81 Results for Power Distribution Blocks & Terminal Blocks by WEIDMULLER
WEIDMULLER
Key Features:
- Standards: IEC 60947-7-1
- Material: Wemid
- Rated cross-section: 2.5 mm²
Key Features:
- Material: Wemid
- Standards: IEC 60947-7-1
- Current size C (CSA): 50 A
Key Features:
- Height: 41.5 mm
- Width: 6.1 mm
- Type: SAK 2.5/EN
Key Features:
- Type: Cross-connector
- Material: PA 66
- Number of cross-connected terminals: 10
Key Features:
- Material: Wemid
- Standards: IEC 60947-7-1
- Wire connection cross section AWG, min.: AWG 28
Key Features:
- Type: MAK 2.5
- Standards: IEC 60947-7-1 (-7-2)
- Material: PA 66
Key Features:
- Standards: IEC 60947-7-1
- Material: Wemid
- Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, min.: 0.5 mm²
Key Features:
- Material: Wemid
- Standards: IEC 60947-7-1
- Wire connection cross-section, finely stranded, min.: 0.5 mm²
Key Features:
- Standards: IEC 60947-7-1
- Material: PA 66
- Tightening torque, min.: 0.5 Nm
Key Features:
- Standards: IEC 60947-7-3
- Material: Wemid
- Voltage size C (UR): 600 V
Key Features:
- Standards: IEC 60947-7-1
- Material: Wemid
- Wire cross-section, finely stranded, two clampable wires, max.: 1.5 mm²
Key Features:
- Number of Poles: 7
- Comparative Tracking Index (CTI): ≥550
- Rated current, min. number of poles (Tu=20°C): 17.5 A
Key Features:
- Type: Relay, 1 NC (voltage-free), NPN, PNP transistor, switching signal [input safe-side valve component], intrinsically safe circuit, digital, output = input, direct or inverse (configurable)
- Height (inches): 4.693 inch
- Device type: B
Key Features:
- Standards: IEC 60947-7-2
- Material: Wemid
- Open sides: right
Key Features:
- Number of Poles: 5
- Colour: orange
- Insulation strength: ≥108 Ω
Key Features:
- Number of Poles: 12
- Wire cross-section, AWG, max.: AWG 10
- Pitch in inches (P): 0.25 inch
Key Features:
- Number of Poles: 5
- Rated voltage for surge voltage class / pollution degree II/2: 320 V
- Short-time withstand current resistance: 3 x 1s with 72 A
Key Features:
- Number of Poles: 7
- Height (inches): 1.852 inch
- Insulation strength: ≥108 Ω
Key Features:
- Standards: IEC 60947-7-1, IEC 61984
- Material: Wemid
- Wire connection cross section, finely stranded, max.: 6 mm²
Key Features:
- Number of Poles: 8
- Solder eyelet hole diameter (D): 1.6 mm
- Solid, max. H05(07) V-U: 16 mm²
Key Features:
- Number of Poles: 18
- Approvals: CSA, EAC, UR
- Plugging force/pole, max.: 7 N
Key Features:
- Material: Wemid
- Standards: IEC 60947-7-2
- Tightening torque, max.: 1.3 Nm
Key Features:
- Height: 16.3 mm
- Width: 17.5 mm
- Depth: 1 mm
Key Features:
- Number of Poles: 3
- Rated current (Use group B / CSA): 65 A
- Operating temperature, max.: 120 °C
Key Features:
- Number of Poles: 4
- Insulating material group: IIIa
- Institute (cURus): cURus
Key Features:
- Number of Poles: 12
- Colour chart (similar): RAL 2000
- Number of Rows: 2
Key Features:
- Number of Poles: 4
- Certificate No. (cURus): E60693
- w. wire end ferrule, DIN 46228 pt 1, max.: 6 mm²
Key Features:
- Standards: In accordance with IEC 60947-7-1
- Material: Wemid
- Storage temperature, min.: 10 °C
Key Features:
- Number of Poles: 10
- Flexible, max. H05(07) V-K: 2.5 mm²
- Solid, min. H05(07) V-U: 0.5 mm²