1,500+ Results for Cutting Pliers - Page 11
Key Features:
- Features: Unique Pivoting Design Cuts With 40% Less Force; Compound Design Puts More Force Behind the Cutting Edge Compared to Traditional Pliers; Induction-Hardened Cutting Edge for a Long Blade Life; Meets or Exceeds Applicable ASME Performance Requirements
- Handle Type: Dual Material, Ergonomic Grip
- Material: Forged steel
Key Features:
- Material: Steel
- Overall Length: 7 in
- Tether Capable: Tether Capable
Key Features:
- Features: Extremely Smooth Movement For Minimum Operator Fatigue, Ground, Joint With Stainless Steel Rivet
- Handle Type: Multi-Component Grip
- Jaw Length: 1/4 in
Key Features:
- Features: Approx. 20 % Lighter Than Conventional Electronics Pliers, Forged, Manifold Oil-Hardened, Very Precisely Ground and Sharp Cutting Edges With Very Small Bevels for Precise Cutting Work on Small Electronic Components
- Handle Type: Dipped Pistol Grip
- Jaw Length: 1/4 in
Key Features:
- Features: Elastic Precision Points, Forged, Oil-Hardened
- Handle Type: Cushion Grip
- Jaw Length: 2 7/8 in
Key Features:
- Features: Anvil Style Cutting Edges, Laser Heat-Treated Cutting Edges, Precision-Machined Knife
- Handle Type: Ergonomic
- Jaw Length: 3/4 in
Key Features:
- Features: Clean Cutting of Thin Copper Wires, Narrow Head Style for Use in Confined Areas
- Handle Type: Plastic Coated
- Jaw Length: 1 in
Key Features:
- Overall Length: 60
- Plier Item: Flush Cutter
- Size: 120mm
Key Features:
- Features: Approx. 20 % Lighter Than Conventional Electronics Pliers, Forged, Manifold Oil-Hardened, Very Precisely Ground and Sharp Cutting Edges With Very Small Bevels for Precise Cutting Work on Small Electronic Components
- Handle Type: Ergonomic
- Jaw Length: 3/8 in
Key Features:
- Features: For Close Cutting of Gates and Sprue
- Handle Type: Dipped Pistol Grip
- Jaw Length: 5/8 in
Key Features:
- Features: Corrosion-Resistant
- Handle Type: Ergonomic
- Jaw Length: 3/4 in
Key Features:
- Features: Induction Hardened Cutting Knives for Long Life; Hot Riveted Joint Ensures Smooth Action and No Handle Wobble; Sure-Gripping Cross-Hatched Knurled Jaws
- Handle Type: Dual Material
- Jaw Length: 1-9/32"
Key Features:
- Features: 60 Degrees Angled; Fatigue-Free Working; High Cutting Performance; Induction-Hardened Precision Cutting Edges, Hardness 63-65 HRC; Hot-Drop Forged
- Handle Type: 2-Component
- Jaw Length: 46mm
Key Features:
- Overall Length: 60
- Size: 110mm
- Nominal Length: 120
Key Features:
- Jaw Length: 12mm
- Material: Steel
- Application: Very Delicate Work
Key Features:
- Material: Steel
- Width: 3.6 in.
- Color: Red
Key Features:
- Features: Dual Leaf Spring Design, Hardened and Tempered Jaws for Strength and Durability, Slip-Resistant Electro-Static Discharge (ESD) Cushioned Grips
- Handle Type: Dipped Pistol Grip
- Jaw Length: 1 in
Key Features:
- Features: Approx. 20 % Lighter Than Conventional Electronics Pliers, Forged, Manifold Oil-Hardened, Very Precisely Ground and Sharp Cutting Edges With Very Small Bevels for Precise Cutting Work on Small Electronic Components
- Handle Type: Ergonomic
- Jaw Length: 1 in
Key Features:
- Material: Tool steel
- Overall Length: 6.3"
- Tether Capable: Standard Tool (Accessory Needed for Tethering)
Key Features:
- Features: Designed Specifically for Cutting Integrated Circuit Pins; Narrow Cutting Head Angled At 45 Degrees for Access Into Dense Areas
- Handle Type: Ergonomic Grip
- Jaw Length: 8mm
Key Features:
- Features: High Leverage Design for 30% More Cutting Power; Induction Hardened Cutting Edges; 25 Degrees Angled Diagonal Cutters
- Handle Type: Plastic Coated
- Jaw Length: 1 in
Key Features:
- Features: Ergonomic Handle
- Handle Type: Multi-Component Covers
- Jaw Length: 1 1/2 in
Key Features:
- Features: Able to Hammer, Easy Tip Installation and Removal, Grips and Draws Out Wire, Used for Installation and Removal of Bushings and Nozzle
- Jaw Length: 2 5/8 in
- Jaw Width: 1/2 in
Key Features:
- Item: Flush Cutter,8" High Leverage Flush Cut
Key Features:
- Item: Cutter Oblique Nipper16Awgfull Flush
Key Features:
- Features: Double Hinge Design by Reapplying the Tool to the Cut, Great for Rough and Very Fine Cutting, High Leverage Diagonal Cutter With Patented Double Joint
- Cut: Beval
- Tether Capable: Standard Tool (Accessory Needed for Tethering)
Key Features:
- Features: Continuous Use, For Very Tough, High Cutting Performance With Minimum Effort Due to Optimum Co-Ordination of the Cutting Edge Angle and Transmission Ratio
- Handle Type: Multi-Component Grip
- Jaw Length: 2 in
Key Features:
- Application: Electrical
- Item: Electrical Installation Pliers
- Insulated: No
Key Features:
- Features: Induction Hardened Cutting Edge
- Handle Type: Dipped
- Jaw Length: 7/8 in
Key Features:
- Features: Nonslip Tips
- Material: Chrome Vanadium Steel
- Overall Length: 6 3/4 in
Key Features:
- Overall Length: 12 in
- Application: Removes and Installs Shoe Return Springs on Most Drum Breaks
- Number of Pieces: 1
Key Features:
- Jaw Width: 3
- Overall Length: 8.5
- Item: Precision Cutter,Flush Cut,5"
Key Features:
- Features: Dual Leaf Springs
- Item: Diagonal Cutting Plier
- Material: Carbon Steel
About Cutting Pliers
Cutting pliers are versatile tools designed for precision and power, making them essential for a variety of tasks across different industries. They come in various types to cater to specific cutting needs, from diagonal cutters ideal for snipping wires and cables, lineman's pliers for heavy-duty jobs like cutting through thick wires or bolts, needle-nose pliers that access tight spaces easily, end-cutting pliers perfect for rigid materials like nails and screws, to cable cutters meant specifically for cleanly severing coaxial and electrical cables. These tools are made from durable steel with hardened jaws ensuring strength and durability while their plastic grip handles provide comfort during prolonged use. Whether you're involved in home repairs, crafting projects, automotive maintenance or jewelry making; the sharp jaws of cutting pliers offer clean and efficient cuts every time.