Master Chemical Corporation
We have the master chemical corporation you need to get the job done right.
Shop Master Chemical Corporation results
(Showing 1 - 15)
Relevance
Mfr # MS485/5
Key Features:
- Series: MicroSol 485
- Specific Gravity: 1
- Cutting Fluid Sub-Category: Cutting Oils
Mfr # E206N/54
Key Features:
- Specific Gravity: 1
- Item: Coolant
- pH Value: 8.8 to 9.2 (Operating)
Mfr # E206N/5
Key Features:
- Series: E206
- Item: Coolant
- Container Style: Pail
Mfr # E206N/1
Key Features:
- Fluid Properties: Emulsion
- Features: Contains Highly Effective, Coolant Residue Removes With Water, Extreme-Pressure Additives To Control Built-Up Edge, Leaves Soft Protective Film, Or Aqueous Cleaners, Rejects Tramp Oil To Help Extend Sump Life And Increase Recycling Options, Working Solution
- Physical Form: Liquid
Mfr # E206
Key Features:
- Item: General Purpose Mold Release
- Container Size: 12 oz
- NSF Rating: Not Rated
Mfr # MS590XT/5
Key Features:
- Size: 5 gal.
- pH Value: 8.8 to 9.7
- Cutting Fluid Sub-Category: Cutting Oils
Mfr # SOL/5
Key Features:
- Features: And Fixtures , Chucks, Coolant Residue Is Easily Removed With Either Water, Leaves A Fluid, Nongumming Film To Prevent Sticky Ways, Or Aqueous Cleaners, Proven To Be Highly Effective In Controlling Built-Up Edge, Tool Holders, Working Solution
- Container Size: 5 gal
- Container Style: Pail
Mfr # SC520/5
Key Features:
- Item: Coolant
- Fragrance: Low Odor, Mild Odor
- pH Value: 9.6 to 10.0 (Operating), 10.2 to 10.6 (Concentrate)
Mfr # MS590XT/54
Key Features:
- Flash Point: Greater than 200 Degrees F
- Base Oil: Semi-Synthetic
- Fluid Type: Metal Cutting Fluid
Mfr # MS690XT/5
Key Features:
- Container Size: 5 gal
- Fragrance: Mild Amine
- Series: 690XT
Mfr # 10016E
Key Features:
- Features: And Improve Quality Of Cut, Cutting Fluid For All Operations To Increase Speed, Extend Tool Life
- Flash Point: 300 Degrees F
- Item: Cutting Oil
Mfr # MS585XT/54
Key Features:
- Container Type: Drum
- Features: Corrosion Inhibition On Cast Iron And Eliminates Hot Chip And Clinkering Problems, Excellent Alternative To Chlorinated Soluble Oils On High-Silica Aluminum Alloys, High Lubricity, Micro Emulsion, No Sulfurized EP Additives
- Physical Form: Liquid
Mfr # 70830
Key Features:
- Fluid Type: Dark
- Container Style: Jug
- Cutting Fluid Sub-Category: Cutting Oils
Mfr # 10004E
Key Features:
- Specific Gravity: 1
- Container Size: 4 oz
- Cutting Fluid Sub-Category: Cutting Oils
Mfr # 14050
Key Features:
- Application: Ferrous and Non-Ferrous Metals, Including Brass, Copper and Aluminum
- Standards: NSF P1 Registered, OSHA Hazard Communication
- Container Type: Aerosol