28 Results for Automotive Lifts & Stands by JET
Key Features:
- Item: Lathe
- Overall Length: 57 in
- Hz: 60
Key Features:
- Item: Lathe
- Includes: Faceplate, Knockout Rod, Live Center, Spur Center, Tool Support
- Tailstock Taper: MT2
Key Features:
- Item: Lathe
- Overall Length: 97 in
- Compound Travel (In.): 5-1/8
Key Features:
- Item: Lathe
- Features: Sliding Headstock Pivots 360 Degrees with 7 Positive Locking Positions (0 Degrees , 30 Degrees , 60 Degrees , 90 Degrees , 120 Degrees , 180 Degrees , 270 Degrees ) for Maximum Variability and Optimal User Comfort, Variable Speed from 400 to 3000 RPM, Positive Locking Tool Rest with Redesigned Clamping, Optional Extension Bed Takes the Capacity to 60 in Between Centers, Acme Thread in Tailstock
- Includes: Faceplate, Knockout Rod, Live Cone Center, Spur Center, Tool Rest
Key Features:
- Item: Lathe
- Spindle Taper: MT-3
- Number of Threads (mm): 23
Key Features:
- Item: Lathe
- Swing Over Bed (In.): 12
- Thread Range (mm): 0.4-7
Key Features:
- Item: Lathe
- Number of Threads (mm): 0
- Phase: Single
Key Features:
- Item: Lathe
- Primary Application: Metal Turning
- Includes: 200S DRO
Key Features:
- Item: Lathe
- Number of Spindle Speeds: 8
- Distance Between Centers (In.): 40
Key Features:
- Item: Lathe
- Compound Travel (In.): 5-1/8
- Spindle Bore (In.): 3-1/8
Key Features:
- Item: Lathe
- Includes: Taper Attachment
- Spindle Taper: MT-3
Key Features:
- Item: Lathe
- Swing Over Cross Slide (In.): 11
- Longitudinal Feed Rates: 122
Key Features:
- Item: Lathe
- Spindle Taper: MT-5
- Carriage Travel (In.): 72-1/2
Key Features:
- Item: Lathe
- Number of Threads (mm): 23
- Includes: Collet Closer
Key Features:
- Item: Lathe
- Number of Threads (mm): 22
- Swing Over Bed (In.): 26
Key Features:
- Item: Lathe
- Gap Length (In.): 12-1/4
- Spindle Bore (In.): 3-1/8
Key Features:
- Item: Lathe
- Spindle Speed (RPM): 25 to 1800
- Cross Feed Rates: 122
Key Features:
- Item: Lathe
- Overall Length: 74 51/64 in
- Swing In Gap (In.): 20
Key Features:
- Item: Lathe
- Swing In Gap (In.): 20
- Number of Threads (In.): 40
Key Features:
- Item: Lathe
- Longitudinal Feed Rates: 0.0012 - 0.0294
- Thread Range (In.): 4-112
Key Features:
- Item: Lathe
- Includes: Miter Gauge Assembly. Workstop Assembly. Lock Knobs. 12 in Abrasvie Disc. 6X48 in Abrasive Belt.
- Features: Two precision-ground cast iron tables have positive stops at 90 Degrees and 45 Degrees for sanding flat pieces or mitered angles; allows belt sander to be used vertically, horizontally or anywhere in-between. Exclusive dual thumbscrew belt tracking adjustment locks to keep belt on track during use. Graphite covered steel platen runs cooler increasing machine and belt life. Specially designed belt guard allows full use of the 6 in belt width and lengthDrive drum is rubber-coated for a better grip on the sanding belt resulting in less slippage. Tracking adjustment knob with quick-lock handle keeps belt on track during use. Quick-release belt tension lever makes belt changes fast and easy. Quick-lock dust cover allows fast disc changes. Single 4 in dust port on the back of the base collects dust effectively from both the belt and disc. Powerful 1-1/2HP motor easily handles the toughest sanding operations. Built-in handles for easier portability. One-piece formed steel heavy-duty closed stand with built-in casters provides solid support and portabilityIntegrated locking wheels for easy mobility.
Key Features:
- Item: Lathe
- Tailstock Taper: MT3
- Features: One of the Most Popular Jet Lathes Now Comes with an Enclosed Gear Boxenclosed Gearbox Design Provides Smooth, Quiet Operation. Fast, Easy Speed Changeshardened and Ground Gears are Featured in the Headstock and Gearboxd1-4 Spindle is Precision Ground for Accuracy and Supported by High Quality Tapered Roller Bearingsheadstock is Contantly Oiled During Operationgear Box Gives Wide Inch Threading and Feed Capabilities with No Gear Changesv-Way Bed Design is Induction Hardened and Groundgap Bed Section Provided for Larger Diameter Workindependent Leadscrew and Feed Rodwith Collet Closer
Key Features:
- Item: Lathe
- Motor HP: 10
- Number of Spindle Speeds: 12
Key Features:
- Item: Lathe
- Thread Range (In.): 4-60
- Tailstock Travel (In.): 3-1/2
Key Features:
- Item: Lathe
- Overall Width: 43 in
- Cross Feed Rates: 65
Key Features:
- Item: Lathe
- Tailstock Travel (In.): 6
- Swing Over Cross Slide (In.): 16-1/2
Key Features:
- Item: Lathe
- Spindle Bore (In.): 3-1/8
- Features: 3-1/8 in Bore Spindle is Supported by Two Tapered Bearings and One Ball Bearing of Chrome Molybdenum, Headstock Gears are Hardened, Ground and Shaved, Universal Gearbox Allows Inch, Metric, Diametral and Module Pitch Threads, No Change Gears Required, Carriage Features One-Shot Lubrication and Turcite-B on Bed Sliding Surfaces, T-Slotted Compound Slide Featuring Four-Way Tool Post, One Piece Cast Iron Base Absorbs Vibration Allowing Heavier Cuts, High Quality ANSIi Class 50 Wear Resistant Cast Iron Bed Ways are Removable, Gap Allows Large Diameter Work, Five Position Automatic Carriage Stop Increases Productivity, Meehanite Castings
Key Features:
- Item: Lathe
- Thread Range (In.): 4-56
- Overall Height: 76 in
About Automotive Lifts & Stands
Automotive Lifts & Stands are essential tools for any vehicle repair or maintenance job. They provide a safe and secure platform to work on cars, trucks, and other vehicles while keeping them off the ground. Automotive Lifts & Stands come in a variety of styles, sizes, and shapes to meet the needs of different types of jobs.
Types of Automotive Lifts & Stands
Auto lift stands, car lift safety stands, car wheel lift stands, jack stands for car lifts, lift stand cars, and vehicle lift stands are just some of the many types of Automotive Lifts & Stands available. Depending on the size and weight capacity needed for your job you can find an appropriate type that meets your needs.
How Automotive Lifts & Stands are Made
Automotive Lifts & Stands are constructed using strong materials like steel alloy with powder coating finishes to resist corrosion. The components used in their construction include heavy-duty caster wheels for easy mobility as well as adjustable locking mechanisms for added stability.
Industries that use Automotive Lifts & Stands
Automotive professionals such as mechanics and technicians rely heavily on automotive lifts & stands when performing repairs or maintenance tasks on vehicles. They also use them in auto body shops to raise vehicles off the ground so they can be worked on more efficiently.
Find the Automotive Lifts & Stands You Need at Zoro
Looking for a specific item? Use our robust search tool to find it by name or keyword, or use our handy filters to narrow down our full assortment. You can also check out our whole selection of automotive lifts & stands along with other tools or equipment to ensure you have all you need to tackle the job, especially if you're taking on a DIY project for the first time.
Plus, when you shop at Zoro, you'll always enjoy competitive prices on tons of great brands you know and trust. We make the shopping experience as fast and seamless as possible with free shipping on orders over $50 for registered users, Net 30 payment terms for qualifying customers, and an unparalleled customer service experience.