44 Results for Service & Shop Tools by OEMTOOLS
Brand
OEMTOOLS
Mfr # 24444
Key Features:
- For Use With: The cooling system
- Weight: 4.75
- Width: 11.97
Mfr # 24936
Key Features:
- Height: 8.75
- Includes: Includes a 5 Ft. Main Suction Flexible Hose and 2 Dipstick Adapters
- Width: 8.75
Mfr # 25101
Key Features:
- Item: Magnetic Oil Filter Wrench
- Length (In.): 6.3
- Total Height (In.): 1.62
Mfr # 24538
Key Features:
- Item: U-Joint Puller
- For Use With: Seized U-joints on most class 7 and 8 trucks
- Weight: 11.75
Mfr # 24449
Key Features:
- Height: 12.8
- Application: The 5 Gallon Tire Bead Seater from OEMTOOLS is a simple, fast, and safe way to seat even the most difficult beads on tires from small 4" tires to large 24-1/2" truck tires. An air release valve delivers compressed air from a tank into the tire, blasting a large amount of air and lifting the tire bead onto the wheel rim, thus creating an air tight seal so the tire can be inflated.
- For Use With: Tire beads
Mfr # 24448
Key Features:
- Item: Ford Camshaft Alignment Tool Kit
- Height (In.): 0.1
- Length (In.): 11.9
Mfr # 27045
Key Features:
- Item: Tailpipe Cutter
- Application: The OEMTOOLS Tailpipe Cutter is designed for both on and off the car cutting of tailpipes and exhaust pipes with diameter ranging from 3/4" to 3-1/4" (19-83 mm). A cutting wheel on each roller provides smooth tracking.
- For Use On: Automotive tail pipes
Mfr # 24548
Key Features:
- Item: U-Joint Puller
- Application: Stop wasting time and energy hammering away at seized u-joints — the OEMTOOLS 24548 Intermediate U-Joint Puller safely and easily removes seized u-joints on intermediate trucks, buses and light industrial/farm equipment. This innovative tool can be used with a 1/2" drive impact wrench (or smaller) to quickly disassemble drive lines — all without damaging the driveshaft, yokes, joints or bearing cups.
- For Use With: Seized U-joints on intermediate trucks, busses and light industrial/farm equipment.
Mfr # 27306
Key Features:
- Item: Harmonic Balancer Pulley Installer
- Application: The OEMTOOLS Long Reach Harmonic Balancer/Pully Installer is used to install crank pulley or underdrive pullet on many later model Ford, GM, Dodge and Chrysler vehivles in V8 and V6 engines, with or without recessed threads.
- For Use With: Crank pulley or underdrive pulley on many late model Ford, GM, Dodge and Chrysler vehicles with V8 and V6 engines, with or without recessed threads.
Mfr # 24397
Key Features:
- For Use With: Includes a Dipstick Tube Adapter to Remove Fluids Directly from the Dipstick
- Length: 28.25
- Weight: 8.46
Mfr # 24985
Key Features:
- Height: 2.3
- Includes: Extension tube for accessing hard-to-reach filler necks and reservoirs.
- Width: 2.5
Mfr # 27261
Key Features:
- Item: Alternator Decoupler Pulley Tool Kit
- Includes: 2 Pulley Sockets (H22 x 33T and H17 x H19 x 30L) and 3 Shaft Bits (H10 x FM H10, T50 x H10 x 75L and M10 x H10 x 75L)
- Width: 3.5
Mfr # 20565
Key Features:
- Item: Compact Lug Nut Wrench
- Overall Length: 19.2
- Used For: Locked-up Lug Nuts
Mfr # 27213
Key Features:
- Item: Hun and Bearing Remover/Installer Kit
- Application: For removal and installation of front wheel hub and bearing on Asian, domestic and German vehicles as well as rear sheel hubs and bearings on Earopean vehicles. Its self-centering design is incredibly durable and easy-to-use. Importantly, the heavy duty thrust bearing reduces effort and considerably extends the life of the pressure screw. Includes adapter shoes, pusher washers, receiver sleeves, nut-bolt and heavy duty bearing.
- For Use With: Front wheel hub and bearings on Asian, domestic and German vehicles as well as rear wheel hubs and bearings on European vehicles.
Mfr # 24434
Key Features:
- Item: Ford Valve Spring Compressor
- Weight: 1
- For Use With: Ford Vehicals 3/8" ratchet or breaker bar.
Mfr # 24537
Key Features:
- Item: C-Frame Socket Press Set
- For Use With: Driveline and non-driveline parts
- Includes: Includes 1/4", 3/8" and 1/2" drive socket adapters & flat anvil attachments
Mfr # 24539
Key Features:
- Item: U-Joint Puller
- Application: Stop wasting time and energy hammering away at seized u-joints — the OEMTOOLS 24539 Automotive U-Joint Puller safely and easily removes seized u-joints on most passenger vehicles and light duty trucks. This innovative tool can be used with a 1/2" drive impact wrench (or smaller) to quickly disassemble drive lines; all without damaging the drive shaft, yokes, joints or bearing cups.
- For Use With: Seized U-joints on most passenger vehicles and light duty trucks.
Mfr # 24389
Key Features:
- Item: Harmonic Balancer Puller Kit
- Application: can be used to extract most fluid types: engine oil, transmission fluid, gear oil, coolant, power steering fluid.
- For Use With: most fluid types: engine oil, transmission fluid, gear oil, coolant, power steering fluid.
Mfr # 27311
Key Features:
- Weight: 1.45
- Application: Automotive power steering systems have a tendency to trap air in components and lines, causing erratic steering, pump noise and potential damage to critical parts. Then coupled with a hand vacuum pump the OEMTOOLS Power Steering Bleeder Kit will allow user to help remove trapped air in Power Steering and Brake System components and lines. Includes 2 EPDM tapered rubber adapters to fit most power steering pumps and reservoirs, a reservoir bottle to protect hand vacuum pumps and 3 sizes of break bleeder adapters. Includes a sturdy blow mold case.
- For Use With: Power Steering and Brake System components and lines.
Mfr # 25202
Key Features:
- Item: Ball Joint Separator
- For Use With: Ball joint
- Weight: 1.65
Mfr # 24429
Key Features:
- Item: Valve Spring Compressor
- Height (In.): 1.3
- Length (In.): 7.2
Mfr # 25265
Key Features:
- Weight: 1
- Application: This OEMTOOLS Disc Brake Pad Spreader is perfect for compressing inner brake pads and resetting pistons for easy pad replacement! Spreader works great in tight areas where C-Clamps cannot! Constructed from high carbon steel and high quality chrome vanadium steel for strength, durability and resistance to corrosion. Features of a large knob with a fine thread driver for easy tuning.
- For Use With: Brake pads
Mfr # 25219
Key Features:
- Item: Hydraylic Ball Joint Seperator
- Application: Hammering away at ball joints is a technique of the past — the OEMTOOLS 25219 Hydraulic Ball Joint Separator provides the professional with a safe and effective system to separate ball joints. Equipped with a hydraulic ram rated to 8 tons, this tool will stand up to the toughest jobs. Still working hard on ball joint jobs? Work smarter with OEMTOOLS.
- For Use With: Ball joint
Mfr # 24398
Key Features:
- Item: Fuel Tank Lock Ring Tool
- For Use With: fuel tank lock ring in these vehicles: Ford F-150 trucks (2004 - newer), Chrysler/Dodge Mini-vans (2004 - newer), PT Cruiser, Dakota, Durango, Chevy 1/2-ton and 3/4-ton trucks (2004 - newer).
- Length: 7.8
Mfr # 24549
Key Features:
- Item: Automotive Bearing Cup Installer
- Width: 5.3
- Height: 1.5
Mfr # 25156
Key Features:
- Item: Fuel Pump Module Spanner Wrench
- For Use With: Fuel pump retaining ring
- Length: 10.9
Mfr # 24441
Key Features:
- Width: 7.2
- Height: 7.6
- For Use With: Sealed automatic transmissions.
Mfr # 25553
Key Features:
- Item: Strut Spring Compressor
- Height (In.): 2.2
- Length: 12.8
Mfr # 20562
Key Features:
- Item: Truck Lug Nut Wrench
- Overall Length: 25
- Width: 25
Mfr # 27178
Key Features:
- Item: Tie Rod Tool Set
- Application: The OEMTOOLS 27178 Master Inner Tie Rod Tool Set makes it easy to remove and re-install inner tie rods without removing the rack and pinion. The inner tie rod removal set includes SAE and metirc adapters to handle a variety of make and models vehicles including larger tie rods found on many trucks and SUVs.
- For Use With: Tie rods