126 Results for Cutting Pliers by GEDORE
Key Features:
- Features: Precision Machined, Oil Hardened and Annealed
- Handle Type: Dipped
- Jaw Length: 68mm
Key Features:
- Features: 60 Degrees Angled; Fatigue-Free Working; High Cutting Performance; Induction-Hardened Precision Cutting Edges, Hardness 63-65 HRC; Hot-Drop Forged
- Handle Type: 2-Component
- Jaw Length: 46mm
Key Features:
- Features: Euro Pattern; Medium-Hard Wire, 1.6 mm; Induction-Hardened Precision Cutting Edges, Hardness 62-64 HRC
- Handle Type: Dipped
- Jaw Length: 38mm
Key Features:
- Features: Induction-Rehardened Cutting Edges, 59-61 HRC, Faces Phosphated; Wide, Needle-Point Head; Cutting Edges Angled 21 Degrees Without Bevel; Cutting Values: Copper Wire: max. 1.3 mm/AWG 16
- Handle Type: 2-Component, Secure Grip
- Material: Hardened and Tempered Steel
Key Features:
- Features: Cutting Edges Angled 21 Degrees, Slight Bevel, Hardness 62 HRC; Cutting values: Copper Wire: Max. 2.0 mm/AWG 12; Medium-Hard Wire: Max. 1.6 mm/AWG 14; Piano Wire: Max. 0.6 mm/AWG 22
- Material: Tungsten-Carbide
- Overall Length: 8"
Key Features:
- Features: Induction-Rehardened Cutting Edges, 59-61 HRC, Faces Phosphated; Sharp, Narrow Needle-Point Head; Cutting Edges Angled 21 Degrees; Cutting Values: Copper Wire: Max. 0.8 mm/AWG 20
- Handle Type: 2-Component, Secure Grip
- Material: Hardened and Tempered Steel
Key Features:
- Features: Induction-Hardened Precision Cutting Edges, Hardness 63-65 HRC; Medium-Hard Wire, 1.6 mm; Two-Ply Check-Tool Insulation
- Handle Type: VDE Insulating Sleeves
- Jaw Length: 18.5mm
Key Features:
- Features: Swedish Pattern; Slender Head-Ideal for Confined Spaces; Induction-Hardened Precision Cutting Edges, Hardness 63-65 HRC; For Medium-Hard Wire, 1.6 mm; Handle Protectors
- Handle Type: Dipped
- Jaw Length: 19mm
Key Features:
- Features: Induction-Rehardened Cutting Edges, 59-61 HRC, Faces Phosphated; Wide, Needle-Point Head; Cutting Edges Angled 21 Degrees Without Bevel; Cutting Values: Copper Wire: max. 1.3 mm/AWG 16; Medium-Hard Wire: Max. 1.0 mm/AWG 18
- Handle Type: 2-Component, Secure Grip
- Material: Hardened and Tempered Steel
Key Features:
- Features: Good Lever Action for Easy Cutting; Induction-Hardened Precision Cutting Edges, Hardness 63-65 HRC; Max. Cutting Capacity Dia 1.4-2.0 mm; Drop-Forged, Oil-Hardened and Annealed
- Handle Type: Dipped
- Jaw Length: 22mm
Key Features:
- Features: Precision Machined, Oil Hardened and Annealed
- Handle Type: Dipped
- Jaw Length: 41mm
Key Features:
- Features: Precision Machined, Oil Hardened and Annealed
- Handle Type: Dipped
- Jaw Length: 39mm
Key Features:
- Features: Multipurpose Tool for Cutting, Stripping and Terminal Crimping
- Jaw Length: 40mm
- Overall Length: 175mm
Key Features:
- Features: Precision Machined, Oil Hardened and Annealed
- Handle Type: Dipped
- Jaw Length: 41mm
Key Features:
- Features: Toothed Bracket Stops the Pliers Legs from Straddling Beyond the Permitted Working Area; Safe Working Even in Hidden Fitting Positions; Locking Pin can be Replaced; Precision Machined, Oil Hardened and Annealed; Ratcheting Mechanism; Handle Recesses
- Handle Type: Lockable Lever
- Jaw Width: 4-13/16"-11-7/8"
Key Features:
- Features: Hard Wire/Piano Wire 1.6 mm; Double-Jointed for Maximum Cutting Performance
- Handle Type: Lever
- Material: Steel
Key Features:
- Features: Good Lever Action for Easy Cutting; Induction-Hardened Precision Cutting Edges, Hardness 63-65 HRC; Hard Wire/Piano Wire 1.6 mm; Drop-Forged, Oil-Hardened and Annealed; Secure-Grip Hand Protection
- Handle Type: 2-Component
- Jaw Length: 6mm
Key Features:
- Features: Standard Heavy-Duty; Induction-Hardened Precision Cutting Edges, Hardness 61-63 HRC
- Handle Type: Dipped, Non-Slip
- Jaw Length: 23mm
Key Features:
- Material: Hardened and Tempered Steel
- Voltage Rating: 1000V
- Finish: Chrome plated
Key Features:
- Features: Good Lever Action for Easy Cutting; Induction-Hardened Precision Cutting Edges, Hardness 63-65 HRC; Max. Cutting Capacity Dia 1.4-2.0 mm; Drop-Forged, Oil-Hardened and Annealed
- Handle Type: 2-Component
- Jaw Length: 19mm
Key Features:
- Features: Wide Head and Long Cutting Faces; High Cutting Performance; Induction-Hardened Precision Cutting Edges, Hardness 61-63 HRC; Cutting Values: Hard Steel: 0.4 mm/AWG 26, Soft Steel: 1.0 mm/AWG 18, Copper Wire: 1.5 mm/AWG 15
- Overall Length: 135mm
- Cut: Bevel
Key Features:
- Features: German Pattern; Reinforced Type; Lay-On Cutter Box; Medium-Hard Wire, 1.6 mm; Induction-Hardened Precision Cutting Edges, Hardness 62-64 HRC
- Handle Type: Dipped
- Jaw Length: 38mm
Key Features:
- Features: Good Lever Action for Easy Cutting; To Cut All Wire Types Including Piano wire, 1.6 mm; Drop-Forged, Oil-Hardened and Annealed; Roughly Toothed Gripping Surfaces for Securely Holding Screws, Pipes etc.,
- Handle Type: Dipped, Non-Slip
- Jaw Length: 39.5mm
Key Features:
- Features: Good Lever Action for Easy Cutting; Induction-Hardened Precision Cutting Edges, Hardness 63-65 HRC; Max. Cutting Capacity Dia 1.4-2.0 mm; Drop-Forged, Oil-Hardened and Annealed
- Handle Type: 2-Component
- Jaw Length: 22mm
Key Features:
- Features: Induction-Hardened Precision Cutting Edges, Hardness 63-65 HRC; Max. Cutting Capacity Dia 1.8-2.0 mm; Two-Ply Check-Tool Insulation
- Handle Type: VDE Dipped
- Jaw Length: 22mm
Key Features:
- Features: 30 Degrees Angled Cutting Edge; Induction-Hardened Precision Cutting Edges, 61-63 HRC; Cutting Values: Soft Steel: 0.6 mm/AWG 22, Copper Wire: 0.8 mm/AWG 20
- Overall Length: 135mm
- Cut: Bevel
Key Features:
- Features: Good Lever Action for Easy Cutting; Induction-Hardened Precision Cutting Edges, Hardness 63-65 HRC; Max. Cutting Capacity Dia 1.4-2.0 mm; Drop-Forged, Oil-Hardened and Annealed
- Handle Type: 2-Component
- Jaw Length: 22mm
Key Features:
- Features: Induction-Rehardened Cutting Edges, 59-61 HRC, Faces Phosphated; Wide, Needle-Point Head; Cutting Edges Angled 21 Degrees; Cutting Values: Copper Wire: Max. 2 mm/AWG 12; Medium-Hard Wire: Max. 1.6 mm/AWG 14
- Handle Type: 2-Component, Secure Grip
- Material: Hardened and Tempered Steel
Key Features:
- Features: Induction-Rehardened Cutting Edges, 59-61 HRC, Faces Phosphated; Wide, Needle-Point Head; Cutting Edges Angled 48 Degrees Without Bevel; Copper Wire: Max. 1.3 mm/AWG 16
- Handle Type: 2-Component, Secure Grip
- Material: Hardened and Tempered Steel
Key Features:
- Features: Double-Lever Mechanism for Maximum Cutting Performance
- Handle Type: Lever
- Material: C65 Tool Steel, Fully Forged
Key Features:
- Features: Induction-Hardened Precision Cutting Edges, 61-63 HRC; Cutting Values: Hard wire: 0.4 mm/AWG 26, Soft Steel: 1.0 mm/AWG 18, Copper Wire: 1.2 mm/AWG 16
- Overall Length: 125mm
- Cut: Bevel
Key Features:
- Features: Good Lever Action for Easy Cutting; Induction-Hardened Precision Cutting Edges, Hardness 63-65 HRC; Hard Wire/Piano Wire 1.6 mm; Drop-Forged, Oil-Hardened and Annealed
- Handle Type: Dipped
- Jaw Length: 6mm
Key Features:
- Features: Good Lever Action for Easy Cutting; Induction-Hardened Precision Cutting Edges, Hardness 63-65 HRC; Max. Cutting Capacity Dia 1.4-2.0 mm; Drop-Forged, Oil-Hardened and Annealed
- Handle Type: 2-Component
- Jaw Length: 17mm
Key Features:
- Features: Euro Pattern; Medium-Hard Wire, 1.6 mm; Induction-Hardened Precision Cutting Edges, Hardness 62-64 HRC
- Handle Type: Dipped
- Jaw Length: 34mm
Key Features:
- Features: Euro Pattern; Medium-Hard Wire, 1.6 mm; Induction-Hardened Precision Cutting Edges, Hardness 62-64 HRC
- Handle Type: Dipped
- Jaw Length: 42mm
Key Features:
- Features: Good Lever Action for Easy Cutting; Induction-Hardened Precision Cutting Edges, Hardness 62-64 HRC; To Cut all Wire Types Including Piano Wire, 1.6 mm; Two-Ply Check-Tool Insulation
- Handle Type: VDE Dipped
- Jaw Length: 38mm
About Cutting Pliers
Cutting pliers are versatile tools designed for precision and power, making them essential for a variety of tasks across different industries. They come in various types to cater to specific cutting needs, from diagonal cutters ideal for snipping wires and cables, lineman's pliers for heavy-duty jobs like cutting through thick wires or bolts, needle-nose pliers that access tight spaces easily, end-cutting pliers perfect for rigid materials like nails and screws, to cable cutters meant specifically for cleanly severing coaxial and electrical cables. These tools are made from durable steel with hardened jaws ensuring strength and durability while their plastic grip handles provide comfort during prolonged use. Whether you're involved in home repairs, crafting projects, automotive maintenance or jewelry making; the sharp jaws of cutting pliers offer clean and efficient cuts every time.