5,500+ Results for Toolholder Accessories - Page 17
Key Features:
- Item: Hydraulic Chuck
- Style: Coolant Through
- For Use With: Hydraulic Holders
Key Features:
- Item: Retention Knob
- Flange to Angle Length: 27.95mm
- Thread Size: M16
Key Features:
- Item: Lathe Jaw
- For Use With: 8 in Chucks
- Length: 8.00"
Key Features:
- Primary Application: Latch type toggle clamps GN 852 are used for very high holding forces, as may be required in plastic high pressure mold forming.
- Width: 80mm
- Length: 271mm
Key Features:
- Thread Size: 3/8 x 24"
- Length: 52mm
- Primary Application: Clevis fork heads WN 71752 are mainly used with pneumatic or hydraulic cylinders.
Key Features:
- Knob Dia.: 13mm
- Angle: 13°
- Material: Bearing socket - Stainless steel 316, Ring - Stainless steel 420
Key Features:
- Item: Retention Knob
- Knob Dia.: 0.904"
- Flange to Angle Length: 1.3780 in
Key Features:
- Thread Size: 1/2 x 20L"
- Length: 72mm
- Finish: Blue passivated finish
Key Features:
- Finish: Powder coated, textured
- Material: Zinc die-cast
- Primary Application: The adjustment screw in GN 437 hinges allows the movement of the hinge to be constrained and adds a friction adjustment which controls the swinging of doors and flaps to eliminate inadvertent movement.
Key Features:
- Thread Size: 1/2 X 13"
- Finish: Matte shot-blasted finish
- Primary Application: The solid rubber pad of leveling feet GN 33 is firmly embedded in the stainles steel base and secured by a screw loctited into place. The leveling feet can be screwed to the mounting surface using the mounting flange, which prevents lateral slippage.
Key Features:
- Thread Size: M16
- Material: Stainless steel 303
- Includes: Elastomer rubber cap
Key Features:
- Thread Size: 5/8 X 11"
- Primary Application: The solid rubber pad of leveling feet GN 33 is firmly embedded in the stainles steel base and secured by a screw loctited into place. The leveling feet can be screwed to the mounting surface using the mounting flange, which prevents lateral slippage.
- Features: External hex, tapped socket type
Key Features:
- Item: Lathe Jaw
- For Use With: 8 in Quick Change Chucks
- Number of Pieces: 3
Key Features:
- Knob Dia.: 32mm
- Angle: 15°
- Features: Self-lubricating
Key Features:
- Color: Black
- Primary Application: Latch type toggle clamps GN 852 are used for very high holding forces, as may be required in plastic high pressure mold forming.
- Finish: Blackened finish
Key Features:
- Thread Size: 3/8 x 24"
- Includes: Pin with snap-on securing collar
- Primary Application: Clevis fork joints WN 751 are mainly used with pneumatic or hydraulic cylinders. They consist of a clevis fork head and a pin with snap-on securing collar.
Key Features:
- Thickness: 37mm
- Features: 2x2 tapped inserts
- Finish: Matte finish
Key Features:
- Thread Size: M10
- Primary Application: The static load capacity of leveling feet GN 343.6 results from the permissible load capacity of the threaded stud (AISI 303). Under normal operating conditions, bending loads or angular loads are not uncommon and result in a reduction of the load capacity, which must be taken into consideration.
- Includes: Elastomer rubber cap
Key Features:
- Features: 2x2 bores for countersunk screws
- Width: 40mm
- Thickness: 13.5mm
Key Features:
- Thread Size: M12"
- Features: With plastic cap, gliding
- Material: Stainless steel 303
Key Features:
- Thread Size: 5/16 x 24"
- Length: 58mm
- Primary Application: Clevis fork joints WN 751 are mainly used with pneumatic or hydraulic cylinders. They consist of a clevis fork head and a pin with snap-on securing collar.
Key Features:
- Knob Dia.: 34mm
- Thread Size: M6
- Primary Application: Wing screws GP offer a comfortable two finger grip and expand the range of clamping applications.
Key Features:
- Thread Size: M12
- Finish: Matte
- Length: 3.70 in
About Toolholder Accessories
Toolholder Accessories are used in many industries and jobs for a variety of purposes. They can be used to hold, secure, and position tools for a variety of applications. Toolholder Accessories come in a wide range of styles and materials.
Types of Toolholder Accessories
Toolholder Accessories can include Retention Knobs, Collets, Chucks, Nuts, Clamping Kits, and many other types. Each type has its own purpose and is designed to fit the specific needs of the job or industry.
Materials Used for Toolholder Accessories
Toolholder accessories are usually made from steel or aluminum alloys. The material is chosen based on the application they will be used for. For example, Retention Knobs are often made from stainless steel due to its corrosion resistance.
Industries that use Toolholder Accessories
Toolholder accessories are commonly used in manufacturing industries such as automotive and aerospace. They are also widely used by professionals such as machinists who rely on them to securely hold tools while working on projects. Clamping Kits are often used to provide extra stability when working with heavy parts or components.
Find the Toolholder Accessories You Need at Zoro
Looking for a specific item? Use our robust search tool to find it by name or keyword, or use our handy filters to narrow down our full assortment. You can also check out our whole selection of tools & machining along with other tools or supplies to ensure you have all you need to tackle the job, especially if you're taking on a DIY project for the first time. Plus, when you shop at Zoro, you'll always enjoy competitive prices on tons of great brands you know and trust. We make the shopping experience as fast and seamless as possible with free shipping on orders over $50 for registered users, Net 30 payment terms for qualifying customers, and an unparalleled customer service experience.