversion.
How Media Converters & Data Adapter Kits are Made
Media Converters & Data Adapter Kits are typically constructed with components like transceivers, connectors, power supplies, and circuit boards. They are designed to be compatible with multiple communication protocols and can often be customized for specific applications.
Industries that use Media Converters & Data Adapter Kits
Media Converters & Data Adapter Kits are commonly used in a variety of industries including telecommunications, aerospace engineering, automotive manufacturing, and medical device production. Professionals in these fields rely on these kits to enable efficient data transmission across long distances.
Find the Media Converters & Data Adapter Kits You Need at Zoro
Looking for a specific item? Use our robust search tool to find it by name or keyword, or use our handy filters to narrow down our full assortment. You can also check out our whole selection of electrical supplies, along with other tools or equipment to ensure you have all you need to tackle the job, especially if you're taking on a DIY project for the first time. Plus, when you shop at Zoro, you'll always enjoy competitive prices on tons of great brands you know and trust. We make the shopping experience as fast and seamless as possible with free shipping on orders over $50 for registered users, Net 30 payment terms for qualifying customers, and an unparalleled customer service experience.