3,000+ Results for Enclosure Covers & Accessories - Page 27
Mfr # 1481WSSDH2420
Key Features:
- Item: Hinged Window
- Material: Stainless Steel
- Features: Extra deep kits are designed to provide protection and easy access to components and equipment installed inside an enclosure; Frame is 14 gauge mild steel or 316L stainless steel; Maintain environmental protection level of enclosure. Painted mild steel maintain Type 4 and 12. Stainless Steel maintain Type 4, 4X and 12; Quarter turn latch for easy access; 2.5 inches of extra usable depth; Oil resistant neoprene gasket ensures a watertight seal; Hinges can be oriented in any direction; Window is 0.25" thick, UV Resistant Polycarbonate; Conveniently sized to allow mounting on the door of any Hammond Wallmount Series enclosure, or in any other Hammond enclosure with a suitable mounting surface; Mounting hardware and template are included; Finished in ANSI 61 gray recoatable powder or natural brushed stainless steel.
Mfr # SC061206G
Key Features:
- Item: Screw Cover
- Height: 12 in
- Width: 6 in
Mfr # 14R1311
Key Features:
- Item: Enclosure Accessory
- Material: Steel
- Additional Description: Panel 12.9 x 10.9 - Fits Encl. 14 x 12 - Steel/Wht
Mfr # EP1612
Key Features:
- Item: Enclosure Accessory
- Material: Steel
- Features: Larger than standard NEMA panel used in same sized enclosure; 12gauge steel construction; Larger sizes have 2 or 4 formed flanges for added strength; Slotted corner design for easier mounting; Finished in white or unpainted galvanized.
Mfr # CWST436NK
Key Features:
- Item: Accessories
- Depth: 36
- Standards: UL-870 Type 1; cUL Type 1; Complies with IEC 60529, IP20; IEC 60529, IP20
Mfr # 2CLBC2436
Key Features:
- Item: Enclosure Accessory
- Features: Should be used to close top opening (of either single or dual access) base when no other components are mounted on the base's top; Constructed of 14 gauge steel; Available light gray and stainless steel; Can also be used on the underside of a Standard Desk Unit, Standard Turret and Data Terminal.
- Material: Steel
Mfr # 2CLP46018
Key Features:
- Item: Enclosure Accessory
- Material: Steel
- Features: Features removable front and rear panels for easy access to bottom for cabling or transport by forklift; For cable access, features 3 double knockouts on each end; Available in 4" and 8" heights; Available in 24", 36", 48" and 60" widths; Maintains NEMA rating of system; Formed 14 gauge steel; Also offered with formed 14 gauge stainless steel; Available in light gray and stainless steel.
Mfr # 1481FC10K
Key Features:
- Item: Enclosure Accessory
- Material: Steel
- Features: Kit includes two mounting feet and hardware kit; Pre-punched mounting feet may be used as a template to drill holes on bottom of enclosure; Finished in gray or natural brushed 304 stainless steel.
Mfr # EPG3624
Key Features:
- Item: Enclosure Accessory
- Material: Steel
- Additional Description: Eclipse Inner Panel - Fits Encl. 36 x 24 - Galv
Mfr # 18P2721S16
Key Features:
- Item: Enclosure Accessory
- Material: Stainless Steel
- Additional Description: PANEL 27 X 21 - FITS ENCL. 30
Mfr # PFF4000
Key Features:
- Item: Enclosure Accessory
- Size: 5.9 in x 5.9 in x 0.75 in (H x W x D)
- Additional Description: 5 FILTERS - XPFA150
Mfr # HP350
Key Features:
- Item: Enclosure Accessory
- Material: Steel
- Additional Description: Hole Plug - 3.5" Conduit - Steel/Gray
Mfr # AP3624PP
Key Features:
- Item: Enclosure Accessory
- Material: Steel
- Additional Description: Perf Panel 32 x 22.5 - Fits Encl. 36 x 24 - Steel/Gray
Mfr # EPG7230
Key Features:
- Item: Enclosure Accessory
- Material: Steel
- Additional Description: Eclipse Inner Panel - Fits Encl. 72 x 30 - Galv
Mfr # EPG1210
Key Features:
- Item: Enclosure Accessory
- Material: Steel
- Additional Description: Eclipse Inner Panel - Fits Encl. 12 x 10 - Galv
Mfr # 60AWFWG
Key Features:
- Item: Enclosure Accessory
- Material: Steel
- Additional Description: Inner Panel - Full Height - Fits Encl. 60 x 48 - Galv
Mfr # N1JP64
Key Features:
- Item: Enclosure Accessory
- Material: Steel
- Features: Replacement panels for N1J Series enclosures; Optional panels for C3R HCR SM Series enclosures; Made from 16 ga steel; White powder finish
Mfr # 1481L3R1110GY
Key Features:
- Item: Enclosure Accessory
- Material: Steel
- Additional Description: Type 3R Louver Kit 11x10 - Steel/Gray
Mfr # 14G0505
Key Features:
- Item: Enclosure Accessory
- Material: Steel
- Additional Description: Panel 4.9 x 4.9 - Fits Encl. 6 x 6 - Galv
Mfr # CWST6120NK
Key Features:
- Item: Accessories
- Depth: 120
- Standards: UL-870 Type 1; cUL Type 1; Complies with IEC 60529, IP20; IEC 60529, IP20
Mfr # 18P1713PP
Key Features:
- Item: Enclosure Accessory
- Material: Steel
- Additional Description: Perf Panel 17 x 13 - Fits Encl. 20 x 16 - Steel/Gray
Mfr # PMV3036GY
Key Features:
- Item: Enclosure Accessory
- Material: Steel
- Features: Designed to mount outdoor rated enclosures - Hammond 1414N4, Eclipse, Eclipse Junior, HWHK, and 1418N4; Individual components allow users to choose the mounting configuration and/or components to purchase Note: Eclipse Series enclosures require the use of an external Eclipse Mounting Foot Kit (sold separately); Note: Eclipse Series enclosures require the use of an external Eclipse Mounting Foot Kit (sold separately); This pole mount kit is a 2 or 3-part system.
Mfr # 60TYHWG
Key Features:
- Item: Enclosure Accessory
- Material: Steel
- Features: Formed from 10 gauge or 12 gauge steel; All double door width panels are 10 gauge steel; Width panels are available in full or half height; Depth panels are available in full height only; Depth and width panels are provided with all mounting hardware and center support where required; Half panel can be mounted in the top or bottom half of the enclosure; Finished in white.
Mfr # 14A1307
Key Features:
- Item: Enclosure Accessory
- Material: Aluminum
- Additional Description: Panel 12.9 x 6.9 - Fits Encl. 14 x 8 - Alum
Mfr # CN4ST5204
Key Features:
- Item: Splitter Trough
- Depth: 7
- Standards: CSA Certified Type 3R, 12, 4; Complies with IEC 60529, IP66; IEC 60529, IP66
Mfr # N1JP1010
Key Features:
- Item: Enclosure Accessory
- Material: Steel
- Additional Description: N1J Series Panel - Fits Encl. 10 x 10 - Steel/Wht
Mfr # EP3042
Key Features:
- Item: Enclosure Accessory
- Material: Steel
- Additional Description: Eclipse Inner Panel - Fits Encl. 30 x 42 - Steel/Wht
Mfr # PKT66
Key Features:
- Item: Enclosure Accessory
- Features: For use as additional or replacement literature and document pockets; Kit includes pocket, high strength two-sided adhesive tape and surface preparation swab; Plastic pocket is black; Packaged individually.
- Additional Description: 6 x 6 Print Pocket
Mfr # HTH127224
Key Features:
- Item: Enclosure Accessory
- Material: Steel
- Size: 12 in x 72 in x 24 in (H x W x D)
Mfr # HP125SS
Key Features:
- Item: Enclosure Accessory
- Material: Stainless Steel
- Features: Designed to seal unused push Ābutton holes, conduit openings and knock Āout holes against dust, oil and water; Standard Pushbutton size is 30.5mm; Mini Pushbutton size is 22.5mm; Steel Hole Plug Available in 12 sizes. Finished in 2 color options - ANSI 61 gray or RAL7035 Light Gray Oil resistant gasket. Secured with an 10-24 x 0.55" threaded stud and plated wing nut. Recognized component UR & cUR Type 1, 3, 3R, 4, 12 and 13; Available in 12 sizes; Finished in 2 color options - ANSI 61 gray or RAL7035 Light Gray; Oil resistant gasket; Secured with an 10-24 x 0.55" threaded stud and plated wing nut; Recognized component UR & cUR Type 1, 3, 3R, 4, 12 and 13; Type 1, 3, 3R, 4, 12 and 13; Stainless Steel Hole Plugs Available in 8 sizes. Finished in brushed natural 304 stainless steel finish. Oil resistant gasket. Secured with an 10-24 x 0.55" threaded stud and plated wing nut. Recognized component UR & cUR Type 1, 3, 3R, 4, 4X, 12 and 13; Available in 8 sizes; Finished in brushed natural 304 stainless steel finish; Oil resistant gasket; Secured with an 10-24 x 0.55" threaded stud and plated wing nut; Recognized component UR & cUR Type 1, 3, 3R, 4, 4X, 12 and 13; Type 1, 3, 3R, 4, 4X, 12 and 13
Mfr # 1481WDH3624
Key Features:
- Item: Enclosure Accessory
- Material: Steel
- Features: Extra deep kits are designed to provide protection and easy access to components and equipment installed inside an enclosure; Frame is 14 gauge mild steel or 316L stainless steel; Maintain environmental protection level of enclosure. Painted mild steel maintain Type 4 and 12. Stainless Steel maintain Type 4, 4X and 12; Quarter turn latch for easy access; 2.5 inches of extra usable depth; Oil resistant neoprene gasket ensures a watertight seal; Hinges can be oriented in any direction; Window is 0.25" thick, UV Resistant Polycarbonate; Conveniently sized to allow mounting on the door of any Hammond Wallmount Series enclosure, or in any other Hammond enclosure with a suitable mounting surface; Mounting hardware and template are included; Finished in ANSI 61 gray recoatable powder or natural brushed stainless steel.
Mfr # 1481L3R55SS
Key Features:
- Item: Enclosure Accessory
- Material: Stainless Steel
- UL File: E65324
Mfr # 14B12
Key Features:
- Item: Enclosure Accessory
- Material: Steel
- Terminal Strap: 1.5" wide x 0.187" thick steel; Each strap includes spring locking hardware; Countersunk holes in straps provide extra terminal mounting space.
Mfr # EP3048
Key Features:
- Item: Enclosure Accessory
- Material: Steel
- Features: Larger than standard NEMA panel used in same sized enclosure; 12gauge steel construction; Larger sizes have 2 or 4 formed flanges for added strength; Slotted corner design for easier mounting; Finished in white or unpainted galvanized.
About Enclosure Covers & Accessories
Properly conceal newly installed NEMA enclosures with all the electrical enclosure accessories you need from Zoro. Electrical enclosures can help protect your electrical work from dirt, debris, and spills. Whether youāre shopping for hole seals, louver plates, or other parts, we have all the finishing touches you need in a variety of styles and materials. Shop from the most trusted brands at everyday low prices. Find related products in our electrical enclosures category.