3,000+ Results for GREENLEE - Page 8
Mfr # 45505G
Key Features:
- Capacity: 22 to 8 AWG
- Primary Crimping Application: Electrical Wire and Cable
- Overall Length: 9 in
Mfr # 7706SB
Key Features:
- Capacity: 10 ga.
- For Use With: Non-Round Punches within the Capacity of the Tool
- Number of Pieces: 10
Mfr # HK12ID
Key Features:
- Capacity: 4 AWG to 1000 kcmil Cu, 6 AWG to 1000 kcmil Al
- Primary Crimping Application: Electrical Wire and Cable
- Overall Length: 26 in
Mfr # 0453-18C
Key Features:
- Item: Screw-Holding Phillips Screwdriver
- Tip Style Group: Phillips
- Screwdriver Tip Style: Phillips
Mfr # 0251-08D
Key Features:
- Features: Dual Cutting Edges, Laser-Hardened Blades, Rugged Riveted Construction
- Handle Type: Dipped Grip, Double Layered Vinyl Handle
- Jaw Length: 3/4 in
Mfr # 744
Key Features:
- Capacity: 10 ga.
- For Use With: For Battery-Powered, Hydraulic and Ram Drivers
- Number of Pieces: 9
Mfr # CRM-Q
Key Features:
- Color: Clear
- Size: 1 qt.
- Features: Cream Lube Compatible With All Cable Insulation Types, Dries To a Non-Conductive, Non-Hardening Residue, Reduces Waste, Non-Staining, Won't Break Down Or Separate
Mfr # 656
Key Features:
- Item: Ratcheting Reel Stand
- Material: Steel
- Width (In.): 24-1/2
Mfr # 7310SB
Key Features:
- Includes: Knockout Kit with Driver, Hand Pump and Slug-Buster Punches, Dies, Draw Studs for 1/2" to 2" and 2-1/2" to 4" Conduit; Adapter, Spacers, Kwik Stepper Step Bit in Plastic Case
- Conduit and Pipe Size: 2-1/2" to 4"
- Item: Punch Set, Hyd Driver
Mfr # 0453-14C
Key Features:
- Item: Screw-Holding Slotted Screwdriver
- Tip Style Group: Slotted
- Screwdriver Tip Style: Cabinet Tip
Mfr # 438-2X
Key Features:
- Length: 25 ft
- Tape Material: Steel
- Size: 0.030" Thickness
Mfr # 749
Key Features:
- Primary Application: ACSR, Piano Wire
- Overall Length: 28 in
- Cutting Action: Shear
Mfr # 441-3
Key Features:
- Item: Cable Puller Sheave
- Features: Self-Lubricating Bearings, Split Tube for Easy Removal After Cable is Installed, Yoke Frame Slides Into The End of Conduit and Holds Sheave, Allowing The Cable Being Fed Into The Conduit to Smoothly Roll Over The Sheave
- Material: Aluminum
Mfr # 9753-12C
Key Features:
- Item: Scratch Awl
- Overall Length (In.): 7 7/8 in
- Shank Length (In.): 3 1/2 in
Mfr # 625-1
Key Features:
- Item: 625 1 Inch Carbide Tipped Hole Cutter
Mfr # KD12CU
Key Features:
- Use With Tool Type - Crimper: Power
- Primary Application - Crimping: Electrical Wire and Cable Crimping
- Item: Upper and Lower Crimping Die Set
Mfr # 925-002
Key Features:
- Item: Pilot Drill Bit
- Overall Length: 1-29/32"
- Fits Hole Saw Dia.: 1-3/8" to 2-1/2"
Mfr # 774
Key Features:
- Primary Application: Cuts Aluminum, Copper and Communication Cable
- Overall Length: 19 1/4 in
- Cutting Action: Shear
Mfr # K2P-1-1/4-B
Key Features:
- Hole Size (In.): 1 45/64 in
- Item: Knockout Punch
- Number of Pieces: 1
Mfr # 438-5H
Key Features:
- Length: 50 ft
- Tape Material: Steel
- Size: 1/8"
Mfr # 1981
Key Features:
- Capacity: 8 AWG to 250 KCMIL Copper, 8 to 4/0 AWG Aluminum
- Primary Crimping Application: Electrical Wire and Cable
- Overall Length: 22 3/8 in
Mfr # K2P-1-1/2-B
Key Features:
- Hole Size (In.): 1 61/64 in
- Item: Knockout Punch
- Number of Pieces: 1
Mfr # K2P-1-B
Key Features:
- Hole Size (In.): 1 23/64 in
- Item: Knockout Punch
- Number of Pieces: 1
Mfr # 1941-5
Key Features:
- Impact Rated: No
- Item: BX/Flexible Metal Conduit Cutter Blades
- Includes: (5) Blades
Mfr # 740H-1-7/32
Key Features:
- Hole Size (In.): 1 21/100 in
- For Use With: Manual Wrench or Hydraulic Driver
- Material: Stainless Steel, Steel
Mfr # 0453-15C
Key Features:
- Item: Screw-Holding Slotted Screwdriver
- Tip Style Group: Slotted
- Screwdriver Tip Style: Cabinet Tip
Mfr # 608-5
Key Features:
- Color: Green
- Overall Length: 2 in
- Size: 1/2 in
Mfr # 35284
Key Features:
- Size: 9/16 in x 600 ft
- Item: Cable Pulling Rope
- Type: Double Braided Composite