3,000+ Results for Enclosure Covers & Accessories - Page 16
Key Features:
- Item: Hinged Door Kit
- Material: Stainless Steel
- Size: 22.2 in x 26.2 in x 2.75 in (H x W x D)
Key Features:
- Item: Enclosure Accessory
- Material: Stainless Steel
- Features: Kit includes two mounting feet and hardware kit; Pre-punched mounting feet may be used as a template to drill holes on bottom of enclosure; Finished in gray or natural brushed 304 stainless steel.
Key Features:
- Item: Enclosure Accessory
- Features: Provides ventilation in enclosures for either indoor or outdoor locations; Gasketed sealing kit provides protection to NEMA 3R; Aluminum filter mesh provides ingress protection for both solid debris and outdoor rain conditions; Field installation kit includes all hardware; Louver plates are offered in both 14 gauge steel with ANSI61 Gray power coat finish or 304 Stainless Steel; Kits are sold in QTY 1. Replacement filter kits are sold in QTY 2; (Note: On Dec 1, 2019 a change was made to some of the previous louver patterns on this series - see table below for new specifications and/or the part drawing files for details. Air flow will be improved from previous designs. No change to plate size, filter size or mounting dimensions.)
- UL File: E65324
Key Features:
- Item: Accessories
- Material: Steel
- Features: Steel panels are 14 gauge steel and are finished in white; Fiberglass panels (off-white) in NEMA sizes; Aluminum panels are 0.080 type 5052 H-32 aluminum, unpainted; Galvanized panels are 14 gauge unpainted galvanized steel; Stainless steel panels are 14 gauge and are brushed 304 SS; Mounting hardware is included with the enclosure; Steel panels and mounting hardware are included with 1414 Series enclosures; Galvanized panels and mounting hardware are included with the EJ Series enclosures; Mounting hardware is included with PJ Series enclosures, order panel separately.
Key Features:
- Item: Enclosure Accessory
- Material: Steel
- Size: 44 in x 11.25 in x 1 in (H x W x D)
Key Features:
- Item: Enclosure Accessory
- Material: Steel
- Features: Larger than standard NEMA panel used in same sized enclosure; 12gauge steel construction; Larger sizes have 2 or 4 formed flanges for added strength; Slotted corner design for easier mounting; Finished in white or unpainted galvanized.
Key Features:
- Item: Enclosure Accessory
- Material: Steel
- Features: Designed to seal unused push Ābutton holes, conduit openings and knock Āout holes against dust, oil and water; Standard Pushbutton size is 30.5mm; Mini Pushbutton size is 22.5mm; Steel Hole Plug Available in 12 sizes. Finished in 2 color options - ANSI 61 gray or RAL7035 Light Gray Oil resistant gasket. Secured with an 10-24 x 0.55" threaded stud and plated wing nut. Recognized component UR & cUR Type 1, 3, 3R, 4, 12 and 13; Available in 12 sizes; Finished in 2 color options - ANSI 61 gray or RAL7035 Light Gray; Oil resistant gasket; Secured with an 10-24 x 0.55" threaded stud and plated wing nut; Recognized component UR & cUR Type 1, 3, 3R, 4, 12 and 13; Type 1, 3, 3R, 4, 12 and 13; Stainless Steel Hole Plugs Available in 8 sizes. Finished in brushed natural 304 stainless steel finish. Oil resistant gasket. Secured with an 10-24 x 0.55" threaded stud and plated wing nut. Recognized component UR & cUR Type 1, 3, 3R, 4, 4X, 12 and 13; Available in 8 sizes; Finished in brushed natural 304 stainless steel finish; Oil resistant gasket; Secured with an 10-24 x 0.55" threaded stud and plated wing nut; Recognized component UR & cUR Type 1, 3, 3R, 4, 4X, 12 and 13; Type 1, 3, 3R, 4, 4X, 12 and 13
Key Features:
- Item: Enclosure Accessory
- Material: Steel
- Features: 22P5038 is formed from 12 gauge steel, all others are 10 gauge steel; Panels and mounting hardware are included with 1422 and HN4FM Series enclosures; Finished in white.
Key Features:
- Item: Enclosure Accessory
- Material: Steel
- Additional Description: BARRIER KIT N4 WM 36HX12D
Key Features:
- Item: Enclosure Accessory
- Material: Steel
- Additional Description: Center Panel Support for 72" Encl - Steel/Wht
Key Features:
- Item: Enclosure Accessory
- Material: Steel
- Features: Easily installed on Type 12, 4 and 4X wall-mount enclosures using stainless steel bolts and sealing washers (included); Designed not to interfere with door clamps; Protects door from dripping water and settling dust; Constructed in 14 gauge mild steel (painted) or 316 stainless steel; Maintains enclosure rating.
Key Features:
- Item: Enclosure Accessory
- Material: Steel
- Bracket Assembly: Each kit consists of two or three brackets per assembly; Brackets combined with collar stud length provide 3" minimum clearance from the rear of the enclosure; "C" channel construction provides easy alignment of terminal straps.
Key Features:
- Item: Accessories
- Material: Steel
- Features: Formed from 10 gauge or 12 gauge steel; All double door width panels are 10 gauge steel; Width panels are available in full or half height; Depth panels are available in full height only; Depth and width panels are provided with all mounting hardware and center support where required; Half panel can be mounted in the top or bottom half of the enclosure; Finished in white.
Key Features:
- Item: Enclosure Accessory
- Material: Steel
- Features: Steel panels are 12 gauge steel and are finished in white; Galvanized panels are 12 gauge unpainted galvanized steel; Stainless steel panels are 12 gauge and are brushed 316 SS; Aluminum panels are 5052-H32 aluminum alloy; Larger panels have two or four formed flanges; Some larger panels are 10 gauge; Panel mounting hardware not included (provided with enclosure).
Key Features:
- Item: Enclosure Accessory
- Material: Steel
- Features: Larger than standard NEMA panel used in same sized enclosure; 12gauge steel construction; Larger sizes have 2 or 4 formed flanges for added strength; Slotted corner design for easier mounting; Finished in white or unpainted galvanized.
Key Features:
- Item: Enclosure Accessory
- Features: 115 VAC or 230 VAC, 50/60 Hz; 12" lead wires; Exceptionally quiet operation; Versatile mounting and adaptability; Heavy-gauge steel construction; Attractive stainless steel grills; Shipped with air flow to pressurize. Can be user modified to exhaust; Aluminum filter is coated with adhesive baffle surfaces for dust and dirt collection. Can be recoated after cleaning for optimum performance; Drilling template included; Note: One grill and filter are included with each fan package. Normally, an additional exhaust grill and filter are required for each installation and must be ordered separately.
- Standards: UR/CUR/CE approved fan motors; CSA listed on fan only.
Key Features:
- Item: Enclosure Accessory
- Material: Steel
- Features: For use with N1J series enclosures; Made from 16 ga steel; Accepts self tapping screws eliminating timely measurement, marking and drilling of component mounting holes; 1/8" dia holes on 1/4" staggered centers; ANSI 61 gray powder finish
Key Features:
- Item: Enclosure Accessory
- Material: Steel
- Features: Larger than standard NEMA panel used in same sized enclosure; 12gauge steel construction; Larger sizes have 2 or 4 formed flanges for added strength; Slotted corner design for easier mounting; Finished in white or unpainted galvanized.
Key Features:
- Item: Enclosure Accessory
- UL File: E65324
- Features: Provides ventilation in enclosures for either indoor or outdoor locations; Gasketed sealing kit provides protection to NEMA 3R; Aluminum filter mesh provides ingress protection for both solid debris and outdoor rain conditions; Field installation kit includes all hardware; Louver plates are offered in both 14 gauge steel with ANSI61 Gray power coat finish or 304 Stainless Steel; Kits are sold in QTY 1. Replacement filter kits are sold in QTY 2; (Note: On Dec 1, 2019 a change was made to some of the previous louver patterns on this series - see table below for new specifications and/or the part drawing files for details. Air flow will be improved from previous designs. No change to plate size, filter size or mounting dimensions.)
Key Features:
- Item: Accessories
- Depth: 4
- Standards: UL 508A type 3R; CSA C22.2 #94-M1
Key Features:
- Item: Enclosure Accessory
- Material: Steel
- Additional Description: Floor Stand Kit - 18 x 10 - Steel/Gray
Key Features:
- Item: Enclosure Accessory
- Material: Steel
- Size: 18 in x 24 in x 8 in (H x W x D)
Key Features:
- Item: Enclosure Accessory
- Material: Steel
- Additional Description: Panel 4.9 x 4.9 - Fits Encl. 6 x 6 - Steel/Wht
Key Features:
- Item: Enclosure Accessory
- Material: Steel
- Additional Description: Eclipse Inner Panel - Fits Encl. 24 x 20 - Steel/Wht
Key Features:
- Item: Enclosure Accessory
- Material: Stainless Steel
- Additional Description: Drip Shield Kit N4,4X - Fits 30" Wide Encl - 316SS
Key Features:
- Item: Accessories
- Depth: 4
- Standards: UL / cUL Listed Type 4 or 4X (as noted) must be used in combination with PF Series Filterfan; must be used in combination with PF Series Filterfan
Key Features:
- Item: Accessories
- Depth: 4
- Standards: UL / cUL Listed Type 4 or 4X (as noted) must be used in combination with PF Series Filterfan; must be used in combination with PF Series Filterfan
Key Features:
- Item: Bushing Rubber
Key Features:
- Item: Enclosure Accessory
- Features: Field installable; Interchangeable with standard quarter turn latches on Eclipse/Eclipse Jr series; Maintains NEMA, UL and CSA ratings as noted.
- Additional Description: Pad lockable quarter turn
Key Features:
- Item: Enclosure Accessory
- Material: Steel
- Additional Description: Window Kit N4 - Viewing Area 5 x 3 - Steel/Gray
Key Features:
- Item: Enclosure Accessory
- Material: Steel
- Additional Description: Swing panel for 16 x 16 encl. - Steel/Wht
Key Features:
- Item: Enclosure Accessory
- Material: Steel
- Features: For use with N1J series enclosures; Made from 16 ga steel; Accepts self tapping screws eliminating timely measurement, marking and drilling of component mounting holes; 1/8" dia holes on 1/4" staggered centers; ANSI 61 gray powder finish
Key Features:
- Item: Accessories
- Material: Steel
- Features: Formed from 10 gauge or 12 gauge steel; All double door width panels are 10 gauge steel; Width panels are available in full or half height; Depth panels are available in full height only; Depth and width panels are provided with all mounting hardware and center support where required; Half panel can be mounted in the top or bottom half of the enclosure; Finished in white.
Key Features:
- Item: Enclosure Accessory
- Size: 0.62 in x 0.62 in x 0.97 in (H x W x D)
- Additional Description: DOUBLE BIT INSERT - 3MM PIN
Key Features:
- Item: Enclosure Accessory
- Material: Steel
- Additional Description: N1J Series Panel - Fits Encl. 20 x 12 - Steel/ASA61 Grey
Key Features:
- Item: Enclosure Accessory
- Material: Steel
- Features: Larger than standard NEMA panel used in same sized enclosure; 12gauge steel construction; Larger sizes have 2 or 4 formed flanges for added strength; Slotted corner design for easier mounting; Finished in white or unpainted galvanized.
About Enclosure Covers & Accessories
Properly conceal newly installed NEMA enclosures with all the electrical enclosure accessories you need from Zoro. Electrical enclosures can help protect your electrical work from dirt, debris, and spills. Whether youāre shopping for hole seals, louver plates, or other parts, we have all the finishing touches you need in a variety of styles and materials. Shop from the most trusted brands at everyday low prices. Find related products in our electrical enclosures category.