28 Results for Engine Stands by JET
Key Features:
- Item: Lathe
- Overall Length: 57 in
- Hz: 60
Key Features:
- Item: Lathe
- Includes: Faceplate, Knockout Rod, Live Center, Spur Center, Tool Support
- Tailstock Taper: MT2
Key Features:
- Item: Lathe
- Overall Length: 97 in
- Compound Travel (In.): 5-1/8
Key Features:
- Item: Lathe
- Features: Sliding Headstock Pivots 360 Degrees with 7 Positive Locking Positions (0 Degrees , 30 Degrees , 60 Degrees , 90 Degrees , 120 Degrees , 180 Degrees , 270 Degrees ) for Maximum Variability and Optimal User Comfort, Variable Speed from 400 to 3000 RPM, Positive Locking Tool Rest with Redesigned Clamping, Optional Extension Bed Takes the Capacity to 60 in Between Centers, Acme Thread in Tailstock
- Includes: Faceplate, Knockout Rod, Live Cone Center, Spur Center, Tool Rest
Key Features:
- Item: Lathe
- Spindle Taper: MT-3
- Number of Threads (mm): 23
Key Features:
- Item: Lathe
- Swing Over Bed (In.): 12
- Thread Range (mm): 0.4-7
Key Features:
- Item: Lathe
- Number of Threads (mm): 0
- Phase: Single
Key Features:
- Item: Lathe
- Primary Application: Metal Turning
- Includes: 200S DRO
Key Features:
- Item: Lathe
- Number of Spindle Speeds: 8
- Distance Between Centers (In.): 40
Key Features:
- Item: Lathe
- Compound Travel (In.): 5-1/8
- Spindle Bore (In.): 3-1/8
Key Features:
- Item: Lathe
- Includes: Taper Attachment
- Spindle Taper: MT-3
Key Features:
- Item: Lathe
- Swing Over Cross Slide (In.): 11
- Longitudinal Feed Rates: 122
Key Features:
- Item: Lathe
- Spindle Taper: MT-5
- Carriage Travel (In.): 72-1/2
Key Features:
- Item: Lathe
- Number of Threads (mm): 23
- Includes: Collet Closer
Key Features:
- Item: Lathe
- Number of Threads (mm): 22
- Swing Over Bed (In.): 26
Key Features:
- Item: Lathe
- Gap Length (In.): 12-1/4
- Spindle Bore (In.): 3-1/8
Key Features:
- Item: Lathe
- Spindle Speed (RPM): 25 to 1800
- Cross Feed Rates: 122
Key Features:
- Item: Lathe
- Overall Length: 74 51/64 in
- Swing In Gap (In.): 20
Key Features:
- Item: Lathe
- Swing In Gap (In.): 20
- Number of Threads (In.): 40
Key Features:
- Item: Lathe
- Longitudinal Feed Rates: 0.0012 - 0.0294
- Thread Range (In.): 4-112
Key Features:
- Item: Lathe
- Includes: Miter Gauge Assembly. Workstop Assembly. Lock Knobs. 12 in Abrasvie Disc. 6X48 in Abrasive Belt.
- Features: Two precision-ground cast iron tables have positive stops at 90 Degrees and 45 Degrees for sanding flat pieces or mitered angles; allows belt sander to be used vertically, horizontally or anywhere in-between. Exclusive dual thumbscrew belt tracking adjustment locks to keep belt on track during use. Graphite covered steel platen runs cooler increasing machine and belt life. Specially designed belt guard allows full use of the 6 in belt width and lengthDrive drum is rubber-coated for a better grip on the sanding belt resulting in less slippage. Tracking adjustment knob with quick-lock handle keeps belt on track during use. Quick-release belt tension lever makes belt changes fast and easy. Quick-lock dust cover allows fast disc changes. Single 4 in dust port on the back of the base collects dust effectively from both the belt and disc. Powerful 1-1/2HP motor easily handles the toughest sanding operations. Built-in handles for easier portability. One-piece formed steel heavy-duty closed stand with built-in casters provides solid support and portabilityIntegrated locking wheels for easy mobility.
Key Features:
- Item: Lathe
- Tailstock Taper: MT3
- Features: One of the Most Popular Jet Lathes Now Comes with an Enclosed Gear Boxenclosed Gearbox Design Provides Smooth, Quiet Operation. Fast, Easy Speed Changeshardened and Ground Gears are Featured in the Headstock and Gearboxd1-4 Spindle is Precision Ground for Accuracy and Supported by High Quality Tapered Roller Bearingsheadstock is Contantly Oiled During Operationgear Box Gives Wide Inch Threading and Feed Capabilities with No Gear Changesv-Way Bed Design is Induction Hardened and Groundgap Bed Section Provided for Larger Diameter Workindependent Leadscrew and Feed Rodwith Collet Closer
Key Features:
- Item: Lathe
- Motor HP: 10
- Number of Spindle Speeds: 12
Key Features:
- Item: Lathe
- Thread Range (In.): 4-60
- Tailstock Travel (In.): 3-1/2
Key Features:
- Item: Lathe
- Overall Width: 43 in
- Cross Feed Rates: 65
Key Features:
- Item: Lathe
- Tailstock Travel (In.): 6
- Swing Over Cross Slide (In.): 16-1/2
Key Features:
- Item: Lathe
- Spindle Bore (In.): 3-1/8
- Features: 3-1/8 in Bore Spindle is Supported by Two Tapered Bearings and One Ball Bearing of Chrome Molybdenum, Headstock Gears are Hardened, Ground and Shaved, Universal Gearbox Allows Inch, Metric, Diametral and Module Pitch Threads, No Change Gears Required, Carriage Features One-Shot Lubrication and Turcite-B on Bed Sliding Surfaces, T-Slotted Compound Slide Featuring Four-Way Tool Post, One Piece Cast Iron Base Absorbs Vibration Allowing Heavier Cuts, High Quality ANSIi Class 50 Wear Resistant Cast Iron Bed Ways are Removable, Gap Allows Large Diameter Work, Five Position Automatic Carriage Stop Increases Productivity, Meehanite Castings
Key Features:
- Item: Lathe
- Thread Range (In.): 4-56
- Overall Height: 76 in
About Engine Stands
Engine stands are essential pieces of equipment used to secure and hold engines while they are being worked on. They provide a safe, stable platform that can be adjusted and maneuvered as needed, making them an invaluable tool for any mechanic or automotive technician.
Types of Engine Stands
There are a variety of engine stands available depending on the size and weight of the engine being worked on. For example, 2500 lb engine stands are designed to hold lighter engines while 4000 lb engine stands are better suited for heavier applications. Additionally, there are auto engine stands, automotive engine stand, and blue point engine stand varieties available as well.
How Engine Stands Are Made
Engine stands typically consist of a sturdy steel frame with adjustable arms that can be secured into place once the desired angle is achieved. The base is also made from heavy-duty steel to ensure stability when in use. Many also feature casters for easy maneuverability when moving from one workstation to another.
Industries That Use Engine Stands
Professional mechanics, automotive technicians, and other professionals in related fields often use motor stand or professional engine stand models when working on engines. Used engine stand models can also be found in many workshops due to their affordability and reliability.
Find the Engine Stands You Need at Zoro
Looking for a specific item? Use our robust search tool to find it by name or keyword, or use our handy filters to narrow down our full assortment. You can also check out our whole selection of engine stands along with other tools or equipment to ensure you have all you need to tackle the job, especially if you're taking on a DIY project for the first time.
Plus, when you shop at Zoro, you'll always enjoy competitive prices on tons of great brands you know and trust. We make the shopping experience as fast and seamless as possible with free shipping on orders over $50 for registered users, Net 30 payment terms for qualifying customers, and an unparalleled customer service experience.