Asimeto Impact Hardness Tester

- Large screen (128x64 dot matrix LCD), allows for clear display of all functions and parameters - Hardness test can be taken at any angle including inverted. - A wide measuring range supports the hardness of all metallic materials. Hardness results are directly displayed in HRB, HHRC, HV, HB, HS, HL hardness scales. - Diameter of carbide ball: 3mm. - Large capacity memory storage of 500 sub groups. Stored information including single measured value, mean value, test data, impact direction, impact times, material and hardness scale are available. -¬è Upper and lower limit can be preset. An audio alarm will automatically sound when the reading is outside of the preset limits. - Battery voltage information is displayed including the charge status. - Calibration function is available. - USB1.1 port allows for information to be uploaded directly to a PC. -¬è High speed thermal printer allows for the readings to be immediately printed. -6V Ni-MH rechargeable battery are supplied. The batteries can be charged with the integrated charger. Up to 150 hours of continuous operation battery life between charges. (eL off and no printing) - Automatic power off after five minutes. - Range: (170-860)HLD, (17-68.5)HRC, (19-651)HB - Accuracy: HLD: ±5, HRC: ±1, HB: ±4 - With - Impact device - Hardness test block - Small support ring - Cleaning brush - Battery charger - Paper for printing - Manual - DataPro software - Communication cable