4,500+ Results for MITUTOYO - Page 5
Mfr # 342-361-30
Key Features:
- Item: Point Micrometer
- Resolution: 0.00005"/0.001mm
- Range: 0 to 1"/0 to 25.4mm
Mfr # 552-316-10
Key Features:
- Caliper Grouping: Digital Caliper
- Resolution: 0.0005 in/0.01 mm
- Accuracy: +/-0.005 in
Mfr # 547-400A
Key Features:
- Promotion Restriction: Not eligible for promotion
- Locking Device: -
- Features: SPC Output
Mfr # 02AZD810D
Key Features:
- Item: U-Wave Receiver
- For Use With: Digimatic Micrometer
- Width (In.): 3-1/8
Mfr # 513-402-10T
Key Features:
- Graduations: 0.0005 in
- Range: 0 in to 0.03 in
- Features: Jeweled bearings, Glare-free crystal with scratch-resistant coating, Water and dust resistant, No-clutch structure
Mfr # 505-742-54J
Key Features:
- Item: Dial Caliper
- Includes: Fitted case
- Features: Lapped Jaws, Inverted Covered Rack and Dial Movement
Mfr # 141776
Key Features:
- Impact Rated: No
- For Use With Mfr. Model Number: 505 Series Dial Caliper
- Fits Brand: Mitutoyo
Mfr # 103-930
Key Features:
- Item: Mechanical Outside Micrometer Set
- Micrometers Included: 1 in, 2 in, 3 in, 4 in
- Range: 0 in to 4 in
Mfr # 985-120
Key Features:
- Number of Pieces: 8
- Material: Brass
- Item: Drive Pin Punch Set
Mfr # 3426A-19
Key Features:
- Graduations: 0 in
- Range: 0 in to 3 in
- Accuracy: +/-0.001 in
Mfr # 05CZA663
Key Features:
- For Use With: Digimatic Micrometer
- Item: Data Output Cable
- Width (In.): -
Mfr # 182-105
Key Features:
- Length (In.): 6 in
- Material: Stainless Steel
- Graduations: 1/2mm, 1mm, 32nds, 64ths
Mfr # 505-742-52J
Key Features:
- Item: Dial Caliper
- Includes: Fitted case
- Features: Lapped Jaws, Inverted Covered Rack and Dial Movement
Mfr # 527-313-50
Key Features:
- Item: Dial Depth Gauge
- SPC Output: No
- Base Style: Full
Mfr # 511-932-20
Key Features:
- Item: Mechanical Bore Gauge
- Contact Point Material: Carbide
- Requires Indicator: Yes
Mfr # 513-504-10T
Key Features:
- Graduations: 0.0001 in
- Range: 0 in to 0.01 in
- Features: Jeweled Bearings Assure Higher Sensitivity and Accuracy; Reversible Measuring Direction; Fully Adjustable Bezel/Dial Face; Contact Point is Adjustable within 220 Degrees; Bezel is Sealed with on O-Ring to Keep Out Water/Oil
Mfr # 500-160-30
Key Features:
- Caliper Grouping: Digital Caliper
- Resolution: 0.0005 in/0.01 mm
- Accuracy: +/-0.001 in
Mfr # 505-742-56J
Key Features:
- Item: Dial Caliper
- Includes: Fitted case
- Features: Lapped Jaws, Inverted Covered Rack and Dial Movement
Mfr # 295-153
Key Features:
- Item: Spherical Face Micrometer
- Resolution: 0.0001"
- Range: 0 to 1"
Mfr # 950-203
Key Features:
- Item: Sheet Metal Thickness Gauge
- Measuring Range (In.): Gage No. 0 to 36 (Ferrous)
- Graduations: Gage No. 0 to 36
Mfr # 192-671-10
Key Features:
- Item: Digital Height Gauge
- Type: Electronic Digital
- Display: LCD
Mfr # 905338
Key Features:
- For Use With: Calipers, Depth Gauges, Height Gauges, Indicators, Scale Unit, Thickness Gauges
- Item: Data Output Cable
- Pins: -
Mfr # 950-300
Key Features:
- Length (In.): 6 in
- Material: Stainless Steel
- Graduations: 1mm, 64ths
Mfr # 02AZD730G
Key Features:
- Item: U-Wave Transmitter
- Length (In.): 1-3/4
- Includes: Battery
Mfr # 1410A
Key Features:
- Graduations: 0.001 in
- Range: 0 in to 0.25 in
- Features: Stem Dia. 3/8" #4-48 UNF Thread; With Lug Back
Mfr # 050103
Key Features:
- Item: Edge & Center Finder
- End Type: Double
- Tip Dia. (In.): 0.2
Mfr # 188-111
Key Features:
- Item: Thread Pitch Gauge Set
- Construction: Steel Case With Folding Leaves
- Thread Angle (Deg.): 60
Mfr # 293-345-30
Key Features:
- Item: Coolant-proof Micrometer
- Resolution: 0.00005"/0.001mm
- Range: 1 to 2"/25.4 to 50.8mm
Mfr # 182-207
Key Features:
- Length (In.): 6 in
- Material: Stainless Steel
- Graduations: 1/2mm, 100ths, 10ths, 1mm
Mfr # 139-201
Key Features:
- Item: Tubular Inside Micrometer Head
- Resolution: 0.001"/0.01mm
- Range: 1.5 to 12"
Mfr # 64PKA058C
Key Features:
- Item: Digital Readout Scale & Counter DRO Mill Kit
- Type: Linear Scale Kit with KA Counter and 2 Scales
- For Use With: Lathes, Milling Machines
Mfr # 513-472-10E
Key Features:
- Graduations: 0.0005 in
- Range: 0 in to 0.03 in
- Features: Performs Easy and Accurate Measurement; No-Clutch Structure for Automatic Reversal of Measuring Direction; One-Piece Bezel and Crystal Design with O-Ring Provide Resistance to Water and Dust; High Sensitivity and Quick Response; Glare-Free Flat Crystal Face has a Scratch-Resistant Coating
Mfr # 103-922
Key Features:
- Item: Mechanical Outside Micrometer Set
- Micrometers Included: 1 in, 2 in, 3 in
- Range: 0 in to 3 in