625 Results for Cutting, Tapping, and Grinding Fluids - Page 6
Key Features:
- Color: Brown
- Container Type: Pail
- Size: 5 gal.
Key Features:
- Container Style: Pail
- Color: Yellow
- Flash Point: 182 Degrees C
Key Features:
- Item: Floor and Multi-Purpose Cleaner
- Cutting Fluid Sub-Category: Specialty Fluids
- Physical Form: Liquid
Key Features:
- Container Size: 1 gal
- Color: Opaque Green
- Specific Gravity: 0.99
Key Features:
- Item: Cutting Fluid,Aqueous,1 gal. Bottle
Key Features:
- Physical Form: Liquid
- Flash Point: 364 Degrees F
- For Use With: Ferrous, Non-Ferrous Metals
Key Features:
- Container Size: 5 gal
- pH Value: 9.4
- Base Oil: Synthetic
Key Features:
- Features: Rust Inhibitor for Corrosion Protection
- Color: Green
- Fluid Type: Metal Cutting Fluid
Key Features:
- Item: Full Synthetic Cutting Fluid,5 gal.,Pail
Key Features:
- Fluid Type: Biodegradable, Chlorine Free, No Active Sulfur, No Heavy Metals and Nonstaining, No Phosphorus, No Silicon, No Zinc
- Specific Gravity: 1
- Viscosity: 40 cSt @ 40 Degrees C, 9 cSt @ 100 Degrees C
Key Features:
- ISO Viscosity Grade: 46
- Fluid Type: Biodegradable, Chlorine Free, No Active Sulfur, No Heavy Metals and Nonstaining, No Phosphorus, No Silicon, No Zinc
- Base Oil: Vegetable Oil
Key Features:
- Item: Full Synthetic Cutting Fluid,5 gal.,Pail
Key Features:
- Container Size: 5 gal
- Features: Environmentally Friendly, Minimum Quantities Of Material At The Point Of Cut For High Material Removal Rates, Promotes Superior Finish And Tool Life And Is Compatible With All Materials, Renewable Resource Based, Very High Levels Of Lubricity With Even
- Fragrance: Mild Odor
Key Features:
- Color: White
- Size: 1 qt.
- Application: Metalworking
Key Features:
- Physical Form: Liquid
- For Use With: All Metals
- Item: Cutting Oil
Key Features:
- Item: Non-Butyl Cleaner
- Cutting Fluid Sub-Category: Specialty Fluids
- Physical Form: Liquid
Key Features:
- Base Oil: Vegetable Oil
- Viscosity: 31.3 cSt @ 40 Degrees C, 7.3 cSt @ 100 Degrees C
- Container Size: 1 gal
Key Features:
- Item: Nonchlorinatd Fluid,Siloxane Free,5 gal.
Key Features:
- For Nominal Pipe Size: 2 in
- Number of Pieces in Set: 4
- Nominal Conduit/Pipe: 2"-11-1/2 TPI
Key Features:
- Item: Cutting Fluid,Eco-Oil,5 gal. Pail
Key Features:
- Container Size: 5 gal
- Item: Direct Application Cutting Lubricant
- Form: Liquid
Key Features:
- Item: SemiSynthetic Cutting Fluid,5 gal.,Pail
Key Features:
- Item: Metal Working Cleaner,Concentrate,5 gal.
Key Features:
- Container Size: 1 gal
- Features: Compatible with Copper Containing Alloys, Ester Based Formulation Ensures Very Low Misting Potential, Excellent Extreme-Pressure Additive Package for Efficient Metal Removal, Extremely High Lubricity Ensures Fantastic Tool Life, Good Oxidation Stability, Light Color, Low Odor for Good Operator Acceptance, Low Viscosity Ensures Excellent Chip Removal In Deep-Hole Drilling, Very High Flash Point
- Application: Deep Hole Drilling, Drilling, Gear Cutting, Gun Drilling, Milling, Reaming, Tapping, Turning
Key Features:
- Container Size: 1 gal
- pH Value: 8.7 to 9.7
- Physical Form: Liquid
About Cutting, Tapping, and Grinding Fluids
Cutting, tapping, and grinding fluids are used in a variety of industries to help reduce friction, heat buildup, and wear on metalworking tools. These fluids can be used to lubricate cutting tools and surfaces while also providing cooling properties that can help prevent the formation of chips or burrs during machining operations.
Types of Cutting, Tapping, and Grinding Fluids
Cutting fluids come in a range of types including water-soluble oils, straight oils, semi-synthetic products, synthetic products, and misting systems. Each type of fluid has its own unique characteristics that make it suitable for specific applications such as tapping or grinding. For example, water-soluble oils provide better cooling than straight oils but may not offer the same protection against corrosion.
How Cutting, Tapping, and Grinding Fluids are Made
Cutting fluids are typically made up of a base oil combined with emulsifiers or surfactants to create an emulsion. Additives such as corrosion inhibitors or extreme pressure additives may also be added to enhance performance. The ingredients are blended together using specialized equipment before being tested for quality assurance.
Industries that use Cutting, Tapping, and Grinding Fluids
Cutting fluids are commonly used in manufacturing industries such as automotive production lines where they are applied directly onto parts prior to machining operations. They can also be used in welding processes where they provide lubrication between two surfaces being joined together by heat. In addition to this they can also be used for general purpose lubrication when drilling holes into metals.
Find the Cutting, Tapping, And Grinding Fluids You Need at Zoro
Looking for a specific item? Use our robust search tool to find it by name or keyword, or use our handy filters to narrow down our full assortment. You can also check out our whole selection of cutting, tapping, and grinding fluids, along with other tools or equipment to ensure you have all you need to tackle the job, especially if you're taking on a DIY project for the first time.
Plus, when you shop at Zoro, you'll always enjoy competitive prices on tons of great brands you know and trust. We make the shopping experience as fast and seamless as possible with free shipping on orders over $50 for registered users, Net 30 payment terms for qualifying customers, and an unparalleled customer service experience.